Pro-Ject T2W Wi-Fi turntable – an example of a turntable with a digital output

The recent vinyl revival has been driven not just by the hipsters who saw the vinyl record as an ironic statement but also by people who grew up through most of the late 20th century where these records were the main music distribution format.

Some of these people even kept a music system that can play vinyl records along with a sizeable record collection, and kept putting these records on even when there was an expectation in the 90s and 2000s to move away from that format. In some cases, these people kept vinyl records that wouldn’t be reissued on any newer media. This is in addition to DJs who worked with vinyl records and, in some cases, used the turntable as a musical instrument.

As well, the turntable and a collection of classic-rock records by talent like the Beatles, Pink Floyd or Fleetwood Mac recently became an alternative to the motorcycle or sports car as a “mid-life crisis” symbol for men. This is because of these men were teenagers or young adults through the 1960s and 1970s where this kind of music was played on vinyl records using a reasonably-priced but good-sounding hi-fi system.

What are these turntables that have digital outputs

VinylPlay – an integrated-phono-stage turntable that raises the bar for this class of turntable

As part of the vinyl revival, nearly all turntable or record-player manufacturers are offering at least one turntable or record player with a digital output of some sort like Bluetooth, Wi-Fi or USB or a digital recording subsystem.

Nearly all of this equipment has the customary “from-the-cartridge” analogue output that can be a raw phono-grade signal for use by amplifiers with a PHONO input, or an amplified line-level signal for equipment that only has a line-level input. This would be in addition to the digital sound path mentioned above and would permit, in the case of a Bluetooth turntable that you used with a Bluetooth speaker, you to upgrade towards a better hi-fi setup with an integrated amplifier and pair of speakers.

There are some record players that use digital inputs like Bluetooth or USB as an “external-equipment” programme source for their onboard amplifier which amplifies the sound for integrated or connected speakers. But the turntables are their to work with a separate amplifier or sound system.

Why do these turntables and record players exist

A few reasons these turntables and record players have appeared include people dabbling in vinyl for the first time and using Bluetooth headphones or speakers as their initial audio setup. Or your audio system uses am amplifier that omits a tape loop connection to connect a recording device to but you want to record your vinyl records to your computer for mobile use or to salvage them.

The audio signal path in these turntables

The signal path from the moving-magnet cartridge that follows your record’s grooves is sent via a preamplifier that brings the music signal to a stronger line-level signal, then to the analogue-digital conversion circuitry which converts the analogue signal to a digital signal for the digital use case. This is similar to a regular turntable that is connected to an amplifier that implements digital signal processing or “digital-to-the-speaker” amplification like some new Technics amplifiers do.

The digital use cases that come about for these turntables are:

• Bluetooth audio source which works wirelessly with Bluetooth speakers or headphones
• Wi-Fi or Ethernet home network connection to work with a network-based multiroom audio setup or DLNA-compliant audio setup
• USB Audio Device class source connection so you can plug the turntable in to your computer to record that LP using digital-audio-workstation software
• Digital recorder subsystem to record that LP to a USB memory stick or similar storage device

These will still play your records properly

All of these turntables are engineered in a similar way to most of the other well-bred turntables that exist out there. Typically this is because these turntables are part of a series of products offered by a manufacturer that share a common design and are offered as an “extra feature” model in the series. The moving-magnet pick-up cartridges used on these turntables are of the same expectation for something that would be on the end of a decent turntable’s tonearm.

As well, they still maintain that traditional record-playing experience with most offering a fully-manual operation approach. Or some units have some form of automatic operation such as for themselves to lift the tonearm off the record at the end of the side or to have you press a button or move a lever to have the tonearm move to the start of the record and commence playing then park itself at the end of the record. Of course, the tonearm on these turntables is equipped with a cueing lever to protect the stylus when you lift the arm on to the record.

Analogue purists will not like the idea of these digital-output turntables because they expect the audio signal to travel from the pickup cartridge to the speakers via amplification that is purely analogue in nature. This is the same group who will not like analogue-digital-analogue amplification approaches that Technics, JBL and a few other names have been dabbling in. It is although these turntables offer the analogue audio output whether as a line-level output or as a “phono-level” output for external phono preamplifiers or amplifiers with their own phono-stage circuitry. As well, some of these turntables have a switch to turn off the power to the digital-audio circuitry which will benefit those who want that pure analogue sound that isn’t tarnished by any digital circuitry.

