Tag: 802.11n specification

Article

Extended battery life with 802.11ac | Wi-Fi Alliance

My Comments

HTC have announced the next “refresh” of their One Android smartphone is to be equipped for 802.11ac 5GHz Wi-Fi segments. Plus there is some talk of other manufacturers fielding similarly-equipped smartphones for the up-and-coming Mobile World Congress that is to occur in Barcelona, Spain.

But, as with 802.11n, these phones will implement a single-stream variant of the technology. The reason why this is to be is because the digital signal processing required for handling a multi-stream signal required for these “MIMO-capable” systems is very taxing on the device’s battery runtime as has been explained in the article.

There will still be a significant data throughput and bandwidth bonus offered by these devices and, of course, smartphones that are equipped for 802.11ac will work with 802.11n networks on either the 2.4GHz or the 5GHz bands. This could really open up the 5GHz band for more of the handheld devices and legitimise its place in the creation of Wi-Fi segments.

A reality that is often missed with 5GHz is the fact that this band is like traditional FM radio on the 88-108MHz waveband compared to traditional AM radio on the 540-1600khz waveband. As I have observed even from childhood, it was feasible to pick up the AM stations over very long distances, even to the country areas while FM stations could be heard within the main urban areas. In some cases, a few AM stations with very low frequencies effectively covered the state of Victoria in Australia with a strong signal.

In this case, I would notice that access points operating on the 5GHz band used for 802.11n and 802.11ac will have shorter coverage areas compared to those on the 2.4GHz band for 802.11n. This will manifest in some situations where one router may cover a suburban block yet you may have to add a 5GHz range extender or access point with a wired backbone for the same coverage or the same router may have to use a stronger 5GHz antenna.

On the other hand, this band may allow for better handling of dense living areas like apartment blocks, but would require all Wi-Fi devices to support it in order to gain this benefit.

Who knows what this means for the evolution of the Wi-Fi wireless local area network especially as it is also considered as an offload companion to the 3G or 4G mobile broadband service?

Articles (French language – best resources)

Dossier -Test du Freebox Server | DegroupNews

Freebox Revolution – Test du Freebox Player | DegroupNews

From the horse’s mouth

Freebox Home Page – Free (France – French language)

My comments

Typically, the kind of equipment supplied to consumers by telecommunications carriers and Internet service providers for “triple-play”or similar Internet services has typically been drab in design and functionality. This is typically to work to the lowest-common denominator with both price, functionality and style.

The situation is very different in France where there is a lively competitive market for “triple-play”Internet service. Most urban or regional centres in this country are “dégroupée” for multiple competing ADSL-service operators. Here, these operators have access to the customers’ telephone lines as cable without paying France Télécom for a dial-tone service. There is also a steady rollout of fibre-optic service by the competing service providers for next-generation broadband Internet, with an overlaying requirement to provide competitive access to the ducts and poles for the fibre-optic service.

One of these major players is Free who have established a triple-play service for many years. Their latest iteration of the “Freebox” is now a benchmark for anyone offering a similar setup, whether in France or anywhere else.

I have previously covered the Freebox Révolution  in HomeNetworking01.info when a recent firmware update was released that integrated it with Apple’s ecosystem. As well, I have researched many French and English-language resources to learn more about this system.

The Freebox Révolution system

This system, like other triple-play setups offered in France, comprises of an Internet-gateway device, known as a “box”, and a set-top-box, known as a “décodeur”. These units have typically been interlinked by an Ethernet cable or user-supplied HomePlug kit, but is connected through a pair of “Freeplugs” which combine a power supply and a HomePlug-AV-Ethernet bridge in one box.

The units are a statement of industrial design in a similar way that Bang & Olufsen equipment are still a statement in this regard for consumer audio-video equipment. Both the Internet-gateway device and the set-top box have been designed by Phillippe Starck, known for extraordinary designs like the Parrot Zikmu network-enabled speakers or some of the LaCie external hard drives or network-attached storage systems.

Internet Gateway Device (Freebox Server)

This device consists of a broadband router, network-attached storage, VoIP ATA with DECT base station and audio player in one box.

It has a dual-WAN interface for either an ADSL2 service or an FTTH fibre-optic service. But the LAN functionality is one of the hallmarks of a cutting-edge device. It has 4 Gigabit Ethernet switched ports for Ethernet client devices as well as an access point for an 802,11n three-stream 450Mbps Wi-Fi segment. I mentioned previously that this unit also supports a HomePlug AV segment through the use of the supplied Freeplug adaptors. The Wi-Fi access point can also work as a separate “hotspot segment” for other Free subscribers.

