Introduction

I am reviewing the Rotel RCX-1500 network CD receiver which is one of the first “big-set” hi-fi units that I have reviewed that can do proper Internet radio and benefit from the DLNA Home Media Network. Previously I have been reviewing Internet radios that are mainly “small-sets” which are table / clock radios or portables and are intended for use as secondary or auxiliary audio devices.

The product class

This unit is infact a CD receiver, a class of “single-piece multi-function” hi-fi music system which continues from where the music centres and casseivers (receivers with integrated cassette decks) of the 1970s and early 1980s left off. Here, some of these units were equipped with the functionality and quality of modest separate-unit hi-fi systems yet they offered this in a single box, which you could just hook up a pair of speakers to. The manufacture of high-sndard pieces of this class of equpment had diminished through the late 80s. This is although Bang & Olufsen were consistent in this field at a premium price and a few other manufacturers like Proton, Bose and Onkyo were releasing in to their model ranges  one or two receivers with integrated CD, tape or MiniDisc transports that weren’t just second-rate music systems.

Then there had been a slow but sure renaissance in this class of good-quality integrated-function hi-fi equipment as the trend for “downsized” living especially in “executive” city apartments became more intense. This is where most of the good hi-fi names ran with at least one CD receiver in their line-up that didn’t come with a set of substandard speakers and this Rotel RCX-1500 that I am reviewing is one such piece of equipment.

Price

Unit alone: AUD$1999 (recommended retail price)

Speakers (Cabasse Antigua MT30): AUD$999 / pair (recommended retail price)

Functions

Connections

Speakers

This unit was tested with a pair of Cabasse Antigua MT30 bookshelf speakers connected using premium audio cables. These speakers were also on loan from the distributor so I can review this unit properly. They are built using an orthodox two-way driver arrangement and use a bass-reflex enclosure and can work with amplifiers that have a minimum power output of 75 watts and maximum of 500 watts. As far I was concerned, these speakers worked very properly with all kinds of music and could yield a decent sound for their size.

The Rotel CD receiver

Functionality comments

Slot-load CD player

It is also worth knowing that this CD receiver has a pair of pre-out connections so one can connect it to a more powerful and better-sounding power amplifier or a pair of active speakers like an active subwoofer or some of the active speakers like B&O’s Beolab range or any of the Bose Powered Acoustimass speakers.

It can connect to your home network via Wi-Fi or Ethernet using supplied network-adaptor dongles. The Ethernet option can also allow it to be used with a HomePlug AV network segment using an appropriate “homeplug” adaptor and I would recommend this as a “no-new-wires” option for connect this CD receiver to the home network.

This functionality allows this CD receiver to provide Internet radio or work with a DLNA-compliant media server that is on your home network. The only limitation with this function is that it doesn’t work as a MediaRenderer which means that you have to select your network media using the Rotel CD receiver’s display.

The tuner is “up to the minute” with broadcast radio in Europe and Australia by supporting FM RDS as well as DAB+ radio. There are two antenna connections for both FM and DAB but you can choose to use the FM aerial for DAB. It came with two aerials – the typical “T-wire” for FM and a small whip one for DAB. With this one, it was able to pick up Melbourne’s DAB multiplexes reliably as long as it was near a window.

But I would rather that this unit be connected to an outdoor aerial especially for FM reception so it can provide clear signal reception. You may also be able to use a digital-optimised Band III aerial for better DAB+ reception especially on fringe areas.

You can connect an iPod or iPhone to the front USB socket using the data cable supplied with your Apple device and the sound that is played off the iPod will be converted to an analogue form using the Rotel receiver’s internal digital-analogue converter. As well, this same socket is used for playing music held on USB memory keys.

The CD player is a slot-load type that performs as expected for a decent-standard player. It can play the regular CDs or file-based MP3 discs and gives “best-case playback” for any CDs recorded with the HDCD mastering technique. This does yield to high-quality sound from these discs.

As for connection of external equipment, this is feasible with a line-in connection in the form of RCA connectors or SPDIF digital in the form of coaxial or optical connectors. There isn’t a line-out connection that is independent of the volume control for use as a recording connection, which may limit this unit’s utility with cassette or MiniDisc decks.

It is also controllable by a supplied remote control which has a numeric keypad for direct access to 30 presets in each of the radio bands – FM, DAB and Internet. As well, this remote also allows for direct access to tracks on a regular CD and is a preferred control surface when you are searching content on a well-stocked media server or using the CD receiver’s setup menus.

