Tag: 5G mobile broadband

Is fixed-line broadband still relevant in the era of 5G wireless?

Articles

Gigaclear fibre-optic cable - picture courtesy of Gigaclear

A fixed-line connection like this Gigaclear fibre-to-the-premises setup ….

Will 5G kill off home broadband as we know it? | TechRadar

5G vs Fiber: Will 5G make fiber obsolete? | NetMotion Software

My Comments

This year will see a question about whether Gigabit or faster fixed-line broadband Internet services will be relevant in the face of 5G cellular wireless broadband services.

5G wireless broadband will have a theoretical maximum bandwidth of 10-50Gbps and an average bandwidth of between 100Mbps to 200Mbps. This average speed will start to increase as it becomes less dependent on 4G wireless broadband technology. But these figures are affected by the kind of reception your 5G endpoint device is getting from the service.

Cellular antenna in street

… or 5G wireless cellular broadband (whether fixed-wireless or mobile broadband) – what is relevant?

This typically is delivered in the form of mobile broadband services that are used with smartphones, tablets and other portable devices. But it is also being delivered as a “fixed-wireless” broadband service where the customer connects a more-powerful 5G modem to their home network. Optus is providing this kind of service offering to declare independence from Australia’s NBN service but it is offered in areas where it isn’t technically feasible or too costly to deploy fixed broadband service.

Current-generation fixed-line broadband services are capable of at least 1Gbps upload/download n the case of fibre-to-the-premises services. The ideal setup or “gold standard” for this kind of service is fibre-to-the-premises but various fibre-copper setups are being used that can deliver close to this speed. These are based on DOCSIS 3.x cable-modem technology, RJ45 Ethernet cable technology or G.Fast DSL-based telephone-cable technology with the copper run covering a small neighbourhood or a multi-tenant development.

The 5G technology would be cheap to establish but costly to maintain and upgrade. This is compared to fixed-line broadband technology that would be expensive to establish but cheap to maintain and upgrade. In most cases, an upgrade would be about new equipment in the racks at the headends at least. Or a fibre-copper service may be upgraded through a change of topology towards a full-fibre (fibre-to-the-premises) setup.

Typically, fixed-line broadband would be the preferred solution for those of us living in larger built-up communities. It is although there are efforts like B4RN who are pushing fibre-to-the-premises fixed-line broadband in to rural areas within the UK. Sparser areas may prefer to implement 5G wireless-broadband technology with a few large low-frequency 5G cells covering those areas.

Both technologies can complement and serve each other in various ways.

Since 5G technology is based on a cellular-wireless approach, each base station needs to link to a backhaul to pass the data to each other and to other communications devices connected to wired infrastructure around the world. As well, the 5G wireless technology operates at radio frequencies up to 6GHz thus requiring many smaller “cells” (base stations for a cellular-wireless network) to cover a populous area. Even the use of many of the very small cells like picocells or femtocells to cover buildings or shopping strips would require the use of a backhaul.

In this case, fixed-line broadband networks especially fibre-optic networks can be used to provide this backhaul.

Increasingly, Wi-Fi network segments connected to fixed-line broadband setups are being considered as a complementary wireless-network solution. This may be about providing load-balancing for the 5G-based cellular service, even as a failover mechanism should the user not experience ideal reception conditions or the network underperforms. The classic example here would be indoor settings where building materials and the like obstruct 5G cellular coverage using the typical smartphone’s own antenna.

On the other hand, the 5G technology will maintain its keep for mobile / portable use cases while fixed-line broadband networks will serve in-building network use cases. 5G will also satisfy those use cases where it is technically unfeasible or cost-prohibitive to deploy a fixed-line broadband network.

For that matter, the mobile / portable use cases are what the technologists are banking on for 5G wireless-network technology. Here, they are envisaging the likes of self-driving vehicles, drones and the like depending on this technology for communication with each other. This is along with it being as a data backbone for the “smart city” that is driven by the “Internet of Everything”, facilitating improvements for things like service delivery, public safety / security, transport, energy efficiency and the like.

But 5G and fixed-line broadband, especially fibre-to-the-premises broadband, will exist on a “horses for courses” approach. Here, one technology may be about data reliability and infrastructure upgradeability or the other may be about mobile / portable or transient use.

AT&T moves towards a Mi-Fi with full 5G and Wi-Fi 6 for the American market

Article AT&T Netgear Nighthawk 5G Pro MiFi router press picture courtesy of AT&T

AT&T adds new a Netgear 5G hotspot that you will actually be able to buy | CNet

From the horse’s mouth

AT&T

NETGEAR Nighthawk 5G Hotspot Pro Arrives at AT&T Sept. 18 (Press Release)

5G Product Page (announcing pending arrival of this Mi-Fi hotspot)

NETGEAR

NIGHTHAWK® M5 MOBILE ROUTER (MR5200) – Product Page

My Comments

Telstra has become the first telco in the world to offer a “Mi-Fi” mobile-broadband router that supports both 5G mobile broadband across all bands including mmWave on the Internet side and Wi-Fi 6 connectivity on the LAN side. This was offered when they initially launched their 5G mobile broadband service and this kind of coverage was important for Australian use where 5G services are likely to be deployed in sparsely-populated regional and rural areas.

AT&T now is offering to the general American public a Mi-Fi device that works on the full 5G waveband for its Internet connection side, and Wi-Fi 6 for its local network side. Here, that covers the lower frequencies of the 5G waveband along with the higher frequencies associated with mmWave coverage.

They previously offered a 5G Mi-Fi device but this was offered to a very limited customer base. Also Verizon offers a similar device with 5G and Wi-Fi 6 but their device only works the mmWave bands rather than the whole of the 5G band.

In addition, the Netgear Nighthawk 5G Mobile Hotspot Pro, also known as the MR5200,  that AT&T offers has an Ethernet LAN connection for use with printers, network-attached storage devices, desktop computers and smart TVs. It has USB-C connectivity, most likely for power and data (5G modem) functionality.