The VoIP functionality works with an integrated analog-telephony adaptor and a DECT base station that you can associate 8 DECT cordless handsets with. These will provide full functionality with CAT-iQ DECT handsets.

The 250Gb NAS can work with the regular file-protocol suspects (CIFS, FTP, HTTP) but can work as a DLNA media server. It also works as a “staging post” for FTP, HTTP and BitTorrent downloads, the latter function being described as a “seedbox”. The recent firmware upgrades also implemented Apple TimeMachine support for incremental MacOS data backups. Of course, there is USB connectivity for 2 devices as well as eSATA connectivity for an external hard disk.

There are integrated speakers for playing media held on the hard disk, the Internet or an Apple AirPlay network but you can use it as an elementary amplified-speakers setup by connecting a Discman or iPod to its AUDIO IN jack. Of course you can play the music through better powered speakers or an amplifier using the AUDIO OUT jack.

This router is totally UPnP to the hilt with UPnP Internet-Gateway-Device for hands-free setup with Skype, games, MSN Messenger and the like; as well as being a UPnP AV / DLNA media server. Free could do better by integrating something like TwonkyMedia which can allow content discovery on metadata other than the file-system tree.

Let’s not forget that the Freebox Server is IPv6-ready as expected for a future-proof device. This is being augmented by the fact that ADSL Free subscribers in zone dégroupée aras or FTTH Free subscribers can have an IPv6 connection now.

Set-Top Box (Freebox Player)

This unit has an integrated Blu-Ray player with Blu-Ray 3D support (after new firmware added) as well as a digital-TV / IPTV set-top box / PVR. It connects to the TV via an HDMI connector or a SCART cable, both offering that “single-pipe” connectivity between the Freebox and the TV. Of course, there are connectivity options for other audio-video setups like SPDIF optical; and you can connect USB peripherals like SD card readers to this unit for direct viewing.

It is controlled via a gyroscopic remote control but has a supplied game controller as an alternate input device. Of course, you can connect a USB keyboard and mouse to it as extra input devices or control it from your iPad using the Freebox Connect app.

One drawcard in my opinion is that it is a fully-fledged Internet terminal with access to an app store, namely the FreeStore app store. This allows you to download games and similar “lean-back” apps; as well as view the Web or check email from your couch. Just of late, this set-top box has had YouTube support baked in to its latest firmware update.

You can now use the Freebox Player and its associated sound system or television’s speaker to play material from your iTunes software or iOS device using AirPlay. This at the moment applies to audio content only.As well, you can discover and play content held on DLNA-compliant media servers on your network including the Freebox Server’s hard disk.

Plans and Pricing

You can equip that French home or apartment with this device for € 29.90 per month. This gives you inclusive unlimited telephone telephone calls to standard phone services in most countries (Europe, Francophone countries, US, Australia, NZ, etc); and mobiles in France.

The Internet service would be up to 28Mbps while you have access to most basic TV service. Pay €1.99/month extra for 185 additional TV channels while you can service another room with Free’s TV service for €4.99/month extra with a simple set-top box or another of this Freebox Player for €9.99/month extra.

Existing Free subscribers can upgrade for €199.99 less €30 for each year they have been with Free.

The prices are obtained from Free’s latest tariff charts available on their site and would appear to be ridiculously low for people who live in a country that doesn’t have a lively competitive broadband-Internet market.

Conclusion

What I see of the Freebox Révolution is a system of equipment for a home network that is all about an Internet service provider offering a future-proof attractive cutting-edge piece of equipment rather than offering second-rate equipment to their customers.

This is primarily driven by a country who is behind a really competitive Internet service market for consumers and that the competition is driven on value rather than the cheapest price possible.

 NETGEAR Rolls Out HD Media Players, UTM and Powerline Products – SmallNetBuilder

My Comments

I have read the attached article and found that most of the devices had impressed me as devices that would work well in a home or small-business network. This was because of particular abilities that had made the devices unique rather than run-off-the-mill devices.

NeoTV network media players

NeoTV 550 network media player

This group of NeoTV network media players may be very similar to the other network media players  like WDTV Live that are appearing on the market. This is that they are capable of playing audiovisual media held on a USB memory key, camera card reader or external hard drive; or from a DLNA/UPnP-AV-compliant media server that exists on your network. But one of the models in this lineup, the NeoTV 550,  has eSATA connectivity and the ability to be a Blu-Ray Disc player when connected to an optional eSATA-connected Blu-Ray drive. This can benefit people who want to consider running this unit alongside their DVD player as a network media player but may take the plunge for Blu-Ray when they are ready.