Some extra compromises may appear with this digital-audio approach. This can be where the analogue-to-digital circuitry may be sub-par or Bluetooth applications may limit the codec to SBC which is not really fit for hi-fi. Units that implement an on-board USB recorder function can be limited by the inability to select high-grade lossless audio filetypes like WAV or FLAC for recording.

You may also find that it may be difficult to set up the digital functionality in some of these turntables. For example, pairing a set of Bluetooth headphones to a Bluetooth turntable may be difficult, or the recording procedure may be difficult for a unit that implements its own USB recorder.

My comments about these digital-output turntables

Personally I would see the purchase of a turntable with digital output as being something that suits your particular needs. This could range from something that can facilitate salvaging cherished or way-out-of-print records using your computer, to use with your network-based multiroom audio system or to use with Bluetooth headphones or speakers.

Here, the purchasing of these turntables is made easier because you can refer to the “baseline” model of the same series to see whether they are something you would like to play your records on. On the other hand, if you are satisfied with your turntable and amplifier, you may not need to buy any of these turntables that have digital outputs.

It is more so where your amplifier has a line-level output independent of the volume control like a “tape output” typically used for cassette decks or other recording devices. In this case, you could connect up a USB sound module, Bluetooth transmit adaptor, network multiroom audio “on-ramp” adaptor or similar device to the amplifier to suit your digital audio needs. Some of you who own a record player or vinyl-capable three-piece music system may find that your equipment may have one of these line-level outputs.

These turntables don’t diminish the analogue character of vinyl records but are able to extend them to particular use cases such as to provide elementary private listening through Bluetooth headsets or salvaging them. Here, it is about choosing the right turntable for your needs but making sure you are getting a good-quality unit that you can trust with your vinyl records,

Article

Freebox Ultra Wi-Fi 7 router being defined as the cutting-edge for carrier-supplied customer-premises equipment for home networks

The Freebox Ultra’s First Test: Wi-Fi 7 Surpasses Expectations – GAMINGDEPUTY

French language / Langue française

Freebox Ultra : pourquoi elle est devenue rapidement une référence technique | Freenews.fr

Test de la Freebox Ultra : notre avis complet sur la box Internet de Free (frandroid.com)

My Comments

The competitive telecommunications and Internet market in France has led towards some exciting equipment being offered has led to the local telecommunications providers offering customer premises equipment way above the average for this class of equipment.

One firm I have given space to a lot on this site is Iliad who run their “Free” Internet service in France as something that raised the bar for value there. They ended up offering a highly capable piece of equipment in the form of the Freebox Révolution with a highly-capable router / NAS unit / DECT cordless-telephone base station in one Phillippe-Starck-designed box and a “décodeur” set-top box with Blu-Ray player in another similarly-designed box. It even ended up with features like “box-to-box” or “client-to-box” VPN support, software-defined Wi-Fi 5 support and a gyroscopic remote control and both devices benefited from continual firmware upgrades that offered new functionality.

Previously, the Freebox Révolution was defined as the cutting edge for this class of hardware

Now Iliad have taken things further with the Freebox Ultra which is usurping the role of the Freebox Révolution. This, like the Freebox Révolution uses fibre optic as the WAN connection but can work at 10 Gigabit speed, allowing for a competitive 10G Internet service courtesy of Free.

There is an extraordinary local network offering with a Wi-Fi 7 4-band access point with two streams for all of the bands. This media network is protected using the latest WPA3 security specification and there is the ability to steer client devices to the best band to work with. As for the wired network, this Freebox is about multi-gigabit Ethernet all the way with a 10 Gigabit SFP connection and four 2.5 Gigabit Ethernet sockets as a switch.

The CPU in this Freebox Ultra is an ARM Cortex A73 RISC CPU, something that wouldn’t look out of place in smartphones, tablets or the connected car. Here it is about using less power to handle a lot of data and offer a rich user interface. A user can install a NVM3 2280 SSD stick in to this router to have this work as a NAS the Freebox way with support for UPnP AV / DLNA, Apple Time Machine and other common standards. The other approach for connecting storage to this device is to use a USB-C socket with 60W PowerDelivery power for a USB hard disk or SSD of some sort.

