The software on those customer-facing iPads–your mobile device can run it

Article

5 Things To Know About That In-Room Hotel iPad || HotelChatter

From the horse’s mouth

Intelity (software developer of these apps)

Company Web page

My Comments

An increasing number of hotels are providing guests with an iPad or similar “mobile-platform” tablet in your room for you to use. These typically are running a custom-designed app that works as an information source for the guest and, in some cases, provides self-service access to a wide range of services like in-room dining, housekeeping requests and check-out.

These devices are the same hardware as the iPad that you have, and this customer-service software is most likely to be available at the iTunes App Store for your iOS device or Google Play for your Android device. In some cases, the software may also be finished as an HTML5 Web app for use on laptops running the latest Web browser or on mobile devices that don’t have a native version written for them.

By you running this kind of customer-facing software on your device, you have access to the same benefits as you would have on the device that is located at the property. This can benefit you if you end up being enamoured by the hotel you are staying at and can allow you to take it further. For example, you could use the “local knowledge” functionality when you are out and about or even to plan your visit to the same town again; or refer to “in-room dining” menus for suggesting menu options that you have liked.

These kind of customer-facing apps can benefit customers who want to take the experience with your product or service further. This is in a similar way to the concept of the “app-cessory” where there are mobile-platform apps that enhance the functionality of a device or provide an improved user interface for the device or the apps that extend sports events or TV shows by adding value to them.

What I would like to see of these apps is that developers write native apps for the common mobile platforms while writing Web apps for use with unsupported platforms.

Short-range DSL now moves to Gigabit speeds

Article

thinkbroadband :: Say hello to new 1Gbps ITU G.9700 standard

My Comments

Just lately, the phone-line-based DSL standard has been extended to the Gigabit class courtesy of the new ITU G.9700 standard. It will take a significant amount of time before the necessary hardware is released in to the market, whether as professional-install hardware or self-install hardware.

It is primarily a way to keep the phone-line-based DSL technology alive and relevant even though the fibre-to-the-premises deployments like what is being pushed in France, Australia under a Labour government or some US cities by Google is being considered the status quo.

On the other hand, it is being pitched as a faster alternative to the short-range VDSL2 deployments that are being used in “fibre-to-the-building” or some “fibre-to-the-cabinet” setups. In the UK, they see a situation where the fibre-copper transfer point could be serving a small group of premises whether it be a street or a block of flats. On the other hand, they also suggested the technology for older buildings where it could be harder and prohibitively expensive to run optical fibre in these buildings for a fibre-to-the-premises setup.

At the moment, like with other DSL technologies, this will initially require different splitters which could make a requirement for professional “truck-roll-based” installation for these setups rather than the cheaper “self-install” kits commonly used with ADSL setups.

It will be interesting to see how this will affect the concept of deploying next-generation broadband in different areas, whether they are the target of a fibre-copper or full-fibre setup.

Australian Tax Office heads to open commerce standards

Article

ATO goes after open commerce standards – News – iTnews Mobile Edition

My Comments

Previously, when I covered the news that the Australian Tax Office will turn out a Macintosh port of their eTax electronic tax-return lodgement program, I raised the issue of them moving to an “open-frame” approach for taxation-information management.

Now they have implemented the “Standard Business Reporting” program which has a goal to move tax and superannuation information exchange to the eMMS 3.0 information-exchange standard commonly used by other Australian industries and overseas.

This opens the door for software developers to write SBR-compliant tax / superannuation-contribution preparation software that provides proper data to the Tax Office. One area I would see this facilitating would be the ability for accounting software to support tax preparation either “out of the box” or as an additional module.

The main goal for this has been the management of superannuation contributions where the ATO wants to have businesses with more than 20 staff to move to this standard platform for this purpose. This allows for data that isn’t riddled with errors.

Personally, I would see this also being able to make things easier for people who do business overseas, whether being expats who move to or from this country or those of us who sell goods or services overseas via the Internet. This is more so as the Great Financial Crisis has caused a call for proper management of taxation across borders.