At the moment, I am not sure whether this unit can work as a substitute DVD player if it is connected to an eSATA or USB DVD drive or a DVD is loaded in to a connected Blu-Ray drive.

HomePlug AV 802.11n access point

XAVN2001 HomePlug AV 802.11n wireless access point

One device I am pleased to see on the scene is the XAVN2001 HomePlug AV 802.11n wireless access point which work like some of the 802.11g wireless access points that can connect to a HomePlug 1.0 Turbo segment. It is also available as part of the XAVNB2001 kit which includes the Netgear XAV2001 HomePlug AV-Ethernet bridge as well as this access point. Like these other access points, this unit plugs in to the wall and works as a bridge between an Ethernet segment and a HomePlug AV powerline segment as well as being an access point for a 2.4GHz 802.11n wireless network.

This device can work as a way of extending the effective radio footprint of an 802.11n wireless network with the use of an Ethernet or HomePlug AV wired backbone. On the other hand, it could bring an 802.11n wireless network and Ethernet network point in to an outbuilding or static caravan (trailer) in the manner talked about in my feature article “Multi-Building Home Networks”.

Quick extension-access-point setup with WPS

I had done further research about this access point through Netgear’s Web site and found that this unit uses WPS as a way of simplifying the creation of a multiple-access-point wireless-network segment. This kind of segment, also known as an “extended service set” makes use of multiple access points with the same SSID, network operating mode and security parameters so a portable device can move between access points with minimal user intervention. I have written a bit about the concept of using WPS as a way of simplifying setup of a small multi-access-point wireless network in an article I had posted last year on this site at its old location and had moved to the current location.

The user just has to hold down the unit’s ON-OFF button for a few seconds then press the WPS button on the WPS-ready wireless “edge” router to start the configuration routine. A few moments later, they are then able to move the access point to the area where the Wi-Fi network is needed and proceed to connect this access point to the Ethernet or HomePlug AV backbone which the wireless router should be connected to.

Conclusion

If more manufacturers can look towards making affordable and easy-to-use network devices, they can end up with equipment that will appeal to most users and have equipment that is out of the ordinary.

In most countries, there is interest in setting up most of the densely-populated areas for a form of next-generation broadband Internet service. This will typically provide at least 10Mbps, if not 30Mbps or 100Mbps which will be more than double what your typical ADSL or cable broadband service will provide.

Key features that are being promoted alongside these services include the reliable streaming or downloading of high-definition TV content to many TV sets in the house as well as VoIP telephony, which will include FM-grade telephone conversations or reliable videophone conversations that are beyond the realm of science fiction. The VoIP telephony features will also work alongside remote-terminal setups and other telepresence setups to allow knowledge workers and management workers to work from home, thus eliminating the need to travel in order to commute to work.

One main issue that may affect your home network is making sure it is ready for the next-generation broadband service. This is by preparing the infrastructure for high-bandwidth data throughput and setting up a router that can work with the next-generation broadband technologies like VDSL2 or fibre-to-the-premises.

Upgrading your router to next-generation broadband

The next-generation broadband service will use different connection methods to what you are using now. This will either be fibre-to-the-home or VDSL2 via phone lines and will require a different kind of modem. In some cases, this modem may be provided by your “next-generation” Internet service provider as part of the deal or at extra cost. Some of these service providers may sell a broadhand router that has an integrated modem for the broadband connection as well as router functionality. There is also an increased likelihood for these devices to support VoIP analogue-telephony-adaptor functionality because these services will also be about VoIP telephony.

If you have an ADSL modem router, its ADSL functions will become redundant under this environment unless it has an Ethernet WAN (broadband) connection option. This function may be available in a few recently-issued high-end units either as an Ethernet socket that can be configured to be a LAN socket or WAN (Internet) socket; or as a dedicated Ethernet WAN socket.

When you buy your next Internet router for this technology, the WAN (Internet) side of the router should offer a Gigabit Ethernet connection so you can use it with fibre-to-the-premises setups where you have an “optical-network terminal” modem; fibre-to-the-curb or fibre-to-the-building setups that use Ethernet-to-the-customer copper-cable runs or other connection methods that use a Gigabit Ethernet socket. It may be worth keeping your eyes peeled for “dual-mode” DSL modem routers that work with ADSL setups or VDSL2 “next-generation” setups when you upgrade your ADSL router.