The unit's remote control

This unit’s amplifier is engineered for sound quality. Here, the volume control is a motor-driven potentiometer managed through the control on the front or the remote control. There aren’t any tone-control options, which may please audio purists who believe that tone adjustment affects sound quality.

The display is the white bright fluorescent display but uses four lines of text. This also works with the menu-based operation for advanced functions.

Sound quality

The sound quality for the Rotel RCX-1500 CD receiver is what you would expect for equipment in its class. This is even so with the Cabasse Antigua speakers that I am testing this unit with.

It comes across as being tight and good across all frequencies. This means that it gives all the instruments in a sound recording a proper chance rather than sounding like the old pub jukebox. This has come across so well with well-recorded rock like Peter Gabriel’s “1 – Car” album which was considered to be in the same league as Pink Floyd. Here, you still had that “punchy sound” while hearing the vocals and other instruments.

This system was even performing well with classical music especially as I was playing through a recording of Beethoven’s Violin Concerto which was done with “period” instruments. Here, the combination of this CD receiver and the Cabasse speakers shone through the whole of this popular concerto and was clear with all of the instruments.

As for handling the audio codecs, this amplifier answers the requirement for handling properly-encode music properly especially if you use the “maximum” throughput settings for the codecs like 320kbps MP3 or 192kbps WMA.

Limitations and points of improvement

The network connectivity could be improved on by not requiring the user to deal with easy-to-lose dongles. This is more so with Ethernet as most Internet-enabled hi-fi components and TVs use integrated circuitry with an Ethernet socket on the back.

As well, the Rotel could benefit from WPS setup for Wi-Fi wireless networks especially as most current-issue routers implement this easy-to-use setup method.

An improved version of this unit could support a proper tape loop and a phono input for use with a turntable especially as a lot of the older people may keep records or tapes lying around and could benefit from a simplified system with these inputs.

Conclusion

This is one network-enabled CD receiver that I would recommend for people who have a pair of good-quality bookshelf or “piece-of-furniture” speakers that they wish to keep going but want to benefit from newer sources like music held on their home network or iPod; or Internet radio. I would also consider this unit as a the core of a simplified music system if they want to choose their own good speakers.

This unit, along with the Cabasse Antigua speakers or bookshelf speakers of a similar standard, would be an ideal simple music system for use in an apartment or small house by people who place high value on music. It is especially more suitable with older retired people who are moving towards smaller flats or retirement villages.

Hi all!

You may have come in to this site either via a Web search, an email or from the URL that you may have copied from posters, cards and other offline advertising that I may have put up around town; and have found the site of interest. But you don’t have the time to keep checking on it for newer articles.

There are three ways to follow this site so you don’t miss the latest articles:

1. RSS feed (Webfeed) – You can subscribe to an RSS feed using your feed reader. This may be integrated in your email program, Web browser or operating system;’ or there will be many different applications for all the computing platforms that will show a list of articles in an RSS feed. Your browser may highlight the orange RSS icon to indicate that there is the Webfeed to subscribe to. Click on this to start subscribing with your browser’s feed-reading function.

For other applications, the URL is:

http://feeds.feedburner.com/HomeNetworkingAndItInformationAndDiscussion

This feed is updated as and when new articles are published.

2. Your email inbox. There is an option to subscribe to this site so you have new articles appear in your email inbox. This will be provided in the form of a “Subscribe” form located in the sidebar on the right hand side of your page in the standard view and you fill in your email address, with a CAPTCHA-protected “opt-in” form popping up when you click the “Subscribe” button. Another way will be to visit this URL:

http://feedburner.google.com/fb/a/mailverify?uri=HomeNetworkingAndItInformationAndDiscussion

When you fill in your email in either of these forms, you will get a confirmation email from Feedburner Email Subscriptions which has a link that you must click on in order to start receiving the latest articles in your email inbox.

The emails come on days where there are new articles posted and if two or more articles are posted on the one day, you will receive one email with all the articles.

3: Facebook Feed: If you are a member of Facebook, you can follow this site by either scrolling down to the “Visit this on Facebook” box and clicking the “Like” button in that box or visiting this Facebook page.If you haven’t logged in to Facebook at that point, you will be required to log in.

Subsequent articles will appear in your Recent Items Facebook list under “HomeNetworking01.info” and you will have the introductory text of the article as the copy so you can follow through and continue reading it at the site. This may not be feasible if you are checking your Facebook account from a device that doesn’t start a Web-browsing session when you click on a link.