Like the recent Freebox setups since the Révolution, this unit works on the Freebox OS which has a user interface that wouldn’t look out of place on a recent consumer or small-business network-attached storage device  or a desktop operating system’s GUI. Here, I wouldn’t put it past Free to add more functionality with a Freebox OS firmware update, even have it work with newer Wi-Fi or other network standards.

This device even comes with an extender known as the Freebox Répéteur 7 which works on Wi-Fi 7 to cover larger French homes like the “mas en Provence” so you can have continual Wi-Fi coverage through them. There is even an Ethernet connection so you could connect a wired Ethernet device to the extender or, perhaps, run a wired backhaul to the Ereebox 7.

Due to this connectivity and these capabilities, it bas been realised that the Freebox Ultra is about achieving a future-proof home network for your French home. This device is typically offered for EUR€49.99 per month with a fibre-optic broadband service that offers Internet, TV and fixed-line telephony of the kind expected in a French competitive telecommunications market.

Once you have the French telecommunications providers and AVM continually offering cutting-edge consumer-premises network equipment, it wouldn’t take long for these firms to compete with Silicon Valley and become an “Airbus” or “Arianespace” equivalent.

Article

Freebox Ultra Wi-Fi 7 router and extender available in France’s highly-competitive market

Best of Wi-Fi @MWC 2024 featuring Vantiva, ZTE, Qualcomm, & Intel – Wi-Fi NOW Global (wifinowglobal.com)

Previous Coverage about Wi-Fi 7

What is Wi-Fi 7 to provide for yoThur Wi-Fi wireless network?

My Comments

This year (2024) is being seen as a year for Wi-Fi 7 to gain legitimacy as a Wi-Fi network technology for the home and small-business network space. It is because the Wi-Fi 7 (802.11be) standard was set in stone on January 8 2024.

This will be about leading wireless networks towards multiple-gigabit networking, something that will be facilitated by Gigabit fibre Internet-service networks that can be easily upgraded to this direction. There is expected to be reduced latency which will benefit online-multiplayer video games, videoconferencing and similar time-sensitive activity. There will also be time-sensitive network support at the media level that will benefit multichannel sound, multi-camera video production, robotics and the like.

But these networks still work on a “best case” approach but in a way that permits Wi-Fi 7 networks to support equipment that works to prior standards.

What is now happening is that more telcos and ISPs are being offered home-network routers that support Wi-Fi 7 and offer these kind of advantages. This is something to be expected of in a competitive market like France where Free is offering the Freebox Ultra (Product Page – French language / Langue française) which is the first “n-box” router to work Wi-Fi 7. along with 4 2.5 Gigabit Ethernet ports.

ZTE’s Wi-Fi 7 router lineup

ZTE is coming forth with a range if Wi-Fi 7 routers and access points – a range of 10 models covering every possible configuration with some routers supporting FTTP setups and DSL-copper setups as well as broadband Internet, Then Vantiva demonstrated their EasyMesh-compatible Wi-Fi 7 extenders alongside their 5G fixed-wireless modem routers at Mobile World Congress 2024. Here, most of this equipment will be made available to telcos and ISPs who are offering Gigabit Fibre Internet services. As well, Netgear and TP-Link are offering a range of Wi-Fi 7 compatible routers, distributed Wi-Fi systems and access points in their home-network product ranges, typically for high-performance users.

There is still a trickle of client-side equipment with Samsung S24 Series smartphones and the Google Pixel 8 Pro smartphone being the first recognised smartphone model to support this technology. But this year, Wi-Fi 7 will become part of product refreshes for smartphones, tablets and laptops at the premium end of the market.

The fact that network equipment manufacturers are offering Wi-Fi 7 routers ‘under contract” to telcos and ISPs for sale or lease to their end-users and that the next generation of smartphones is to have Wi-Fi 7 shows industry confidence in that standard. It would still be a valid upgrade for networks running Wi-Fi 5 or prior-technology equipment especially if the equipment is significantly old. Or as the equipment comes in to affordable mid-range territory, it could be seen as a long-term upgrade for your Wi-Fi network.

As well, it could encourage the sale of multi-Gigabit Ethernet switches due to a need to have at least 2.5 Gigabit as a wired backhaul option for distributed or many-access-point Wi-Fi 7 networks with 2.5 Gigabit unmanaged basic 5-port switches coming in to very affordable territory.