The Netgear Nighthawk 5G Mobile Hotspot Pro is fit for purpose with American emergency service thanks to its ability to work with FirstNet, which is AT&T’s LTE emergency-services communications network,

This device is expected to cost US$510 upfront or US$17 / month over 30 months before service costs. As well, AT&T are offering data service plans for this device with you paying US$60 per month for a 15Gb monthly data allowance or US$85 per month for 35Gb.

Their overage fee is US$10 for every 2Gb over your plan’s limit and, at the moment, they don’t have a “throttled bandwidth” option available for their plans in lieu of that. That will limit AT&T’s 5G mobile-broadband service’s role to a secondary or temporary Internet service. It is symptomatic of an American telecommunications and Internet-service that has become highly concentrated over the last five years with it heading slowly back to the “Ma Bell” days.

AT&T is rolling out 5G mobile-broadband coverage over most of the key cities in the USA that matter with this coverage increasing at the moment.

But AT&T’s Netgear Nighthawk 5G Mobile Hotspot Pro is one of the first devices of this kind offered to a dense Northern-Hemisphere country that ticks all the boxes for the latest wireless mobile-communications technologies. That is to provide 5G mobile broadband across the low frequency bands and high-frequency mmWave bands and supply this data across a Wi-Fi 6 LAN.

It is showing that mobile-telephony carriers are fronting up with Mi-Fi devices that work the 5G mobile broadband and WI-Fi 6 standards, leading to some very capable devices and services.

Qualcomm launches a 5G chipset for affordable smartphones

Qualcomm Snapdragon 690 5G reference phone press picture courtesy of QualcommArticles

Qualcomm brings 5G to cheaper phones with Snapdragon 690 processor | CNet

Snapdragon 690 announced: 5G comes to Qualcomm’s mainstream chip family | Android Authority

Qualcomm’s Snapdragon 690 chipset brings 5G to cheaper phones | Engadget

From the horse’s mouth

Qualcomm

Qualcomm Announces First 5G Snapdragon 6-Series Mobile Platform (Press Release)

My Comments

5G mobile broadband technology will be coming to an affordable smartphone near you thanks to a new chipset that Qualcomm has now launched.

This chipset, known as the Qualcomm Snapdragon 690 chipset doesn’t just have a 5G modem for this class of product but also has processing power to handle some high-end tasks like 192 megapixel high-resolution photography or 4G HDR videography. There will also be support for Wi-Fi 6 (802.11ax) and Bluetooth 5.1 technology along with support for improved artificial-intelligence / machine-learning. It is although Qualcomm haven’t built mmWave support in to the 5G mobile broadband modem.

The silicon is being rolled out at the moment and will have a low bill-of-materials price compared to premium or midrange chipsets that Qualcomm offers. This will mean that a finished Android smartphone product would be expected to retail between USD$300-USD$500 before any telco subsidies. This is compared to the Apple iPhone SE which is a4G only product going for USD$400.

Phones based on this chipset will typically be manufactured by the likes of LG, Motorola, HMD Global (Nokia), Sharp, TCL (Alcatel) and the like. This will include various original-equipment-manufacturers who specialise in selling products under a private-label agreement with the distributor, retailer or telco.

The coronavirus plague, with the various event and business shutdowns associated with it, has  thrown a spanner in the works regarding bringing 5G mobile broadband in to the mainstream. As well there hasn’t been much market interest in newer smartphone technology and there would be a strong market for affordable smartphones thanks to people concerned about how much they spend, forced by the COVID-19-driven financial downturn.

But this chipset may also be about allowing manufacturers to take less of a gamble when it comes to creating a smartphone or tablet product that embodies a unique form of innovation or answers a particular market’s needs. An example that could come to mind would be a smartphone that has its radio circuitry optimised for long-range reception and pitched for rural and remote areas. Similarly, LG could pull it off again with a smartphone that has a DAB+ digital-radio tuner that would have a greater zone of relevance thanks to more European countries running DAB+ digital radio full time.

What is being highlighted here is that Qualcomm is making it feasible to provide 5G mobile broadband technology at a price affordable for the masses.

Lenovo offers the first computer with built-in 5G mobile broadband

Articles

Lenovo Yoga 5G convertible notebook press image courtesy of Lenovo

Lenovo Flex 5G / Yoga 5G convertible notebook -the first laptop computer to have 5G mobile broadband on board

‘World’s first 5G PC,’ the Lenovo Flex 5G, now available on Verizon for $1,400 with a Snapdragon 8cx | Windows Central

Lenovo Flex 5G Laptop Landing Worldwide This Week | Ubergizmo

From the horse’s mouth

Lenovo

Lenovo™ Delivers on 5G Computing with Leading Global Network Operators (Press Release)

Verizon

Product site and purchasing links (US only)

My Comments

The 5G mobile broadband specification is surfacing this week in an “Always Connected PC” form factor with integrated mobile broadband thanks to Lenovo.

The computer will be the Lenovo Flex 5G also known as the Yoga 5G in some markets and is a 14” 2-in-1 convertible laptop. This uses ARM RISC silicon in the form of a Qualcomm Snapdragon 8cx CPU and Qualcomm Adreno 680 graphics infrastructure. It will be delivered with the ARM-compiled build of Windows 10 Pro. Its display is a 14” Full HD LED LCD and will come with 8Gb RAM and 256Gb SSD storage.

Lenovo Yoga 5G convertible notebook press image courtesy of LenovoThe use of a Qualcomm Snapdragon 8cx as the Lenovo Flex 5G’s CPU is primarily about implementing CPU technology that has higher performance compared to what is offered in a smartphone or mobile-platform tablet. This is due to the computer being in a larger chassis and not having the thermal constraints associated with the kind of housing a smartphone would have.

For connectivity, the 5G mobile broadband modem supports mmWave and sub 6GHz bands, similar to what is expected in the latest high-end smartphones. As well, it can connect to Wi-Fi 5 (802.11ac) networks and Bluetooth peripherals up to the Bluetooth 5.0 specification. Lenovo expects the Flex 5G to run on its own battery for 24 hours before needing to be charged.

Of course, due to the use of ARM RISC silicon, the Windows ARM build will be running Windows software that isn’t compiled for ARM RISC microarchitecture in an emulation form. This may be seen to yield compatibility issues for some software like games or device drivers.