These articles will appear as and when new articles are published.

At the moment, there isn’t the ability to start email or Facebook subscriptions from the simplified mobile user interface unless you click on the links in this article. You may have to click this link or click the “Go to Desktop View” option at the bottom of the page to open the regular view for creating an email or Facebook subscription. This will be a problem if you are viewing this from an Android or other tablet which shows the mobile view by default.

I hope this is of use to you as you keep following this site and reading the articles written within.

With regards,

Simon Mackay

Introduction

I am reviewing the HP Envy 100 ePrint-enabled all-ine-one printer which is another member of the HP “Envy” high-end stylishly-designed equipment range. This printer is styled not like an ordinary all-in-one printer but something that wouldn’t look out of place alongside domestic hi-fi or home-cinema equipment.

Prices

Printer

Recommended Retail Price: AUD$399

Inks and Toners

The printer itself

The printer with its scanner lid open and paper input and output exposed

There is a lot about this printer’s styling that makes it not like the typical all-in-one printer that I have used or reviewed. This printer has a design that wouldn’t look out of place in a hi-fi or home-theatre equipment rack with its slimline and neat styling. Here, it would be as slim as the typical VHS video recorder or “personal-TV service” unit. Even the scanner lid reminds me of that flat-glass lid used to cover the turntable on a mid-1980s “music-centre” stereo system because of the way it lies flush with the top of the printer and is made of that similar glass.

Where do the documents come out of?

The way the printer is styled may confuse some people because there isn’t an obvious paper tray or output tray.

The printer's paper output tray

When you want to use the printer from the control panel, you work it using a large touchscreen on the front of the unit. This touchscreen can be positioned at an angle for easier operation but will swing up when the printer is printing out anything. The paper is loaded in to a shallow removeable tray which you pull out from the front of the printer.

Even the SD slot for your camera card may be hard to find but it is located on the top right edge of the printer, under a small flap.

Setup

The printer can work with 802.11g/n WiFi networks that are secured using WPA2-PSK technology. You enter the passphrase for these networks using a virtual keyboard on the unit’s touchscreen; but it also works properly with WPS “simplified-setup” routines that most recent-issue home and small-business routers support.

On the other hand, the software that is supplied on the CD-ROM leave a lot to be desired. It doesn’t operate properly with network setups and you may have to try many attempts at setting this software up on your computer. This is more so with firewall software that may be slow to respond.

Walk-up functions

The printer works as expected for a colour copier. As well, it can print from or scan to SD cards or USB memory keys. Like with all printers, these functions could be improved through increased memory in the unit. Here, images obtained from the scanner or removable media could be copied to the memory before being printed so as to allow quicker and more productive operation; such as being able to quickly copy many pages or print pictures from your camera then continue snapping more pictures.

Through the use of the ePrint Web apps, this printer can print documents on demand. As well, some of these ePrint apps work as client programs for various photo-sharing or social networking sites, so you can print pictures from your albums that exist on these sites.

It also supports the HP ePrint “email-to-print” system which allocates the printer an email address so you can send documents or photos to that address for printing. This also allows for Apple iOS devices to print documents and images directly to this printer using AirPrint.

It is also worth knowing that Android users can download the “HP iPrint Photos” app from the Android Market to their device so they can print photos through this printer. At the moment, there isn’t a full document-print solution available for this platform yet.

Computer functions

When used with a Windows 7 machine, this printer works tightly with the operating system, thus using functions like the Device Stage.

Even the ability to set up device-initiated scanning for a network-connected printer requires you to visit the Device Stage which comes up when you click on the printer in “Devices and Printers”. This feature has still got some problems with reliability in that it won’t start properly or expose the options to the printer’s control panel. This function is still something that has to be worked out and should be part of the operating system as I have touched on previously.

Other than that, it does work properly as far as computer-initiated printing goes. It also does offer proper support for basic and advanced UPnP printing functionality; something I find that is not implemented in many client devices like set-top boxes. This is not enabled by default and you would have to go to the printer’s Web page which is at its URL, then go to “Networking” to select and enable this function.

Print Quality

This printer works as expected for an inkjet printer when it comes to printing documents. But the real test I notice with these inkjet printers is how they handle photographic images. The pictures don’t come out as saturated as most of the other inkjets that I have tested.  As well, they are not as dark as those printed on most of the other inkjet printers that I have tested.