Through this Website, I often talk of a “small logical network” when describing the kind of networks that connected devices can use when there is the desire to work with each other.

What is a “Small logical network”

This is a network typical of one set up in your home or small business as a primary network primarily by people who live in your home or work in your business. Here, the network is intended to be used by people who effectively know each other.

Basic DLNA Media Network – an example of what the small logical network is about

It can use Wi-Fi wireless technology; Ethernet new-wire technology; or a “wired no-new-wires” technology like HomePlug / G.Hn HomeGrid powerline, or MoCA / G.Hn HomeGrid TV coaxial cable; or a combination of these physical-connection technologies. But this network is connected to the same router / Internet-gateway device and established as one network.

The router device will use DHCP to allocate the IP addresses to each device from a particular pool of addresses so that they are discoverable across this network. It is also configured without any isolation across this network so that the users’ devices can discover each other across the network. This is important for file transfer across the network, printing (including driver-free printing) to network-connected printers, and AV / multimedia protocols and setups like network-based multiroom setups, AirPlay, Chromecast or UPnP AV / DLNA, with this concept being highlighted in the diagram opposite.

Guest Network Functionality

An increasing number of routers are supporting the creation of “guest networks” which are another logical network that may be used for tenants or guests. These networks have a different set of IP addresses and can’t discover the devices associated with the main network, although they can gain access to the Internet service.

These can either be set up to be another small logical network with device discovery within that network or as a public-access Wi-Fi network of the kind outlined below that doesn’t support device discovery across that network.

Public-access Wi-Fi

A properly configured public-access or community network is set up for device isolation so that the devices which use that network cannot discover each other but can discover the Internet connection. This is because such networks are used by people who don’t really know each other. Such networks wouldn’t fit in to that term of a “small logical network” that I use on this site because of the emphasis on device-to-device discoverability.

Newer hospitality networks

But tech vendors courting the hospitality and allied trades are working on network setups where each room or apartment of the facility has its own logical network. This is provided by a Wi-Fi network name (SSID) and password that is peculiar to the room or apartment and will last for the duration of your tenure. You will either have a docket with that Wi-Fi network name and password when you rent the room or even scan a EasyConnect QR code to enrol your device.

Then, when you enrol each of your devices to that network, they see each other as though they are a member of a home network. Some of these “solutions” vendors are even integrating devices like connected entertainment endpoints (Chromecasts, Apple TVs, smart TVs, Internet radios, etc) that work with these networks and are discoverable using the usual suspects (AirPlay, UPnP AV / DLNA, Chromecast, Spotify Connect, etc).

But this is distinct from a simple property-wide network like the headline Wi-Fi network that is pitched for use by guests that would be properly set up to isolate each device that uses the network. It is also distinct from the premise’s back-of-house network that is used for the hotel’s business IT needs.

Enterprise networks

Larger enterprise networks are typically engineered in a more intricate manner so that data flows within particular segments of that large organisation. This will typically be about the use of multiple virtual networks or multiple logical networks and even authentication routines not associated with the typical small network such as certificates.

Dependent on the use case, each logical network within an enterprise setup would be set up so that devices logged in to that network can find each other or they can be set up with the abovementioned device isolation.

Similarly, they will implement the Enterprise variations of the Wi-Fi WPA2/3 security protocols that use advanced sign-in requirements like usernames and passwords or device-local certificates. Most devices typically used on a home network wouldn’t support networks that use these kind of advanced security protocols.

Mobile networks

Mobile wireless network for two or more mobile devices and mobile client devices – uses a router-class device like a “Mi-Fi” router

A small logical network can be created in a mobile environment through the use of a travel router or MiFi-type mobile broadband modem router. Some mobile NAS units also provide this kind of facility. Even a regular computer running recent versions of MacOS or Windows can create its own small logical network while connecting to a public-access Wi-Fi network thanks to “mobile hotspot” or “Internet Sharing” functionality.

Here, the Wi-Fi network that these devices create is essentially a small logical network as if it is acting as a home-network Wi-Fi router. This is typically used to connect a Chromecast, Apple TV or similar network-based multimedia device to your hotel’s Wi-Fi guest-access network in order for you to stream multimedia to that device.

Conclusion

The idea behind the small logical network is a network, independent of connection media, that exists behind a single router device and allows each device on that network to discover and connect to each other.