Adaptive All-In-One Computers–Where do I see them fit in?

 

Sony VAIO Tap 20 adaptive all-in-one computer as a desktop

Sony VAIO Tap 20 – an example of an “adaptive all-in-one” computer

As I have covered in this Website before, there is a new class of computer that is bridging the gap between the clamshell laptop and the all-in-one desktop. These are known as the “Adaptive All-In-One” computers but are also called “desktop tablets” or “mobile all-in-one” computers.

What are these computers?

This class of computer is  an 18”-21” tablet computer that has “regular computer” credentials such as using computing horsepower typically used in a desktop or laptop computer rather than what would be used in a tablet like the Apple iPad. They are able to be set up as a tablet which is primarily touch operated or, through the use of a kickstand integrated in the tablet and a wireless keyboard and mouse, or a detachable pedestal which has a keyboard and mouse connected to it, they can he used as a conventional all-in-one desktop computer.

As for software, they can run on “regular-computer” operating systems like Windows 8 or a desktop Linux distribution. Users can then run the applications and games that they are able to run on a regular computer. This is being augmented through the Windows Store which is filling up with many applications and games that take advantage of the touchscreen.

The best example of this class of computer and one I have reviewed on HomeNetworking01.info is the Sony VAIO Tap 20. But other manufacturers are showing up with similar computers like the Dell XPS 18 and the HP Envy Rove 20 which is on the verge of being released as I write this article.

Where do these computers belong in the computing market?

Typically they are positioned between a 17” desktop-replacement laptop computer and a 21” all-in-one desktop or a low-profile desktop that works with a 21” screen. They also are pitched to stand between a convertible laptop or large tablet and a touchscreen-capable laptop, desktop or all-in-one when it comes to touch computing. So they end up being marketed as a hybrid class of computer which stands between a tablet, laptop or desktop form factor.

How will they benefit users in the home or small-business

I primarily see these computers fulfilling the demands of a transportable lifestyle computer. Here, it would be seen as a highly-capable large-screen alternative to a 10” tablet like an iPad or Android tablet.

One application would be large-area reading and viewing. This would range from surfing the Web through browsing email, Facebook or Twitter to reading electronic-newspaper apps or watching catch-up TV in your favourite armchair or couch. It would also underscore “second-screen” functionality while watching TV, such as use of scoreboard apps during sportscasts, engaging in online voting or using IMDB or Wikipedia to check a fact relating to what you are watching (to settle that argument).

Sony VAIO Tap 20 adaptive all-in-one computer right-hand-side connections - distinctive U-shaped kickstand that doubles as a carrying handle

The U-shaped kickstand on the Sony VAIO Tap 20 doubles as a carrying handle


In the kitchen, the integrated kickstand that most of these computers have would make them highly relevant for referring to online recipes while cooking. This avoids the need to rest the computer precariously on that bowl of fruit and fearing an accident would happen or the touchscreen would be covered with flour.

Of course, two or more people could comfortably pore over the same information such as an email, Facebook News Feed or photo album. Some of these units like the upcoming HP Envy Rove 20 have a manual switch which spins the display 90 degrees to allow another person to see the screen without you having to swivel the computer.

Another highly-promoted activity is group gaming. This will come in to play with computer-based “takes” of the classic board, card and casino games where these games will allow two or more human players to play on the one machine. In some cases, the machine may be able to play as one or more of the players, and / or simply represent one or more online players while preserving the rules of the game and, where applicable, rolling dice or shuffling a deck of cards.

Of course, some games like “old-school” arcade games, pinball games and strategy games will gain a level of freshness when you play them on these computers. For example, a person who grew up in the 80s may find that playing a Windows 8 version of PacMan or Galaga may remind them of playing the game on one of those “table-style” arcade games that were popular then; or a game like Civilization V takes so well to you literally moving the characters or teams over the large playfield created on the large screen.