Limitations and Points of Improvement

As with all HP inkjet printers that have auto-duplex printing, this function still requires a significant top and bottom margin, which can be very limiting for desktop publishing applications. I have raised this issue on forums operated by HP, but they say that this is a designed-in limitation to assure proper auto-duplex operation but I have seen auto-duplex-equipped inkjets available from other manufacturers, namely Canon, which can print this way without requiring the top and bottom margin.

As well, the use of a tri-colour ink cartridge makes the printer more costly to run because you can’t replace individual colours as needed. This could be improved upon by HP when they refine their low-profile print mechanism that is used in this printer. The slimline design also has a limitation with the paper tray not being able to hold much paper.

The manufacturer-supplied software could benefit from a lot of work on it, especially with the way it operates with network printers. This includes making it work tightly with the operating system’s services and properly discovering the printer and announcing the computer’s network location. This is always something that manufacturers tend to forget about when designing their printers.

Taking the concept further

The way HP have integrated a duplex-capable inkjet print mechanism with “front paper feed” as well as an LED-based scanner mechanism into a chassis the size of a typical VHS video recorder has amazed me with this unit.

Here, they could take the concept further with various product ideas for inkjet printers and similar devices. One could be a rack-mount printer for “built-in” applications, where the printer is pulled out like a drawer when it needs to have new ink added or be serviced.

Similarly, there could be the ability for HP to design a transportable “all-in-one” printer modelled on the Envy 100 that is designed for “on-location” workforces. This would have a handle of a style not dissimilar to that found on a boombox and having the scanner lid kept closed by a latching mechanism. Electronically, it would have full WiFi and Bluetooth connectivity and work on 12 volts DC, thus being able to work from a car’s cigar-lighter socket or a 12-volt rechargeable battery pack.

As well, this mechanism could encourage HP to work towards mainstreaming low-profile “front-feed”  inkjet printer designs for the home and small-business market/

Conclusion and Placement Notes

This printer is targeted to those who place a lot of emphasis on style and may suit those of us who are particular about what can be placed in the common living areas of the house. But it wouldn’t be worth using as a main printer for a home or small business because of the two-cartridge system or the reduced paper capacity. Here, I would recommend it for use as a secondary printer intended for use in the family room if you can accept the price for this application.

Introduction

Brother MFC-J6720DW A3 desktop inkjet multifunction printer – uses piezo printheads rather than thermal printheads

If you own an Epson or Brother inkjet printer, you may end up with a situation where there is reduced print quality for particular colours even if you have just put in a new ink cartridge. The symptoms will be in the form of one colour not appearing in your printout or gaps at regular intervals in the printed output.

This is a problem that I have experienced previously with an Epson inkjet printer that I had earlier on through 2000 to 2004. As well I had run in to this problem when I was reviewing the Brother MFC-6490CW A3 inkjet multifunction printer; and had to run this printer through the cleaning cycle a few times after installing a new cartridge.

The piezoelectric print head working as a pump

An espresso coffee machine that uses a pump to push the water through the ground coffee – similar to how the piezo printhead in an Epson or Brother printer works

This may be to do with the way these printers work compared to most other brands. Here, the ink is pushed through the printer using a piezoelectric pump mechanism which integrates technology similar to what is used to force the hot water through the ground coffee in a domestic espresso-coffee machine when you make that latte or cappuccino.  On the other hand, the HP, Canon and Lexmark printers use a thermal a.k.a. “bubble-jet” method of pushing the ink drops through the printhead in a similar vein to the way water is pushed through a drip-filter coffee maker.

HP, Canon and Lexmark printers use a printhead that works in a similar way to how this drip-filter coffee maker passes water from its tank to the ground coffee

If you happened to fill one of the previously-mentioned espresso machines with water after allowing it to run dry, then decide to make a coffee, it will take a very long time for the coffee to come through. As well, you will hear the machine’s pump initially make a loud noise, then make a softer noise as it takes on the water. The loud noise that you hear initially is due to the pump encountering an airlock. Then the softer noise that you hear is what is happening as the espresso machine’s pump is being primed and airlocks are being removed out of the pipework in the machine. In some cases, you may have to run water through the machine’s cappucino steam-jet as if to make hot water for this to work.

Similarly, what can happen with your Epson or Brother printer is that after allowing an ink to run dry, you will end up with airlocks in the pipework or printhead. This may be more so if you try to “run it out” beyond the “out-of-ink” warning so you could get those last few pages printed. This same situation tends to happen with newly-purchased printers because you have to establish a constant flow of ink through the pipework and printhead.

What can you do?