What is independent install

As more fibre-to-the-premises connections become ubiquitous, there will be a call towards independent-install as a service provisioning option in order to save costs for subsequent FTTP deployments

Independent installation of fibre-to-the-home / fibre-to-the-premises broadband Internet is where the installation and provisioning of this service doesn’t require a technician employed or contracted by the infrastructure provider or ISP to come to your premises.

Most likely these kind of FTTH / FTTP installations will take place in an environment where the consumer owns the optical network terminal and can replace it with equipment that suits their needs better. As well, such equipment will be typically in the form of desktop equipment that is the size of a typical home-network router.

Independent install approaches have been seen to be successful with ADSL and cable broadband Internet due to the copper infrastructure being ubiquitous in most households. In a lot of cases, this has allowed ISPs and telcos to offer cheaper broadband Internet to the masses.

New connections

A new connection to a premises that hasn’t been previously connected would require a technician employed or contracted by the infrastructure provider or ISP to run a connection from the street to the building or premises. They would be required to install a “demarcation point” on the premises where the infrastructure provider’s legal responsibility ends as far as the infrastructure goes.

Some ISPs or infrastructure providers may supply and install the fibre-optic cabling from the demarcation point to a wall socket close to where you are to have your optical network terminal and home-network router. Here, this would be part of the installation cost for a new connection to an existing premises.

On the other hand, an independent third-party installer with fibre-optic skills would install fibre-optic runs as part of electrical / AV / data cabling during the construction of a new building or full-on renovation. This would be paid for by the building owner as part of the project costs.

As well, there will be pressure on building developers to install the necessary infrastructure for fibre-to-the-premises Internet as a standard offering. This will be exerted by customers, urban planners, regulatory authorities, competing developers and the like to have that project set up for today’s online expectations. In this case, electricians engaged by the developers will be required to be skilled in FTTP fibre-optic installations.

Existing connections

The AVM Fritz!Box 5530 is one of these home-network routers with a connection for fibre-optic internet in the form of an SFP plug.

As fibre-to-the-premises broadband takes hold, there will be more of the existing connections to this kind of infrastructure. This will be where independent install will earn its keep. It will also include premises that are part of a previously-mentioned building development that have been wired for fibre-to-the-premises.

Self-install, including wires-only / BYO setups

Self-install is where there is cabling to the premises and a wall socket installed therein. The customer picks up the equipment they need and, perhaps, a flylead or adaptor from the ISP’s bricks-and-mortar presence or a retailer. Or this equipment is delivered to the customer’s premises by post or courier.

Then the customer unpacks the equipment and installs it themselves. They may find that the ISP or infrastructure provider has to remotely activate the equipment and set it up for the Internet service.

If the arrangement is described as a BYO or wires-only setup, the equipment isn’t bundled with the service. Rather the customer buys the equipment from the ISP or infrastructure provider or a technology retailer. They can take the equipment between premises rather than leaving it behind when they move.

The BYO or wires-only setup would be pushed for in the name of competition and innovation. This is due to the idea of offering higher-performance ONT modems or ONT/router combo equipment a.k.a. fibre-optic gateways that is equivalent to modem routers. As well, it would be pushed as a lower-cost service-provisioning option due to the ISP or telco not needing to have customer-premises equipment on their books as a rapidly-depreciating asset including the cost to warehouse the equipment, nor needing to have technicians drive to the customer’s premises to deliver or install the equipment.

Should the equipment fail, the customer would have to disconnect the equipment and organise to have it repaired. Here, they would send the equipment to the ISP or infrastructure provider if it is bundled with the service. Or they would send it to a repairer if the equipment isn’t bundled, such as a BYO equipment deal. The same situation also applies where a technical upgrade is taking place and the customer needs to use newer equipment.

Similarly, self-install especially BYO / wires-only setup may permit a customer to take the equipment with them when they move to premises where there is already the FTTP infrastructure therein. This would appeal with people who purchase ONT modems or ONT/router units that are about higher performance.

Independent technician install

An independent-technician install relies on a suitably-trained technician engaged by the customer to install the fibre-optic wiring between the demarcation point and where they want to install their equipment.

Such technicians would be able to move the fibre-optic connection on the customer’s side of the demarcation point if you had to reposition it to a newer location. The technician would also be able to do repairs on the fibre-optic cabling if it failed or was damaged.