In the small business, the “Adaptive All-In-One” could become useful in the customer-service space. Here, you could have point-of-sale terminals or similar terminals that use the increased space to show more items or options for the sales assistant to use while completing the sale.

These computers could also come in to their own when showing information to colleagues, partners or clients, whether it be certain cells of interest in a spreadsheet or a PDF file or a presentation that you can easily flick through to get to the salient parts.

The main feature that I have noticed with this class of computer when I reviewed the Sony VAIO Tap 20 was that fact that they offer the balance between a desktop-replacement laptop that you can easily take around the house or put away when not needed and a desktop, especially an all-in-one desktop, that has the large screen area. This is made much easier with those “adaptive all-in-one” computers that use U-shaped metal kickstands like what the VAIO Tap 20 is equipped with. Here, these kickstand can easily double as a carrying handle for the computer in the same manner as the carrying handle integrated in to a boombox, portable TV set or small sewing machine.

Who would buy these computers?

These could be bought by most people as  an alternative to a laptop that is used primarily at the home and taken out and about on rare occasions. It is more so when the user values a large screen while valuing an easily-portable computer.

The memory and hard disk capacities would show up the Adaptive All-In-One computers as being credible for a sole computer or primary-use computer for most people rather than the secondary computer.that you may think of typically.with this device class.

My recommendations about buying these computers

If you do buy an “Adaptive All-In-One” computer, I would recommend that you purchase an accessory optical drive if you expect the computer to be your “sole” computer. This will be of importance if you still like to share data on the low-cost optical disks or buy music and video content on optical disks.

Some of the optical drives may be available as an “expansion module” / docking-station accessory with Ethernet connectivity, extra USB ports, a sound module and other functions. Here this can come in handy if you think of using extra peripherals with your Adaptive All-In-One computer.

Conclusion

The Adaptive All-In-One computer will definitely show up as a computer type that will please a lot of users who want something to fill the gap between a transportable regular computer and a large screen. It doesn’t matter whether you use these computers as your main or sole computer or as an additional computer and will earn their keep as a “lifestyle” computer.

HP announces an answer to the Sony VAIO Tap 20 computer

Article

HP Reveals ENVY Rove20 Specs; Available Sunday

From the horse’s mouth

HP

Envy Rove 20 Product Page

“The Next Bench” blog post

My Comments

Just a short while ago, I had reviewed the Sony VAIO Tap 20 “adaptive all-in-one” computer which is a large 20” tablet that runs Windows 8. But it can be purposed as a desktop computer by folding out a kickstand and using a wireless keyboard and mouse for text entry and finer navigation.

As well, Dell had fielded an 18” tablet computer with a similar design. Now HP who have become the behemoth on the consumer and small-business computing space have answered Sony by releasing the Envy Rove 20 which is of a similar design.

Here, the Envy Rove 20 has some gaming credentials with the implementation of 10-point highly-responsive touchscreen behaviour. It also implements “Beats Audio” sound-reproduction tuning like a lot of their Envy portable-computer collection and some of the Pavilion portable-computer collection.

It is driven by the Intel “Haswell” i3 processor and has 4Gb RAM under the hood. As well, it has 1Tb capacity on its solid-state hard disk which is twice that if the Tap 20 and also implements 3 USB 3.0 connections with one able to charge a portable device when the computer is in sleep mode. As for the Wi-Fi network, the Envy Rove 20 has native support for wireless segments that work on the 802.11ac draft standard as well as the 802.11n standard for both 2.4GHz and 5GHz.

As expected for this class of computer, it would be able to run for 3 hours on its own battery and also implements a manual rotate button so you can show others who are poring over the computer from the other side of the bench the image that is on the display.

But what I see of this, along with Intel defining the “Adaptive All-In-One” name for this class of computers is that the playing filed will become very full. What we would have to see is the Windows Store becoming full of quality software that exploits what these computers are all about. This could include the ability to make best use of the large display and the touchscreen user interface such as through semantic zooming and making use of the “pinch-to-zoom” gesture.