The cleaning cycle

Newer Brother printers represent the settings menu with “tools”

If this happens, you may have to do one of two things. One would be to run the printer through the “cleaning” cycle a few times as this will “prime” the printhead pumps. You may have to do this after you install a new ink cartridge.

Maintenance menu in Settings menu

In most of these printers like the previously-mentioned Brother printer, you will need to start the cycle through going to the “Maintenance” or “Setup” menu on the printer’s control panel, then select the “Cleaning cycle” function. Recent Brother printers use a “tools” icon for access to the Settings and Maintenance functions.

Head cleaning menu under Maintenance menu

Older single-function printers and some Epson multifunction printers may have a dedicated “cleaning cycle” button or require you to hold down a button like the “Paper Eject” button to start this cycle. To be sure, check the instruction manual that has come with the printer or the manufacturer’s Web site concerning how to activate this cycle.

Creation and use of “printer cleaning sheets”

Another would be to prepare a “printer cleaning sheet” for each colour. This would be a drawing that has a rectangle of the specified colour (black, cyan, magenta or yellow) that covers at least 50% of an A4 or A3 sheet of paper. You could create this with your favourite graphics, presentation or desktop-publishing program. Even a “paint” program like Microsoft Paint could do the job. Then make sure you save this as a file. If you created a multi-page file such as the PDF file that I have created and made available for you, you have one page per colour and print this page out for the colour that needs attention. Otherwise, print out the file pertaining to the colour that needs attention. You may have to print this a few times to prime all of the pumps in the printhead.

The idea behind creating and printing these sheets of paper is that the printer has to keep running the pumps continuously so they are primed and the ink starts flowing through all the nozzles properly. As far as the paper is concerned, you just then use the blank side of these sheets you printed out as notepaper, such as to keep beside the telephone.

How do you prevent airlocks from getting in to your printer?

The only way to prevent airlocks from appearing in your Epson or Brother inkjet printer is to make sure you have a spare ink cartridge on hand and ready to install when the ink cartridge in the machine is running low. Here, your machine will notify you of this with a warning message on its display or a flashing light. As well, the print-monitor utility on your computer that comes with the machine’s drivers will flash up a “low-on-ink” warning.

Similarly, if you anticipate large print runs you may find it a good idea to stock up on ink cartridges and/or purchase the extra-capacity cartridges. This may be more so if you are doing campaign-driven print runs; frequently printing on A3 using your A3-capable inkjet printer; or using special media like glossy paper.

If you do use generic-brand or third-party cartridges, you may have to keep an eye on the ink level because these cartridges may not work as accurately as the manufacturer-original cartridges. In some cases, you may even have to run the cleaning cycle every time you change these cartridges.

Those of you who use an aftermarket continuous-inking system may need to keep an eye on the bottles associated with these systems so that you know when to replace the inks. As well, you need to make sure that the system is in good order with the pipes secured properly and full of ink. This also applies to those of you who use an Epson EcoTank printer that has user-refillable ink tanks mounted on the side of the printer. Here, you need to check the ink tanks on the machine’s side to make sure your machine isn’t getting too near the “empty” mark.

Conclusion

Once you know how to use the cleaning cycle and / or create a “printer cleaning sheet”, you can be able to avoid an unnecessary service call or product return concerning your Epson or Brother inkjet printer.

Note: This article was originally published on March 2011 but has undergone a major revision in 2015 to illustrate the different types of coffee machines and to encompass the newer Brother printers. It has been revised in August 2016 to encompass Epson’s EcoTank printers which use large user-refillable ink tanks.

Press Release

QNAP Security Moves into the Consumer Mainstream Security by Introducing A New Affordable Standalone Surveillance Video Recording System

Product Page

VioStor VS-2004L – 4 channels (4 caneras concurrently recorded)

VioStor VS-2008L – 8 channels (8 cameras concurrently recorded)

My Comments

I have shown interest in the QNAP VioStor VS-20xL series network video recorders because QNAP have presented the equipment as an affordable recording solution for small businesses who are taking their first steps towards IP-based video surveillance.

One reason these units earn their keep as far as I am concerned is that they permit the business to improve the video surveillance system without the need to replace more equipment than they have to replace. The only limitation with these units is that they require an external computer as the video-surveillance system’s visual display and they can only maintain two hard disks per unit, support basic single-disk operation as well as dual-disk “large-volume” (JBOD and RAID 0) and dual-disk mirrored (RAID 1) operation.