If you are renovating your home or working on a new-build premises, having an electrician or AV technician who is skilled with fibre-optic handling will come in to its own. Here, you have the same tradesperson doing the fibre-optic cabling as well as other copper-based cabling runs, whether AC wiring, RF for a TV aerial or master-antenna TV setup, AV for multiroom audio and video or Ethernet cabling for your home network.

What is needed

Demarcation point

The fibre-to-the-premises installation has to have a distinct demarcation point at the user’s premises. This delineates the point of responsibility between the service/infrastructure provider and the premises owner/occupier as far as the fibre-optic infrastructure is concerned.

This would have to designed so that a skilled independent technician can connect a fibre-optic installation to this point when they have installed it. It could be feasible to have this support a “multi-fibre” connection with a “mutual / independent / open” demarcation point for environments that support infrastructure-level competition, something that is already established in France. That is where multiple street-side fibre connections are connected to this point and a technician engaged by the service provider the user is contracting with switches the user to that infrastructure.

Of course a consumer may want wall points for two or more infrastructure-level fibre connections. This would be called upon by businesses, for example, who subscribe to service providers on different infrastructures for increased fault tolerance of their Internet connection. In these cases, there would be two or more of the demarcation points on the premises in addition to two or more wall points or one multi-fibre demarcation point is used to serve two different outlets with connections to different infrastructure providers.

Multiple-premises buildings like apartment blocks or shopping centres may have the demarcation point in the telecommunications equipment room, typically in the basement or on the ground floor. This may be held as the building demarcation point while the cabling is maintained by technicians appointed by the building committee or owner. Some setups may then require a second demarcation point per premises with this being installed in a cupboard therein. In that area, cabling to the wall socket may be serviced by a technician engaged by the premises owner or occupier.

To assure access to infrastructure-level competition, there may be the idea of having multi-fibre connectivity to each premises with the premises-level demarcation point being where a household is switched between competing infrastructure providers.

Wall point

As well, there would be a requirement to have a fibre-optic wall point so that customers can easily connect and disconnect their optical network terminal. This would make self-install or “BYO device” arrangements work properly because the customer would have to be able to easily connect equipment that they supply.

Such wall points would be required to be installed where the customer wants their equipment placed. There will be instances where a customer wants two or more wall points that are connected to different fibre-optic infrastructure providers so as to provide a fault-tolerant setup.

Rugged flylead with rugged plugs

Then there would be the need for a rugged flylead with rugged plugs that the customer uses to connect between an optical network terminal (fibre optic modem) and the wall point.

Such cables and plugs would be about being able to be connected and disconnected easily by anyone and not being at risk of damage. It may also be about having these cables offered at lengths that suit the customer’s needs. These would be supplied through retail outlets, packaged with the ONT equipment or supplied by the installer. Most likely this will be in the form of the Single Form Pluggable connection on the equipment side like with the AVM Fritz!Box 5530 advanced home network router.

Why independent install

Having independent install as part of a fibre-to-the-premises setup for home and small-business users would become an economical measure for infrastructure providers. This makes a lot of sense with existing installations where a premises has FTTH / FTTP cabling to the point where a user wants to set up their network equipment.

Here, a technician doesn’t need to come out, supply and install an ONT modem in the premises; avoiding the need for the customer to book an appointment and make sure a responsible adult is waiting around to welcome and supervise the installer.

It would also permit the customer to choose their own kind of FTTP optical-network-terminal equipment. This is more so where the ONT equipment is part of a router and there is the desire to offer innovative better-performing equipment that has functionality that is desired by the customer. As well, manufacturers are encouraged to design smaller desktop units that fit in with the customer’s premises.

This also applies to installation modifications where a customer engages a trained technician to do the job. For example, the customer could engage an electrician who has been trained for AV, telecommunications and other similar work to do any “customer-side” work like moving their equipment or even to wire up a new building or premises.

The role of the infrastructure-supplier’s technicians would be reduced so as to “pull” the fibre-optic cabling from the street to the network demarcation point on the building and maintain that connection. As well, in an environment where there is competing infrastructure providers, the technicians supplied by the competing provider can know where to connect in their cabling to the building’s cabling infrastructure.