For games, some of the online board games that have been written for the iOS and Android platforms and have performed well on the tablet devices based on these platforms could be ported to Windows 8 and made to exploit the abilities of these computers.

I would personally see these “Adaptive All-In-One” computers as something to look forward to as an easily-transportable “lifestyle” computer device.

A Yamaha CD player that adds network capability to existing hi-fi systems

Articles – From the horse’s mouth

Yamaha

Introducing a new concept in Hi Fi – Yamaha – Australia (Press release)

CD-N500 Product Page

My Comments

You may have your favourite hi-fi equipment no matter how old it is but you would like to replace that half-dead CD player, upgrade to a better CD player or simply add CD playback to the existing music system. But you would also like to gain access to audio content held on your home network and tune in to the “new short-wave” that is Internet radio through that hi-fi setup. Adding a CD player and a network media adaptor may result in two extra boxes and your may find that you don’t have enough line-level inputs on the amplifier for the exercise and this may require you to purchase a switch box.

Yamaha have released the CD-N500 which is a “full-width” component CD player that doubles as a network media receiver. This unit plugs in to any vacant digital input or analogue line-level input on an existing sound system to provide it with both the CD playback and network-audio-access functions.

It can connect to a home network only via an Ethernet connection, which would work properly with a house that is wired for Ethernet or with a HomePlug AV segment once you use the appropriate “homeplug” adaptor. These connections then allow for reliable media-streaming operation and is what I would prefer for equipment that is normally in a permanent location and plugged in to AC power.

As well, you can connect iOS devices, USB memory keys or MP3 players that present themselves as Mass-Storage Devices to the USB socket on the front panel. Here, whenever you play audio content from the iOS devices like the iPod Classic that is stuffed to the gunnels with music, the sound is passed along digitally and you can use the CD-N500’s remote control as the control surface for the iOS device.

The Yamaha CD player has access to DLNA-compliant network media servers and can be controlled from computers and other devices using AirPlay and DLNA compliant setups. But Yamaha also has a media-controller app for this CD player which allows your smartphone or tablet to be the player’s control surface while exploiting the portable device’s larger display. Of course you can control this player using controls on its front panel or supplied remote control but would have to contend with a single-line display.

It can work with the FLAC high-quality audio files as well as the regular CD-quality MP3 / WMA / AAC files. As for Internet radio, this is facilitated with the vTuner Internet-radio directory which most Internet radios and similar equipment use. Even the digital-analogue conversion circuitry and analogue signal path is optimised for best quality sound while you can connect this player to an external digital-analogue converter or a digital amplifier if these devices offer better sound quality.

At the moment, this unit doesn’t yet support Spotify, Pandora, Last.fm or other popular online music services but Yamaha could add this functionality through subsequent firmware updates.

But what I like more about this player is that, like the CD/MiniDisc decks released by Sony, Sharp, JVC and Marantz through MiniDisc’s heyday, this unit is a one-box setup that can complement existing hi-fi setups rather than unnecessarily replacing components in these setups. It underscores the fact that there are ways of heading to the online era without leaving the past behind.

What has happened about the faulty firmware issue for the PS3

Article

Sony releases PS3 firmware update to fix last week’s fiasco | Tech Culture – CNET News

Instructions – From the horse’s mouth

Sony PlayStation

Manually updating your PS3 with the firmware

Safe Mode on PS3

My Comments

Sony PS3 games console

Sony PS3 games console – latest firmware should be 4.46

Previously, when Sony rolled out version 4.45 of the PlayStation 3 operating software, this update had caused many PS3s not to boot properly for interactive use. The situation had been described where the consoles were effectively “bricked” and Sony had to immediately pull the update from their PS3 software-update servers.

Now they have released version 4.46 of this firmware and made it available also as a manual-update file so you can recover a PS3 that had suffered this fate. When this situation had occurred with the PS3, the version-4.45 software went in to an “endless-loop” during startup thus not reaching the standard “XMB” start menu.