There is even the ability to support capacity and operation-mode changes in certain situations without having to shut down the NVR. Other examples of upgradeability include the ability to buy another QNAP VioStor system, especially one of the VS-200xL Series, to increase the concurrent recording capacity as you add more cameras but keep the existing unit recording away.

As well, these systems still provide the full expected functionality like alarm recording on motion detection, camera “alarm input” or URL-based alarm triggering. The latter functionality can work with software that can pass URLs on certain events like particular transactions such as voids and no-sales.

They are of a similar size to an entry-level dual-disk network-attached storage and do support connectivity to USB devices like USB storage devices and control links for uninterruptible power supplies that serve this unit. The unit can backup the video data either to a USB hard disk or to a network-attached-storage device on the same network.

These recorders can work alongside cameras that are ONVIF-compliant but this may not guarantee a true “plug and play” experience when you want to “evolve” the system yourself.

There are still a few “holes” concerning the useability, such as inability to support integration with UPnP-compliant routers when setting up remote-monitoring links. This is even though manufacturers like Draytek and AVM are supplying small-business-grade routers that have this functionality. As well, there isn’t a standaline client-side program for the common desktop operating systems that works as the system’s dashboard. This could affect system performance especially with older computers or standard operating environments that are based around competing Web browsers.

These units, especially the VS-2004L,  could become the heart of an “analogue-upgrade” kit which has one of these units and a 4-channel video encoder which allows a small business to add network functionality to their existing analogue-camera-based CCTV system. As well, the VS-2004L, when worked along with four capable network video cameras, could be what is needed to provide video surveillance for something like a small shop.

At least this is a step towards fulfilling a challenge of providing an affordable IP-based video-surveillance system for the small business that doesn’t skimp on quality or functionality.

What is the “Family House”?

The “Family house” is typically a  house, that is usually resided in by one or two older parents where the children have “left the nest”. The adult children and their grandchildren regularly visit this house to see the parents and, in most cases, they stay in this house on a temporary basis. In a lot of situations, family friends will end up visiting or staying over at this house in the company of the family members.

Such situations typically include the children who normally are out of town coming in to town for business, leisure or to attend family events; the children seeking temporary accommodation while their house is being built or renovated, or are between houses. It may also include the “family house” being close to a place of study which a grandchild is enrolled at and the grandchild stays there while completing a course of study. As well, the parents typically end up caring for the very young grandchildren in this house while their children work or undertake other activities.

This concept may also extend to any occasional-use accommodation that the family shares responsibility in maintaining, like city apartments or holiday / seasonal houses. In the latter situation, a household or the whole family ends up staying in this accommodation.

Common practice with IT at these locations

Compaq Presario CQ42 entry-level laptop

In these places, there may not be an intention to have full Internet service at these houses because the main householder may not be a regular Internet user. But what can happen is that other people in the house make regular use of the Internet. This would typically be achieved through each device that other people bring in using a mobile-broadband service for their Internet.

A small number of portable devices that someone owns can be served with this kind of Internet connection using a “Mi-Fi” mobile router or a smartphone that implements a “personal hotspot” mode.

A significant cost difference

But this may only work best with one rarely-used device on the premises. This is because most of the wireless-broadband services work on bandwidth that is narrower than wireline broadband services like cable-modem or ADSL services.

As well, the tariff charts for these services are typically more expensive than most of the wireline broadband services. Here, you end up paying more for the same bandwidth allowance and usage quota than you would for a cable or ADSL broadband service of equivalent standard or, for the same money you pay for a wireless-broadband service, you would obtain more bandwidth and usage quota.

Should I establish the full home network here?

It would be worth it to establish the full home network with a fixed broadband service if there is at least one Internet terminal that is used regularly by at least one of the parents, a relative or another regular houseguest. The Internet terminal, which can be a desktop, “all-in-one” or laptop / notebook computer or a tablet MID like the iPad, can be either owned by the parent or a regular houseguest like the grandchild who is staying regularly at that location.

The Internet deals commonly available

The common marketing practices amongst most wireline broadband Internet providers who run a voice telephony or multichannel pay-TV service is to offer a sweet deal where the customer benefits from reduced service costs if they have their telephony or TV service provisioned by this Internet provider. Some of these deals are provided as “triple-play” packages especially if all services come through the one physical line.

If you are in a highly competitive Internet-service market like UK, Australia or France, you may find these deals being offered at some very attractive prices that make you not even think twice about signing up.

I often suggest that people take advantage of these abovementioned offers when choosing their Internet service for these locations because this may help with saving money on this service. These deals will usually be advertised in brochures that accompany the regular bill for the phone or pay-TV service that they currently are subscribed to.