The disadvantage associated with independent install for FTTH setups is that the infrastructure provider would lose quality control over the installation. This may not necessarily apply to a self-install arrangement where the goal is to connect customer-supplied equipment to existing connections. But it would apply where new fibre-optic cabling is installed or an existing fibre-optic cabling installation is modified by a third-party technician.

Conclusion

As more countries take on fibre-to-the-premises broadband Internet, there will be the question about making sure that independent installation options are part of the course. This is more so as more premises become wired up to FTTP and the prospect of self-install where customers install replacement or improved equipment themselves becomes appealing as a way for operators to save money.

Article

Marantz’s new streaming CD player and stereo amplifier are TV and turntable-friendly | What Hi-Fi? (whathifi.com)

From the horse’s mouth

Marantz

CD-50n Network CD player (Product Page)

My Comments

The last decade has seen the traditional vinyl record gaining a revival as a preferred physical medium to collect recorded music on. But the CD, which has just turned 40 this year, has been simmering along as a collectable music format over this same period and is gaining a similar kind of recognition and acceptability to vinyl.

Some of us still use CD as our preferred physical music medium due to it being cheap on the new or secondhand market or easy to have in a mobile or portable form such as through ripping to hard disk and syncing to our smartphones. As well, the small size of these discs appeals to those of us who want to build or maintain large collections without it taking up much space. Even the record labels have exploited this further by justifying CD as a medium to offer collectable album editions that hold more musical content than the standard album editions, perhaps due to a disc holding extra material or multi-disc compilations stored in a case that is the same size as the standard CD jewel case.

Are we still playing CDs nowadays

This has been more so due to CDs being a cheaper format to replicate and sell than vinyl although able to yield a very-high-quality sound. As well, more of the premium hi-fi brands of respect are giving CD as much developmental and promotional space as vinyl, with this manifesting in component-type CD players that you connect to your hi-fi system appearing in more audio product lineups. Even Yamaha has reintroduced the 5-disc CD changer where all the discs are loaded on to a carousel that is part of a large drawer, in the form of the CD-C603 changer. As well, some consumer-electronics manufacturers are still persisting with CD receivers or stereo systems that play CDs with the former being a component that has radio, CD and, perhaps, network / Internet audio sources which you just connect to a set of speakers of your choice.

I have covered on this site some of the “network CD players” that Yamaha, Marantz and Technics have launched over the years. These combine a CD player and a network-audio streamer in one box, only requiring you to use one input on your amplifier or receiver to play CDs or content held on online sources or your home network.

Marantz have solidified  their position in the network-CD-player space in two ways. Firstly they have released a network SACD player in the form of the SACD-30n with similar features but omitting the HDMI ARC connection. But this time they have released the CD-50n network CD player which follows on from the ND-8006 network CD player that I covered previously.

The Marantz  CD-50n is a CD player with the expectations of a current premium full-width component-type CD player. This includes a mechanism and signal path that is engineered for high-quality CD reproduction and the same kind of advanced CD play functions associated with that format for a long time.

This unit even underscores the “single input on the amplifier” advantage associated with network CD players further by being equipped with an HDMI-ARC connection for TV audio. Here, you would connect the Marantz CD-50n to your TV’s HDMI-ARC connection so you can have the TV’s sound play through your hi-fi system.

Of course, there are the coaxial and optical SP/DIF inputs and outputs that make this unit work as a digital-analogue converter for TVs, MiniDisc decks or other digital-audio equipment; or pass the sound in a digital-audio manner to a digital amplifier or DAC. You can use this network CD player to stream audio content from smartphones and similar Bluetooth-capable devices through it to the connected sound system.

The Marantz CD-50n works as a sound card for computers that are connected to it via USB but some Windows computers will need to run a Marantz-supplied driver to work properly with it. As well, there is a USB Type-A connection for a Mass-Storage device that is full of music held in the common audio file formats.

As mentioned previously, this Marantz network CD player can connect to a digital amplifier or DAC via an SP/DIF optical or coaxial connection. There are two line-level outputs, represented as two sets of RCA sockets on the back. One of these is a fixed-level output typically used with most stereo systems where you have an amplifier that you regulate the sound level with while the other is a variable-level output that can he used with a power amplifier or active speakers. This also comes in to its own in other use cases where you expect the Marantz unit and its remote to be the point of control for the sound level.