Fortunately, Sony had set up a “safe mode” for the PS3 in a similar way to what Microsoft, Apple and others have offered as a diagnostic startup option for their regular-computer operating systems. Here, this places the equipment in a known state with minimum software and hardware overhead that allows one to perform diagnostic or recovery work on faulty equipment.

In this case, you can load the firmware from a USB memory key and Sony have provided instructions on how to go about this, such as which folder to position the firmware file on the USB memory key. Here, you would need to use your desktop or laptop computer to download the firmware file to the USB memory key in the known location (\PS3\UPDATE).

Here they also detailed how to place the PS3 in to the aforementioned “safe mode” so you can load the firmware from the USB memory key. As well, you would have to connect the game controller to the PS3 via a USB cable while it is in this mode and be sure to select the “System Update” option on the menu that pops up to start this update without destroying your data and settings.

As well, I would suggest that you check that the version of the firmware on your PS3 is indeed 4.46 or newer in order to make sure that your console is behaving in a reliable manner.

An issue that could be raised regarding field-updatable firmware especially for consumer-electronics devices is providing a fail-safe update process with a rollback mechanism. This is more of an issue when there are situations like bugs that missed the quality-control process; failed download / install processes or, at worst, malware written in to field-updated firmware.

Here, the previous firmware could be kept in a separate section of flash memory or secondary storage, as well as the ability for the device to start in to safe mode thus providing the option for software rollback if the software didn’t start to the normal user interface.  Similarly, the standard user interface could be used as a way to facilitate this kind of software rollback, which can come in handy with bugs that creep up during normal operation. This is similar to what has been achieved with most desktop operating systems like Microsoft Windows, where the operating system creates “system restore points” at the start of software install or update processes and is able to roll back to these points if the install or update becomes dysfunctional.

What we are starting to see is that devices like games consoles, smart TVs and printers are becoming as sophisticated as regular computers and entering a point where the same kind of irregularities could creep up on them.

The Freebox Révolution benefits from Freebox OS to be like a recent NAS

Articles – French language

La Freebox Révolution accueille Freebox OS – DegroupNews.com

Mise à jour Free : capacités de partage renforcées | 59Hardware.net

My Comments

Just lately, Free had rolled out their latest firmware update for the Freebox Révolution “n-box” router. This has various improvements like cloud-assisted remote management and storage access, including management of the “FreePlug” HomePlug AV power-supply units for these devices.

But they describe this firmware not as firmware for customer-premises equipment but as “Freebox OS”. This is like placing the Freebox Révolution on the same stage as one of the recent consumer or small-business network-attached storage devices. Here, they lay out the management dashboard for this device so it reminds you of a desktop operating system’s GUI, This is carried over whether you use it from a Web browser or the freely-downloaded iOS or Android mobile apps.

They also are publishing an application-programming interface so that third-party software developers could create management programs for the Freebox Révolution. This could allow for things like management software which works native to particular host-device operating environments through improved dashboard software.

But who knows what is in store for this device once the groundwork is laid down in this operating system. For example Free could start curating an app store and software-development environment for the Freebox Révolution so that others could add functionality to this device. Think of such options as access to third-party cloud storage, additional application-level gateway functionality and, perhaps, adding business-grade features like VPN-endpoint or VoIP “virtual extension” abilities to a consumer-grade device.

It is another example of the lengths the French telecommunications companies are going to to yield multi-play Internet services that are facilitated with highly-capable equipment.

A wireless-broadband router for the boat

Pleasure-boats at a marina in MelbourneArticle – From the horse’s mouth

Netcomm

NTC-30WV-02 – Marine WiFi Router : NetComm Wireless (Product Page)

My Comments

You have that narrowboat, houseboat or large cabin cruiser that has effectively become your home away from home. In some cases, you may be spending a lot of your retirement years on this boat. But what about your Internet connection?