In some houses where there are older people who don’t use the internet frequently, one or more younger people who make use of the Internet could incite the older people to make increased use of the Internet. This can be done by the younger person sharing their computer with them, demonstrating various Internet and computing skills and assisting the older person with these skills.

As well, you may find that there are new media paths being opened up by a home network associated with a wireline Internet service in the “family house”. Examples of this include use of Internet radios that pick up the Web feeds of overseas and obscure radio stations as well as access to Internet TV through the use of a compatible TV or set-top box and music, pictures or video on-demand through the house with cost-effective equipment.

It also includes the like of Netflix or Spotify as content services; along with TV stations offering catch-up / video-on-demand services that can even be viewed through the big-screen TV with an appropriate set-top box.

Who should bear the extra costs

Issues that may come up include whether the houseguests like the children should cover any extra costs associated with use of a full broadband Internet service at the “family house” if the main householder isn’t the one using that service. This may be of little impact to the guests because the wireline broadband services will be relatively cheaper than running a wireless broadband service which just services one computer.

Establishing the full home network

The network-Internet “edge”

Netgear DG834G ADSL2 wireless router

You may have to make sure that you use a wireless router if you have a laptop computer or other portable Internet device on the premises as the network-Internet “edge”. Most of these devices are for sale at very affordable prices and you could get one through your Internet service provider as part of your broadband Internet deal. As well, I have written a buyer’s guide about the entry-level wireless routers. The limitation with most of the units supplied by your Internet service provider is that they may yield average performance and may not offer the functionality as a retail-supplied unit.

Assuring proper wireless coverage

Some houses that have interior walls made out of double-brick or stone may have problems when it comes to operating a wireless network. This is something I have touched on in this Website many times and can be handled with an auxiliary access point installed in the area where wireless-network coverage is below par and connected to the router via an Ethernet or HomePlug wired backbone as explained here.

Or pay attention to newer distributed-WiFi setups that are increasingly being offered by many network-hardware manufacturers and Internet service providers. They will have a router and at least another access-point module and are designed to be simple to set up and manage and spread the Wi-Fi coverage around the house. Most of these setups rely on you using a particular range of equipment offered by the same manufacturer but pay attention to devices that are compatible with Wi-Fi EasyMesh technology. These will allow you to use equipment offered by different manufacturers as long as it works to this standard. If you are in Australia and sign up to fixed broadband service through Telstra, you may find that your Smart Modem Generation 2 modem-router that they supply you supports Wi-Fi EasyMesh.

It is also worth knowing about how to encompass outbuildings like bungalows in to the scope of the home network, a reality which will be of importance for country or outer-urban properties. Here, I have written a good feature article on how to achieve this goal in a manner that is best suited to your particular scenario.

Printers

As well, when you need to install or upgrade the printer, you may need to go for a unit that has network connectivity of some sort. If the main computer device happens to be a tablet computer, you may have to look at a printer that is supported by an app or the tablet’s operating system. You may also have to make sure your printer supports AirPrint and Mopria driver-free printing functionality so it can print from mobile devices running iOS or Android.

Brother DCP-J562DW multi-function printer

You don’t have to have a machine with all the “bells and whistles” if it is not going to be used regularly – here an economy-level network capable printer may just suffice. Even so, you should prefer a printer that uses separate colour cartridges rather than the tri-colour cartridge because you won’t be wasting colour ink if one colour runs out.

There is an exception if the house has a regularly-used fax machine. Here, you could replace the fax machine with a network-enabled multifunction printer which has integrated fax capabilities. Again, these would be much more cheaper to run than the typical older “thermal-belt-driven” fax machines that some households still consider as fax machines.

Network-attached storage devices

It may be worth considering the purchase of a one-disk network-attached-storage device at a later time as the network is used more. This may allow for pooling of common files like driver files for various peripherals as well as a backup storage for data held on one or more of the computers.

As well, most of these devices provide media-server functionality for Apple iTunes and standards-based DLNA setups so that your pictures, videos and music can be “pulled up” on demand. This may work well as a central media store which can be used as a way of “offloading” the media from a computer’s hard disk or making it available to everyone at all times without the need to have a computer on all the time.

This function will become more relevant as more consumer AV equipment becomes equipped with some form of network connectivity and is able to play or show AV content from the Internet or media servers like these network-attached storage devices. Infact I have covered this topic very heavily on this site and you can look at this article here as it pertains to these devices as media servers.