There is a built-in headphone amplifier so you can connect a pair of wired headphones to the Marantz CD-50n. But it can serve as a Bluetooth source device where you use a pair of Bluetooth headphones or a Bluetooth speaker as the audio output device. In this case, you have to use the Bluetooth device’s volume control to adjust the sound volume to your tastes. The Bluetooth functionality for both source and target device roles works according to the Bluetooth Classic specification.

As far as your home network is concerned, you can connected to it via Ethernet or Wi-Fi. This leads you to it being part of the DLNA Home Media Network where you can play content held on a media server or NAS. Or through the Denon/Marantz HEOS platform, you can stream a variety of online services like Spotify, Deezer or Tidal, managing them from your smartphone with the HEOS app. For Internet radio, the HEOS platform has support for the TuneIn Internet radio platform so you can listen to a wide range of radio stations including from overseas through the Marantz CD-50n.

Being part of the Denon/Marantz HEOS ecosystem also means that the Marantz CD-50n can work as part of a network multiroom system using other HEOS-capable wireless speakers or hi-fi / AV components made by brands in the Denon-Marantz group. As well, it can be part of the Apple AirPlay 2 or Roon network-audio ecosystems, especially the latter which is seen as the “audiophile network multiroom audio” standard.

If you have a recent Marantz amplifier with the appropriate connections, the CD-50n can be connected using Marantz’s proprietary inter-component control arrangement. This will open up the possibility of single-remote-control operation, one-touch start-up and one-touch shut-down operation.

This player costs AUD$3200 in Australia, but you have a highly-strung CD player and network-audio streamer in one box which may seem to justify the price when you are in to premium hi-fi. Personally, I would like to see more hi-fi companies keep at least one of these network CD players in their product range for those of us who want that single-box solution to a digital audio source in our audio systems.

Articles

The Apple messaging app on your iPhone will support RCS messaging as a fallback platform in 2024

Apple announces RCS support for iOS. What does this mean for green vs. blue bubbles? | Mashable

Messaging Between iPhones and Android to Get So Much Better Next Year (droid-life.com)

Apple iPhones will support RCS starting 2024 but green bubbles will remain – SamMobile

My Comments

RCS Universal Profile messaging is a rich open-frame messaging standard defined by GSM Association that follows on from SMS and MMS messaging. This allows for IP-based text messaging and offers features typically associated with over-the-top messaging platforms like WhatsApp, Facebook Messenger, Signal or Apple’s iMessage. But it allows mobile-phone service providers to offer these kind of features.

Android has provided inherent support for this messaging system as part of Google’s and Samsung’s messaging clients. But Apple was determined to use their own iMessage platform as the preferred messaging platform for iPhones or iPads. If you as an Android user communicated with someone who uses an iPhone, your messages would go through as an MMS message.

This wouldn’t have the rich messaging abilities of either RCS or iMessage and your messages come through as green bubbles in the conversation flow. Photos and videos would also appear at lower resolutions which may not do them justice. In some cases, people who want to engage in rich messaging with Apple users would end up resorting to WhatsApp, Signal or a similar platform.

Sometimes Apple fanbois see the green bubble as an indication that their correspondent is “not in the program” because they aren’t using an iPhone, with some tech and general press describing the green bubble as a “scarlet letter”. Recently Google and Samsung have been putting pressure on Apple to implement RCS messaging in iMessage including shaming Apple in front of industry peers. This is similar to how Apple products, especially iPhones, have been seen as status symbols.

As well, the European Union enacted their Digital Markets Act which is seen as a way to significantly regulate Big Tech and their market power. There was further interest amongst the tech press about having the European Commission use this law to enforce Apple to implement RCS messaging on iPhones and iPads. This is after the success that the European bureaucrats had with forcing Apple to install USB-C power-data connectors on the iPhone 15 in lieu of Apple’s preferred MFi Lightning connectors, with this connection appearing on the iPhone 15 family and newer iPhones offered around the world.

The RCS messaging feature will work as a fallback cross-platform messaging platform for sending messages to non-Apple devices. This is while the Apple iMessage platform continues to exist as the preferred messaging platform amongst Apple’s own platforms. That will still mean that Apple users appear in a conversation stream as blue bubbles while other platforms appear as green bubbles.

This feature will be expected to start sometime in 2024 and most likely be issued as part of a new major version or “point” update for iOS where functionality is introduced to the operating system, rather than a software-quality / security update.