Initially it will be offered in the USA through Verizon for USD$1400 or USD$58.33 per month as part of a contract. But Lenovo is forging partnerships with other telcos in other markets like EE (UK), Sunrise (Switzerland) or CMCC (China) as well as offering it direct through its Website later this year.

What I see of this is that Lenovo being the first to offer 5G mobile-broadband integration in a regular computer. There will be issues with having to support certain markets’ and telcos’ mobile-broadband needs such as Telstra’s wish to support proper performance in regional, rural and remote areas of Australia when they sell any mobile-broadband device. This will mean having to vary the device to suit these requirements.

At the moment, I see this class of computer appealing towards mobile professionals and nomadic users who prefer to use mobile broadband as the preferred Internet connection away from the office.

Telstra’s latest Mi-Fi router ticks the boxes for future-proof operation

Article Telstra 5G Wi-Fi Pro mobile broadband router product picture courtesy of Telstra

Telstra now have a mmWave-capable 5G hotspot | PC World

From the horse’s mouth

Telstra

Telstra 5G Wi-Fi Pro router

Press Release

Product Page – has latest pricing and mobile-broadband service contracts

5G mmWave Mobile Broadband Technology

White Paper

My Comments

Telstra has fronted up with their latest premium portable mobile broadband router for the 5G mobile-broadband infrastructure. But this “Mi-Fi” known as the Telstra 5G Wi-Fi Pro ticks all the boxes as far as being future-proof is concerned.

Here, on the WAN (Internet) side, this device supports 5G with mmWave technology while on the LAN (local network) side, it works on the latest Wi-Fi 6 standard for 2.4GHz and 5GHz bands thus bringing your mobile network up to date with the latest standards.Of course it can work with existing 4G LTE networks and exploits what Telstra has to offer in this context.  This has a 4500mAh battery that can be removed and can run for nine hours providing full data transfer. It can be charged via a USB-C connection according to the QC 3.0 protocol and the open-frame Power Delivery 2.0 protocol, meaning you can charge it with your brand-new Ultrabook’s charger or run it for a long time using a USB-C PD powerbank.

The Telstra 5G Wi-Fi Pro costs AUD$599 straight up. Or you could buy this device on a post-paid Telstra service plan for AUD$24.95 / month on 24-month plan plus mobile data plan the cost of the mobile-broadband data service.

What is this mmWave 5G mobile broadband all about?

The mmWave 5G mobile broadband technology is an extremely-high-frequency variant of 5G mobile broadband technology which works between 24GHz to 100GHz. Telstra’s initial trial run of this technology at Gold Coast worked on 26GHz. The same technology has been sued with various fixed point-to-point wireless links and satellite-Internet services but is use as a mobile broadband technology is what is being identified here.

Due to the very short wavelength, mmWave 5G technology will have a short operating range of a few hundred metres from the base station. This means that to cover a significant area, the service provider will need to install many “femtocell” base stations across the area and they will typically operate at a signal strength similar to a Wi-Fi access point or router. It means that the electromagnetic energy levels are 1000 times below the maximum energy level expected for safe operation.

Therefore mmWave 5G technology is pitched for operating environments where there is a high concentration of users so as to avoid “loading” very few base stations with many users, thus denying the users adequate bandwidth. This is a situation most of us will have experienced when attempting to benefit from an Internet resource on our mobile devices while on a packed commuter train.

Here, you will see this technology be used at busy public-transport interchanges including airports; event venues like convention centres or sports stadiums; or shopping centres. You may even find it being used in high-rise residential, commercial and hotel developments where there is expected to be many people within the development.

At the moment, Telstra has to license the necessary spectrum in order to set up a mmWave 5G service and will need to see other devices come on board prepared for this technology.

mmWave 5G mobile broadband will simply be pressed in to service as a complementary technology to the existing 5G mobile broadband technologies. In this case it is about highly-concentrated operating environments with many devices.

Consumer Electronics and Personal IT trends for 2020

Every year in January, the Consumer Electronics Show is run in Las Vegas, USA and this show does give a glimpse in to what trends will affect consumer electronics and personal IT. In most cases, these are products that will be on the marketplace this year or products that are a proof-of-concept or prototype that demonstrates an upcoming technology.

The problem is that this exhibition focuses on what will be available in North America but a lot of the technology will be relevant to the rest of the world. In a lot of these cases, localised variants will appear at various trade shows or PR events that occur in Europe or other areas.

As well, the trade-show circuit will attract service-level information-technology companies who don’t need to make hardware or have a hardware platform, or be a content creator. Here, it will be simply about the provision of IT-based services as part of a ubiquitous computing environment including the concept of experience-driven computing.

Connectivity Technology

Over the past year, the two main technologies that were called out regarding online connectivity or the home network were 5G mobile broadband and Wi-Fi 6 (802.11ax) wireless local networks. This is about very-high-bandwidth wireless data communications whether out and about or within your home or other small network.

As various radiocommunications regulatory agencies around the world “open up” the 6GHz waveband for Wi-Fi network use with the USA’s Federal Communications Commission the first to do so, the Wi-Fi Alliance have created a specification identifier for network equipment working this waveband. Here, it is known as Wi-Fi 6E as a way to identify the fact that the device can work the 6GHz waveband, and is in contrast to Wi-Fi 6 (802.11ax) devices that only work the 2.4GHz and 5GHz wavebands.

D-Link DIR-X5460 Wi-Fi 6 router press picture courtesy of D-Link USA

One of D-Link’s Wi-Fi 6 routers that also supports Wi-Fi EasyMesh – setting the standard for home network technology this year

Both these technologies became real with an increase in client devices or small-network infrastructure hardware supporting at least one of these technologies. This included laptop computers and smartphones having this kind of functionality baked in to them as well as more home-network routers, distributed-WI-Fi systems and range extenders being equipped with Wi-Fi 6. There is even the fact that some of the network-infrastructure vendors like Linksys and NETGEAR are offering routers that combine both technologies – 5G mobile broadband as a WAN (Internet) connection and Wi-Fi 6 as a LAN (local-network) connection.