Conclusion

I would recommend that you look at the value of providing a full home network with wireline broadband service to the “family house” if you notice that there is a strong likelihood of regular Internet use there.

Updates

This article has been updated on September 2020 to encompass newer trends affecting Internet at the “family bouse” including distributed Wi-Fi setups, more online audio and video and printers supporting AirPrint and Mopria.

Introduction

I am reviewing the Canon PIXMA MG-6150 multifunction inkjet printer which is positioned as the top inkjet multifunction in Canon’s lineup that isn’t equipped with fax functionality.

Prices

Printer

Recommend Retail Price: AUD$299

Optional Extras:

Bluetooth module: BU-30 $69

Inks and Toners

The printer itself

This machine comes in a piano-black finish and has the user-interface LCD lying flat with the top of the lid. But when you turn it on, the LCD screen lights up and various touch buttons light up in a manner that isn’t dissimilar to either the way a pinball machine or the dial panel on a mid-1970s stereo receiver lights up.

As you use the printer in its various operating modes, some of the buttons light up as required. These buttons are actually touch-panel buttons which will make you think somewhat of operating some of the mid-1980s B&O hi-fi equipment, especially the Beogram CDX CD player which had this similar kind of touch panel. As well, the main display is able to come up at an angle by pushing on a button located behind the display.

The display can come up at an angle

The printer lit up in operation mode

Walk-up printing

The printer has various “walk-up” functions like copying and printing from camera cards. As well, it can print from cameras using PictBridge, which I have used to print “proof-prints” of the pictures that I took for this review. It can even print PDF documents from USB memory sticks. But its handling of this function can be very fussy at times, especially if you use a PDF prepared by a desktop-publishing program.

As well, there is the ability to create your own stationery like notepaper, graph paper and music manuscript paper. For this latter paper type, you can turn out 12-stave pages which is a lot more flexible for most music tasks like “vocal and piano”, organ or “four-part harmony” music.

Computer functions

The software that is supplied on the CD-ROM can be very tricky to load and can think that there isn’t the printer available. But I have visited Canon’s Website and downloaded the latest version of the software and this has loaded properly and discovered the printer as it should.

The device-initiated scan-to-PC software leave a lot to be desired. The user interface looks very pale and confusing and you can only allocate one path for device-initiated scan jobs. This would be to place the files in a particular folder on the host computer or to attach them to an email in Outlook. As well, it doesn’t support other email clients for scan-to-email. You can determine how the document should be scanned from the printer but there are two forms already set – A4 document to PDF or 4×6 snapshot to JPEG.

Paper handling

Paper loading paths in this printer

The paper handling is very similar to some of the other high-end A4-capable PIXMA printers like the direct-connect MP-610 and the fax-enabled network-connectable MX-870 that I previously reviewed on this site. Here, the printer has a front-loadable tray for A4 plain paper as well as the standard rear-mount paper feed tray. This means that you can keep a reserve of ordinary paper on hand in the printer yet use the back path for glossy paper and other special media.

Also, these printers have a fabulous auto-duplex function that has very little registration problems for double-sided documents and can work “to the edge” as far as margins go. This would put the double-sided printing function beyond satisfying the need to avoid wast and in to a league where you can work on both sides for your desktop-publishing needs.

As well, there is a CD printing attachment that slides in the front but you have to flip down a tray that is deeply hidden there. There isn’t any storage for the CD printing attachment so you could then easily lose that part if you occasionally print on CDs.

Printing reliability and quality

The printer is very reliably as far as the mechanism is concerned and could handle large print jobs very easily.

Its document-printing quality is what you would expect for a high-end consumer inkjet unit. When it prints photos, the pictures come out strong on saturation but do lack a bit of definition.

6 ink tanks in this printer

This is even though it uses a six-colour ink system whereas most inkjets that I have reviewed use either four colours or five colours if they are “photo-rated”. Sometimes it may be true that the number of colours in a photo-rated inkjet may not yield particular improvements.

Points of improvement

The printer could benefit from an improved scan-to-PC program which gives the user greater choice on how the image should be handled. As well, it could support the ability to define more than one path for scan-to-PC jobs initiated from the control panel.

As well, Canon could supply high-capacity cartridges for these printers as an extra-cost option so that users are covered if they have a huge run of print jobs from the printer.

Conclusion and Placement Notes

I would recommend this printer as being on my shortlist of printers worth deploying as a home-office or secondary-use (study) multifunction printer for the home if you don’t value faxing or email-to-print.