Netcomm have answered this need with their NTC-30WV-02 which is a “Mi-Fi” router that is optimised for the marine life in freshwater and saltwater. It works with most 3G wireless broadband services which will cover most inland freshwater and 60km off the Australian coast. That figure may be accurate for the East of Australia and similar coastlines that have many towns and cities and use the 800Mhz and 950Mbz spectrum for 3G wireless broadband.

For the LAN side of the equation, it uses 802.11n dual-stream MIMO for the Wi-Fi segment and 10/100BaseT Ethernet as its wired segment. This is being pitched not just for smartphones, tablets and laptops but also for network-capable navigation devices that will start to exist on the bridge of many pleasure craft.

Both sides of the equation are serviced by proper user-replaceable dipole aerials (antennas) which have a greater chance of yielding better 3G and Wi-Fi performance than the typical “Mi-Fi” router with its integrated aerials. It also could mean that a boatie could install stronger 3G aerials on this 3G router to satisfy more reliable performance when the anchors are up or they decide to

The same device also has a socket where you can connect a standard telephone handset or analogue / DECT cordless base station so you use the 3G connection to make and take calls on the boat. This can make things “sound normal” if you want to contact someone on land or they want to contact you out on the water because of the mobile number associated with the SIM card associated with your service.

This modem would come in to its own with “shared” and “family” data plans that cover multiple devices and use a large data allowance. But it can come in handy with “high-end” data and mobile plans that have higher data capacity if this is your sole connection like, for example, a retiree who lives out on the water.

The device can connect to a 12VDC 580mA (peak-demand) power supply which would apply to most of the “live-in” boats.

What I would like to see for this device is some support for WPS-PBC connectivity such as a membrane switch or terminal block so one can add on a “WPS PBC connect” button. Here, this can provide the quick wireless-network enrolment for devices and software that support it like Windows 7/8 computers, Android phones and most consumer electronics.

Similarly, this unit could be in a good position to support the new Wi-Fi PassPoint standards for hotspot login especially on the WAN side. Here, this function, along with a “range extender” or Wi-Fi to Wi-Fi routing function would team up well with the increasing number of marinas that are offering complementary Wi-Fi hotspot service as a service to the boaties who moor there. These features could cut out the extra hassle required with logging in to the Internet service whenever they arrive and tie up; and could allow for seamless cost-saving handover between Internet services.

Who know what this device and others like it could offer to the pleasure-boating community who work the coastline or inland waterways of many different countries in their vessels.

France to swing towards fibre-to-the-premises broadband

Article – French language

Fibre optique : le gouvernement lance une mission pour débrancher l’ADSL- m.01net.com

My Comments

Map of France

France – another area to go full-fibre

It is not just Australia where there is a drive to head towards fibre-to-the-premises broadband. The same situation is also happening in France where a government committee is working on supplanting the country’s copper telephone network with a fibre-based next-generation broadband network.

They have an interim goal for a report by end of 2013 with a final roadmap by end of 2014, which will detail how and when to go about this project and who is being affected. An issue that was being raised was implementing VDSL2 which theoretically yields 50Mbps over a short copper link for areas where fibre isn’t practical or affordable. This technology was just lately accepted as a communications technology by ARCEP who are the governing body for France’s telecommunications.

There was also the Intent to indemnify France-Télécom because, as a classic telecommunications operator and being a spinoff of the Postes Téléphones Télégraphs government body, they own the copper network. This is similar to what has happened with Telstra in Australia when it came to the NBN.

I also see issues that are likely to be raised about the difficult parts of France Métropolitaine (L’Héxagone) and the Outre-Mer territories where fibre-optic installation may be considered difficult or costly. Could this also invoke implementation of technologies like fixed wireless?

Similarly, the competitive nature of France’s telecommunications and Internet-access sector could place requirements on this goal such as whether to cover more or less territory quickly. It can also encompass protection of competitive access to the new infrastructure such as the “multifibre” method or the “single-fibre” method.

It would be interesting to see who else would be daring to head down the full fibre-to-the-premises route while dumping copper for their telecommunications and Internet infrastructure.