A step in the right direction for distributed-Wi-Fi networks was to see major home-network brands offer routers and/or range extenders compliant to the WI-Fi EasyMesh standard. This allows you to create a distributed Wi-Fi network with equipment from different vendors, opening up the market for equipment from a diverse range of vendors including telcos and ISPs along with a pathway towards innovation in this space.

Bluetooth hasn’t been forgotten about here with the new Bluetooth audio specification being “set in stone” and premiered at CES 2020. This specification, known as Bluetooth LE Audio, works on the Bluetooth Low Energy profile and supports the LC3 (Low Complexity Communications Codec) audio codec that packages the equivalent of an SBC audio stream used by Bluetooth audio setups in half the bandwidth. This allows for longer battery runtimes which will also lead to smaller form-factors for audio devices due to the reduced need for a larger battery.

It also supports multiple independent and synchronous audio streams to be sent from one source device to many sink devices. This strengthens use cases like hearing aids that work with Bluetooth and may supersede the inductive loop as a technology for assisted-listening setups. As well, the multiple-streaming technology will be a boon to applications like multichannel Bluetooth speaker setups; or Bluetooth headphones as part of assistive audio, multilingual soundtrack options or semi-private listening arrangements.

The Bluetooth LE Audio technology is to be released in the first half of 2020 with compatible devices being on the market by 2021. But there will also be the issue of having device support for this technology being baked in to operating systems as a class driver.

Dell XPS 13 2-in-1 Ultrabook - USB-C power

USB 4 will be the next stage for hardware connectivity and will include Thunderbolt 3

As for wired peripheral interconnection, USB 4.0 will be surfacing as a high-speed connection standard for computers and mobile devices. There will be compatibility with Thunderbolt 3 due to Intel signing over the intellectual property rights for that protocol to the USB Implementers Forum. But this may be used by some computer vendors as a product differentiator although the market will prefer that USB 4 computers and peripherals work with those that use Thunderbolt 3. Let’s not forget that the physical connector for USB 4 will be the Type C connection.

Let’s not forget that newer Android phones will use USB Power Delivery as the official standard for transferring power from chargers or powerbanks to themselves. This is about avoiding the use of proprietary fast-charge technologies and using something that is defined by the industry for this purpose.

Computer trends

Lenovo IdeaPad Creator 5 15" clamshell laptop press picture courtesy of Lenovo USA

Lenovo IdeaPad Creator 5 15″ clamshell prosumer / content-creator laptop

At the moment, as I outlined in the article about “prosumer” content creators being identified by computer manufacturers as a significant market segment, this year is being seen as a time to launch performance-optimised computers targeted at this user group. These units will be optimised to work with popular content-creation software in a sure-fire manner.

Let’s not forget that Lenovo is tying up with NEC in order to create the LAVIE computer brand that targets mobile professionals. This was after Toshiba spun off their laptop-computer division as “Dynabook” brand then sold it to Sharp; and Sony sold off their VAIO computer brand with it existing as a premium computer brand. But is this symbolic of what the Japanese computer names are heading towards where they focus on creating premium business laptops and tablets.

As well as offering their newer-generation CPUs, Intel has demonstrated that they can offer their own high-performance personal-computer display infrastructure. They even demonstrated a graphics card that use Intel-designed discrete GPU technology. This leads towards them competing with NVIDIA and AMD when it comes to discrete graphics-infrastructure technology and could lead to a three-way race in this field.

It is alongside AMD placing a lot of effort on their Ryzen CPUs which are leading towards them in a position to effectively compete on a par with Intel’s Core CPUs. As well, Intel and AMD could head towards creating performance computing setups that are based around their CPUs and discrete graphics infrastructure technology, including setups that have the CPU and discrete GPU on the same silicon.

There is also an increase in the number of “Always Connected PCs” that run with ARM RISC microarchitecture rather than the traditional Intel i86/i64 CISC microarchitecture. They will be about operating on batteries for a very long time and have 4G, if not 5G mobile-broadband modems with classic SIM or eSIM service authentication. Most likely I would see them as being the direction for portable mainstream business computing.

Dell G5 15 Special Edition budget gaming notebook press picture courtesy of Dell USA

Dell G5 15 Special Edition budget gaming laptop with AMD Ryzen and Radeon silicon

For gaming, Dell has premiered a budget gaming-grade laptop that uses an AMD Ryzen CPU and an AMD Radeon graphics processor but is styled like their other “G Series” gaming laptops. As well, Lenovo took an interesting step with one of their gaming laptops by using Intel integrated graphics processors for its graphics infrastructure while equipping it with a Thunderbolt 3 port. Here, the user is to buy an external graphics module, typically the Lenovo BoostStation card-cage unit which is their first product of its kind that they released, to have the machine perform at its best. What this is about is a trend towards creating an entry-level performance laptop product range, very similar to buying the increased-performance “GT” variant of a popular family car model.

Lenovo ThinkPad X1 FOLD prototype folding-display computer press picture courtesy of Intel USA

Co-engineered by Intel and Lenovo, ThinkPad X1 FOLD is a foldable-screen device built on the Intel Core processor with Intel Hybrid Technology (code-named “Lakefield”). (Credit: Lenovo) – an example of what folding computers are about

 

Another trend that is being shown frequently is multiple-screen or folding-screen portable computers. This is being promoted by Intel and Microsoft in the context of Windows 10X and newer Intel chipsets. It is being driven by the multiple-screen or folding-screen smartphone that Samsung and others are on the verge of releasing as finished products. But this technology will have a limited appeal towards early adopters until it is seen as legitimate by the general user base.

As far as small-form-factor desktop computers are concerned, Intel is working towards a modular “next unit of computing” platform which has the whole computer system on a card the same size as a traditional PCI expansion card. This platform, known as Ghost Canyon uses the “Compute Element” which is the user-swappable card, is intended to bring hack the joys of us upgrading a computer’s performance by ourselves even if we go for a smaller computer platform.

Connected-TV technology

This year has heralded interest in 8K UHDTV which has effectively twice the resolution of 4K UHDTV. As well, the 8K Association has been formed in order to set standards for domestic 8K UHDTV applications and promote this technology.

It is in conjunction with ATSC 3.0, also known as NextGenTV, being premiered at CES 2020 as a new direction for free-to-air TV in the USA. It us being valued thanks to people moving away from cable and satellite pay-TV services towards Netflix and other video-on-demand services augmented by free-to-air TV. Here, it will allow Americans to benefit from 4K UHDTV and Dolby Atmos technology via the TV antenna. Like with DVB and HBBTV-based standards used in Europe and Oceania, this technology combines the over-the-air signal with broadband Internet data to achieve advanced TV experiences.

There is also increased robustness as far as antenna-based reception is concerned which may allow for use of indoor antennas without their associated problems. As well, mobile users will benefit from this newer technology for on-the-road viewing. But there will also be an emphasis towards broadcast-LAN operation with one tuner offering a broadcast signal amongst multiple TVs. Users can upgrade their existing televisions to this technology by connecting an ATSC 3.0 set-top box to their TV as they see fit, but there will be some TVs, most likely “living-room” models from a few manufacturers, that will support this standard.

The 4K AMOLED screen is entering the “Goldilocks” territory when it comes to product price and screen size – not too big and expensive, not too small or cheap, but just right. It is seen by the trade as a “mid-market” territory but, for a TV, it is about something that appeals to more people without being too ostentatious or requiring one to pay a price’s ransom.

The advantage it has over the LCD screen that rules this market territory is to have increased contrast and richer colours, something that those of you who have a smartphone or tablet with an OLED display benefit from. As well, it is a technology that legitimises the high-dynamic-range and wide-colour-gamut video reproduction technology being pushed by the film and video industries.

Here, Sony released the first 48” 4K AMOLED screen that would be able to fit most viewing areas. This includes apartments and small houses as well as use in bedrooms, or secondary lounge areas including living rooms which aren’t frequently used for watching TV. As well, some AMOLED TV manufacturers are pitching sets that cost under US$1000. Here, this price point puts the AMOLED TV within reach of most middle-class families who are considering upgrading to this kind of technology without paying a price that sounds too vulgar.

Another trend affecting TVs is support for variable high refresh rates. Here, it appeals towards games consoles being able to work with game-optimised variable-refresh-rate monitors typically partnered with PC-based desktop gaming rigs, offering the same kind of display refresh rate as the display card on a gaming-rig PC would offer. This is being factored in because the large-screen TV is being valued in the context of gaming, especially with one-machine multiple-player games or the excitement of playing a favourite game on that big screen.

As well, I see the Apple TV and Android TV platforms as dominant smart-TV / set-top-box platforms due to the existence of strong code bases, strong developer communities and a well-nurtured app store. Here, the Android platform will appeal to TV vendors who haven’t invested in a smart-TV platform along with some third-party set-top box vendors. But the Android TV platform as a set-top-box platform has to be disassociated from the so-called “fully-loaded” Android boxes that are sold online from China for access to pirated TV content.

This is being driven by an avalanche of video-on-demand services that will appear over this year. Some of these will be subscription-based and offer new original content produced by the service’s owner while others will use advertising, perhaps as part of a freemium arrangement, and work heavily on licensing deep back-catalogue material. There will also be an effort amongst the new video-on-demand providers to take an international approach, appearing in multiple markets around the world, most likely with the goal of licensing content in all international markets concurrently.

It will even lead to each content-production name having its own video-on-demand service that primarily hosts content from its stable. But the question that will come about is how many video-on-demand subscriptions will we be having to budget for and maintain if we want content that reflects our choices.

Audio Technology

The DAB+ digital broadcast radio platform is increasing its footprint within Europe and across some parts of Africa and Asia. It includes some European countries like Norway and Switzerland moving their broadcast infrastructure away from AM and FM radio to this technology.

Pure Sensia 200D Connect Internet radio

Pure Sensia 200D Connect Internet radio – a representative of the current trend towards the “hybrid radio” concept

Here, it would be about an increased variety of devices that have broadcast-radio reception functionality based on this platform, including those that have Bluetooth and/or Internet-radio functionality. As well, more vehicle builders are being encouraged to supply DAB+ radios as factory-standard in all of their vehicles. Let’s not forget that value-priced DAB+ and Internet radio equipment will be equipped with a colour display that shows things like station branding or album cover-art while you listen to that station.

RadioDNS will be something that facilitates a hybrid broadcast-broadband approach to broadcast radio. This will include the ability to switch between broadcast-radio channels and an Internet radio stream for the same radio station or allow for richer supporting content to appear on the set’s display. It can also be about a “single-dial” approach to finding stations on broadcast and Internet bands. But RadioDNS has been given more “clout” in to the USA due to it being able to work with AM, FM or HD Radio (IBOC digital radio on AM and FM) which is used there.

Sonos’s partnership with IKEA, the furniture store who sells furniture that you assemble yourself with an Allen key, is demonstrating that a high-end multiroom-audio platform can be partnered with a commodity retail brand. What it could lead to is an incentive to build these kind of platforms around a mixture of premium, value and budget units, allowing for things like a low-risk “foot-in-the-door” approach for people starting out on that platform or people who have the premium equipment building out their system with cheaper equipment in secondary listening areas. It could even put pressure on the industry to adopt a common standard for multiroom-audio setups.

The streaming audio-on-demand scene is moving in a manner as to shore itself up against Spotify. Initially this is about offering either an advertising-supported free limited-service tier as what Amazon and Google are doing, or to offer a premium service tier with a focus on CD-quality or master-quality sound which is what Amazon is doing. But it could easily go beyond the “three-tier service” such as improved playlists, underrepresented content, support for standalone audio equipment, and business music services. As well, your ISP or telco could be providing access to a streaming-audio service as part of their service package or you buy a piece of network-enabled audio equipment and benefit from reduced subscription rates for an online music service.

The headphone scene is setting some strong contenders when it comes to excellent value-for-money for noise-cancelling Bluetooth headsets.

Bose initiated this battle with the QuietComfort 35 II headphones with the technological press’s reviewers seeing them as a standard setter for this class of headset. Then Sony introduced the WH1000XM3 headphones and these were seen on a par with the Bose cans but at a more affordable price with some press using terms like “Bose-killers” to describe them. Bang & Olufsen came in to the party and offered a premium noise-cancelling Bluetooth headset known as the Beoplay H9. But lately Bose also answered Sony by offering the Noise Cancelling 700 headset that effectively did that job in a minimalist form. This is while Sony are intending to launch the WH1000XM4 this year to raise the bar against Bose and their current product.

As far as “true wireless” active-noise-cancelling earbuds are concerned, Apple with their AirPods Pro and Sony with their WF1000XM3 have established themselves at the top of the pack for excellence. What I see of this is someone else could answer them to achieve that same level of excellence especially at a value price. This product class is also likely to benefit from the Bluetooth LC Audio specification due to the requirement for a small battery in each earbud and the small size of each earbud.

What Apple, Bose, Sony and B&O are highlighting is that they could easily compete with each other to achieve excellent products when it comes to headphones you use with your laptop, smartphone or tablet. It could even be a chance for other companies to join in and raise the bar for premium everyday-use headset design, including the idea of having audiophile headphone qualities in this class of headset.

Voice assistant platforms and ambient computing

Amazon Alexa and Google Assistant will still bring forth newer devices, whether in the form of speakers or displays. But Amazon Alexa and Microsoft Cortana will be part of the Open Voice Initiative allowing the same physical hardware to handle multiple voice assistant platforms.

A question that will arise through this year is whether there will be a strong direction towards having these devices work as a fixed audio or video telephony endpoint. This is whether the device works in a similar fashion to the classic landline telephone service with its own number; or as an extension to a smartphone that is part of a mobile telecommunications service.

The voice-assistant platforms will end up becoming part of an ambient computing trend that is underscored by facilitators like Internet of Things and distributed computing. Here, it is about computing that blends in with your lifestyle rather than being a separate activity.

As far as the Internet Of Things is concerned, the Connected Home over IP protocol was set in stone. This effort, facilitated by Amazon, Google and Apple with the oversight of the Zigbee Alliance, is about an IP-driven Internet-Of-Things data transport architecture. The idea is to do away with protocol gateways which were being used with various smart-home applications but the manufacturers were goading consumers to use their own protocol gateways with their devices rather than a third-party solution. There will be an emphasis on a safe secure interoperable Internet-of-Things network.

Data security and equipment maintenance in our personal and business lives

The Social Web will be considered a very important part of our lives with us primarily benefiting from it on tablets, smartphones or highly-portable laptops.

But it will still be a key disinformation vector. One of the new methods expected to be exploited this year is the creation of deepfakes. These are audio and video items created using artificial intelligence to make it as though a person said something when they didn’t. There will even be the ability to make the voice or face of a deepfaked person appear older or younger than they were when they were recorded, while make the voice or face appear as fluid as that of a real person.

Here, it will be used as a cyber weapon to create political, social and business instability by these representing our leaders whether they be in government, business or other circles. The deepfake will also be of value as a phishing tool in order to make the threat or plea appear to be more authentic to the victim.

As well, ransomware will begin to take on a network-wide dimension and affect business and service availability. Sensitive data, whether of a personal or business nature, will end up becoming the bargaining chip for ransomware hackers. This is in contrast to access to a computer user’s data resources which was often the case with ransomware.

The Internet Of Things will also be considered a continual security risk especially due to poor software and firmware quality control. It will lead to a conversation regarding the maintenance of our online devices through their lifecycle, including making sure they are running software that is stable and secure.

Then there is the “end-of-support” issue where a manufacturer ceases to show interest on older online devices that are currently in use. That is a question that is surfacing when one invests a significant amount of money in to the devices and people don’t want to throw out older equipment just because the manufacturer doesn’t want to support it anymore. It also goes against the grain of the post-Global-Financial-Crisis attitude most of us have adopted where we don’t want to support a throwaway society but want to see what we buy exist for the long haul.

The Sonos debacle raised the issue about what level of functionality the user should expect from their device along with how platform-based setups consisting of legacy and newer devices should behave. It also raised the issue of keeping the device’s software stable and secure.

Conclusion

This year will be considered a very interesting time for our online life as we see improvements to existing technologies along with newer conversations about how system-based technologies continue to evolve with a secure stable mindset.

What to expect in personal IT over 2019

Internet and Network technologies

Netgear Nighthawk 5G Mobile Hotspot press image courtesy of NETGEAR USA

Netgear Nighthawk 5G Mobile Hotspot – first retail 5G device

5G mobile broadband will see more carriers deploying this technology in more locations whether as a trial setup or to run with it as a full revenue service. It will also see the arrival of client devices like smartphones or laptops rather than just USB modems or modem routers supporting this technology.

Some users will see 5G mobile broadband as supplanting fixed broadband services but the fixed broadband technologies will be improved with higher data throughput that competes with that technology. As well, fixed broadband especially fibre-based next-generation broadband will also be required to serve as an infrastructure-level backhaul for 5G mobile broadband setups.

Wi-Fi 6 a.k.a. 802.11ax Wi-Fi wireless will be officially on the scene with more devices becoming available. It may also mean the arrival not just of new access points and routers supporting this standard but the arrival at least of client-side chipsets to allow laptops, tablets and smartphones to work with the new technology. Some countries’ radio-regulation authorities will look towards opening up the 6GHz spectrum for Wi-Fi purposes.

It also runs alongside the increased deployment of distributed-Wi-Fi systems with multiple access points linked by a wired or wireless backhaul. This will be facilitated with Wi-Fi EasyConnect and EasyMesh standards to create distributed-Wi-Fi setups with equipment from different vendors, which means that vendors don’t need to reinvent the wheel to build a distributed-Wi-Fi product line.

Consumer electronics and home entertainment

LG 4K OLED TVs press picture courtesy of LG America

LG 4K OLED TVs – a technology that could be coming more affordable over 2019

4K UHDTV with HDR technology will head towards its evolution phase with it maturing as a display technology. This will be with an increased number of sets implementing OLED, QLED or similar display technologies. It will also lead to more affordable HDR-capable TV models coming on to the scene.

Screen sizes of 75” and more will also cut in to affordable price ranges/ This will also be augmented with OLED-based screens becoming available in a “rollup” form that comes in an out like a blind or a traditional pull-down screen. Similarly, there will be a look towards the concept of “visual wallpaper” in order to justify the use of large screens in peoples’ households, including using the screen as a way to show messages or other information.

Online services will still become the primary source of 4K HDR TV content but the 4K UHD Blu-Ray disc will increase its foothold as the “packaged collectable” distribution medium for 4K video content. ATSC 3.0 and DVB-T2 will be pushed as a way to deliver 4K UHDTV content over the traditional TV aerial with this method of TV reception regaining its importance amongst the “cord-cutting” generations who dump cable and satellite TV.

JBL Link View lifestyle press image courtesy of Harman International

More of these voce-driven home-assistant devices with screens over this year

Another major direction affecting the home network and consumer electronics is an increased presence of voice-driven home-assistant services in this class of device. Typically this will be in the form of soundbars, wireless speakers, TV remote controls and similar home-entertainment equipment having endpoint functionality for Amazon Alexa or Google Assistant.

As well, the “smart screens” like what Lenovo, JBL and Amazon are offering will become more ubiquitous, with the ability to augment responses from a voice-driven home assistant. It will be part of having more household appliances and other gadgets work tightly with voice-driven home assistants.

It may be seen as an effort to bridge the multiple network-based multiroom audio platforms so you can run equipment from different vendors as part of one system. But the problem here will be that such setups may end up being more awkward to use.

The smartphone will be facing some key challenges what with people hanging on to these devices for longer and / or running two of them – one for their work or business along with one for personal life. Some new form-factors like folding smartphones will be demonstrated while some of them will be optimised for high-performance activities like gaming.

These devices are being augmented with the return of mobile feature phones or basic mobile phones. These phones are like the mobile phones that were on the market through the 1990s and 2000s and don’t connect to the home network or Internet or use these resources in a very limited way. They are appearing due to people wanting detachment from online life like the Social Web usually as part of the “back to basics” life calling, or simply as a fail-over mobile telephony device.

But as laptops and tablets become full-on computing and communications devices, the feature phones and basic phones will simply work in a complementary way to allow voice telephony or text messaging on the same service in a handheld form.

This situation is being underscored by more mobile carriers offering mobile telecommunications services that aren’t necessarily bound to one particular device. This is to face realities like the connected car, smartwatches with mobile broadband, Mi-Fi devices amongst other things which will be expected to use the same mobile service.

In the same context, there will be a market requirement for mobile communications devices, especially mobile phones, to support two or more services including multiple numbers on the same service. Primarily this will be driven by eSIM technology and over-the-air provisioning, but it will facilitate ideas like totally separate services for one’s business and private lives, or to cater towards people who regularly travel across international borders.

Security and regulatory issues

I do see a strong push towards more secure Internet-of-Things devices for residential, commercial and other applications over this year. This is as regulators in Europe and California put the pressure on IoT vendors to up their game regarding “secure-by-design” products. There is also the expectation that the Internet Of Things needs to be fit for purpose with transport applications, utilities, medical applications and the like where there is an expectation for safe secure reliable operation that cannot be compromised by cyber-attacks.

Here, it may be about the establishment of device-firmware “bug-bounty” programs by manufacturers, industry bodies and others used to unearth any software weaknesses. Then it will lead towards regular maintenance updates becoming the norm for dedicated-purpose devices. It may also include a requirement to for device vendors and end-users to support automatic installation of these maintenance updates but allow for manual installation of major “feature-addition” updates.

This is in conjunction with the Silicon Valley behemoths like Amazon, Facebook, Apple and Google having to change their ways due to them under increased scrutiny from governments, media, activist investors, civil society and end-users. It will affect issues like end-user privacy and data transparency, financial and corporate-governance / human-resources practices, along with the effective market power that they have across the globe.

Equipment design

Use of Gallium Nitride transistors for power conversion

A major trend to see more of this year is the increased use of Gallium Nitride transistor technology. This is beyond using this chemical compound for optoelectronics such as blue, white or multicolour LEDs or laser diodes installed in Blu-Ray players and BD-ROM drive for the purpose of reading these optical discs.

Here, it is to multiply the effect silicon had on the design of audio equipment through the 1970s leading to highly-powerful equipment in highly-compact or portable forms. This is through improved heat management that leads to the compact form alongside more powerful transistors for switch-mode circuits.

One of the initial applications will be in the form of highly-compact USB-C Power-Delivery-compliant chargers for laptops and smartphones. This year will be about an increased number of finished products and reference designs that, depending on the application,  yield more than 45W of DC power for USB-C PD applications from either 100-250VAC mains power or 12-24VDC vehicle / marine power. It could then be affecting multiple-outlet “charging bars” and similar devices where the goal is to have something highly compact and portable to power that Dell XPS 13 or Nintendo Switch alongside your smartphone.

I see it also affecting how power-supply circuitry for computers, peripherals, network equipment and the like is designed. This can lead towards equipment having the compact profile along with reduced emphasis on factoring in thermal management in the design like use of fans or venting.

ARM-based microarchitecture to compete with Intel’s traditional microarchitecture

In the late 1980s, the then-new RISC (Reduced Instruction Set Computing) microarchitecture excelled with graphics and multimedia applications. This is while Intel’s x86-based 16-bit traditional-microarchitecture used in the IBM PC and its clones were focused simply on number-crunching.

But 32-bit iterations of the x86 microarchitecture were able to encroach on graphics and multimedia since the early 1990s. Eventually it led to Apple moving the Macintosh platform away from the RISC-based Motorola CPUs towards Intel-based x86 and x64 traditional microarchitecture.

This was while Acorn Computers and a handful of other computer names worked towards ARM RISC microarchitecture which ended up in smartphones, tablets, set-top boxes and similar applications.

Now this microarchitecture is making a comeback with the Always-Connected PCs which are laptops that run Windows 10 on Qualcomm ARM processors for higher power efficiency. It was brought about with Microsoft releasing a Windows 10 variant that runs on ARM microarchitecture rather than classic microarchitecture.

This will lead to some computer vendors running with at least one or two of these computers in their ultraportable product ranges. But there is investigation in to taking ARM technology to higher-power computing applications like gaming and server setups.

The big question for Intel is what can they offer when it comes to microprocessor technology that can answer what Qualcomm and others are offering using their ARM processors.

Increased SSD capacity

The solid-state drive will start to approach bill-of-material per-kilobyte price parity with the 500GB hard disk. Here, it could lead towards laptops and ultra-compact desktop computers coming with 512Gb SSDs in the affordable configurations. This is also applying to USB-based external storage devices as well as what is integrated in a computer.

Here, the concept of high-speed energy-saving non-volatile storage that would satisfy a “sole computer” situation for a reasonable outlay is coming to fruition. What will still happen with the traditional mechanical hard disk is that it will end up satisfying high-capacity storage requirements like NAS units or servers. In some situations, it may lead towards more NAS units supporting multi-tier storage approaches like bring frequently-used data forward.

Conclusion

This is just a representative sample of what 2019 is likely to bring about for one’s personal and business online life, but as with each year, more situations will crop up over the year.

5G mobile broadband and Wi-Fi can complement each other

Article

Netgear Nighthawk 5G Mobile Hotspot press image courtesy of NETGEAR USA

Netgear Nighthawk 5G Mobile Hotspot – first retail 5G device

Why You’ll Still Need Wifi When 5G Is Everywhere, According To The Wi-Fi Alliance | Gizmodo

Wi-Fi Alliance: Wi-Fi, 5G will be complementary | FierceWireless

My Comments

There is some hype being driven by organisations defending the 5G mobile broadband and Wi-Fi wireless LAN technologies about their technology being the only one for our connected lives.

Some existing devices use 5G mobile-broadband technology but connect to endpoint devices like mobile phones using Wi-Fi. Initially they are routers being deployed by mobile carriers as a proof of concept or for network trials while AT&T were offering a “Mi-Fi” for retail sale in the USA that implements 5G technology. At the moment, 5G hasn’t been rolled out in the form of a smartphone or a mobile-broadband modem that is integrated in or connected by USB to a host computer.

Both Wi-Fi 5 (802.11ac and prior technologies) and 4G LTE mobile broadband have seen widespread deployment with each technology being seen by mobile users as offering a complementary role. Networks and equipment running the newer technologies (5G and Wi-Fi 6) will be backward compatible and offer a best-case approach to this compatibility. That is if both the network and end-user equipment run the same technology, the user gains the most benefit from what the new technology offers.

It has been identified that both technologies at their latest specification can complement each other. Here, 5G will earn its keep in the outdoors and in a mobile context while the Wi-Fi 6 (802.11ax) technology will earn its keep indoors. This is although public-access Wi-Fi networks will be seen by mobile carriers as a cost-effective data-offload tool.

Wi-Fi also has supporting technologies like WiGig and Wi-Fi HaLow. The former one will match 5G for speed but uses a short range equivalent to an ordinary room in the house, while the latter benefits from long range and power efficiency but doesn’t have the speed. Wi-Fi HaLow will then end up in the smart-home, smart-building, connected-car and smart-city application spaces where data throughput isn’t all that necessary. This is while WiGig will end up with virtual reality, augmented reality, 4G video and other bandwidth-intensive applications.

Then there is also the kind of spectrum available for each technology. Wi-Fi technologies primarily rely on unlicensed radio spectrum which makes them popular for households and businesses to deploy. It is in contrast to 5G which, like other cellular mobile telecommunications technologies, relies on licensed radio spectrum which the mobile carrier has to deal with the national radiocommunications authority organise and purchase a license to use.

There is also a trend regarding wireless-network equipment design where there is a software-defined approach towards the media-level components. This is facilitated with small-footprint high-capability computing power and can allow the same piece of equipment to honour newer standards.

Another factor that is never raised is the concept of the local network where data can be transferred between co-located devices at the same premises. 5G is really positioned as a wireless “last mile” setup for providing telecommunications and Internet service to the end-user. This is while Wi-Fi is intended primarily to work as a local network but is used to distribute a single broadband service to multiple endpoint devices.

What really is now seen is that the new 5G mobile broadband and Wi-Fi 6 (802.11ax) LAN technologies can complement each other in a horses-for-courses manner.

The first proven retail 5G device comes in the form of a Mi-Fi router

Netgear Nighthawk 5G Mobile Hotspot press image courtesy of NETGEAR USA

Netgear Nighthawk 5G Mobile Hotspot – first retail 5G device

Article – From the horse’s mouth

NETGEAR

NETGEAR Nighthawk® 5G Mobile Hotspot – World’s First Standards-Based Millimeter Wave Mobile 5G Device (Blog Post)

My Comments

There has been a lot of talk about 5G mobile broadband lately with Telstra running consumer trials of this technology in the Gold Coast using 5G “Mi-Fi” devices installed at fixed locations.

Of course, some people are seeing it as an alternative to wireline and fibre next-generation broadband deployments. Here, they are trying to see the technology as an enabler for the “digital nomadic” lifestyle where people live and work while roaming from place to place, keeping in touch with the world with mobile telecommunications technology.

But NETGEAR and AT&T have stepped forward with a production-grade consumer endpoint device as part of a production-grade 5G network being rolled out across the USA. It is typically assumed that the first production-grade consumer endpoint device for a new mobile broadband technology will be a smartphone of some sort or a USB wireless-broadband modem. But this time it is a highly-portable “Mi-Fi” router in the form of a NETGEAR Nighthawk 5G Mobile Hotspot.

Here, it is to use a device that could support high-throughput data transfer arrangements with a network of mobile devices and take advantage of what a production 5G network could offer. As well, the WAN (Internet) aspect of the NETGEAR Nighthawk 5G Mobile Hotspot is based on millimetre-wave technology and is designed according to standards.

Being the first device of its kind, there could be issues with connection reliability because of it implementing technology that is too “cutting-edge”. As more service providers “light up” standards-based 5G networks in more areas and more device manufacturers offer 5G mobile-endpoint devices, it will be the time to show whether 5G can really satisfy mobile-broadband users’ needs or be a competitor to fixed broadband.

I will update this article as NETGEAR and AT&T release more information about this Mi-Fi’s capabilities.