It also may be worth looking towards upgrading to a router which has 802.11n wireless and Gigabit Ethernet for LAN connectivity.  Preferably, the 802.11n wireless network should be a dual-band setup but it doesn’t have to be a dual-radio (simultaneous dual-band) setup, as I will explain later. This will allow for higher bandwidth that the next-generation broadband Internet applications will need.

As well, you may have to pay attention to how the router handles “quality-of-service” with VoIP and multimedia traffic. It is because this kind of traffic will become more prevalent on these high-bandwidth networks and other Internet use like checking on email, viewing Web sites or “download-to-disk” applications doesn’t impair the experience you have during a phone call or when you watch streamed Internet TV.

Your home network

Here, I am talking about upgrading your home or small-business local network to cope with the increased bandwidth that next-generation broadband will provide. This setup is based around the use of a Cat5 wired Ethernet segment that you may have implemented or may want to implement as part of a renovation job; a Wi-Fi wireless segment used primarily for laptops, smartphones and similar portable devices and a HomePlug powerline segment that you may use as a temporary or semi-permanent “no-new-wires” network segment.

The Cat5 Ethernet segment

If you have wired your home for Ethernet and used a regular Ethernet switch as the network’s “central” switch, now is the time to upgrade it to a Gigabit Ethernet switch. This will provide a high-speed path to devices that have Gigabit Ethernet connectivity and can provide “next-generation” speeds in to the home network. The old 10/100 switch can work well as a “spur” switch for a cluster of devices that don’t have Gigabit Ethernet connectivity.

Again, it may be worth looking for a switch that also supports “quality-of’-service” when you upgrade the existing unit. This is even though most of the Ethernet switches that support this are more expensive and require you to visit a Web interface to “fiddle with knobs” to achieve this goal because they are targeted at business users who have their network and Internet managed by dedicated staff or contractors. This may be rectified over the coming years with the implementation of “logo-mandatory” specifications and standards for seamless QoS management.

If you are working on building new premises, considering renovations on your existing premises or are even just planning to rewire your existing premises to current safety expectations, now is the time to consider wiring it for Ethernet. I have written a good article on this topic in the context of new renovations, extensions or rewiring projects. At least make sure you place an Ethernet socket near every TV-antenna (aerial) socket in the house so you can cater for IPTV which will be part of the next-generation broadband environment.

The Wi—Fi wireless segment

As part of the upgrade, a wise step would be to implement 802.11n Wi-Fi in your wireless-network segment. As I have explained in the article “Understanding 802.11n High-Bandwidth Wireless Networking”, there are different varieties of access points and routers for this technology.

One way to go about this while maintaining your regular 802.11g equipment would be to set up another extended-service set with a 5.4GHz single-band access point or a dual-band router set up on 5.4GHz. The existing 802.11g router could be put in to service as an access point running the existing extended-service set. You then focus computer equipment that is equipped with dual-band 802.11n Wi-Fi interfaces to the 5.4GHz 802.11n segment while equipment like smartphones, netbooks and Internet radios work on the 2.4GHz 802.11g network. The WPA security key can be the same for both Wi-Fi segments and you could have one SSID being described as <PRIMARY-SSID-54g> for the 5.4GHz segment and <PRIMARY-SSID> for the 2.4GHz 802.11g segment.

As well, the Wi-Fi equipment should support or implement WMM (Wireless Multimedia) quality-of-service “out-of-the-box” but most current equipment doesn’t support it. This is again due to uncoordinated quality-of-service signalling and quality-of-service not becoming a “logo-mandatory” requirement.

The HomePlug powerline segment

This network segment may need to be reviewed if it is going to be the primary wired carrier for all of the multimedia data that next-generation broadband Internet will deliver. This is more so if you are using a HomePlug link to provide content to a DLNA-compliant network-enabled TV set or IPTV set-top box.

Here, you would need to use a HomePlug AV segment for any multimedia applications, a temporary building-building link or as a “no-new-wires” wired backbone between access points in a multi-access-point 802.11n wireless network. This can coexist with your existing HomePlug 1.0 Turbo segment which can be used for applications like connecting Ethernet-enabled network printers to the network or maintaining a backbone for a multi-access-point 802.11g wireless network. As far as any HomePlug AV-Ethernet bridges go, you should prefer those units that have Gigabit Ethernet so as to provide proper throughput to the equipment.

The up-and-coming HomePlug AV2 standard, which allows for higher throughput, MIMO-based operation and each HomePlug AV2 device being a repeater, can allow HomePlug AV devices to become part of that segment.

Purchasing subsequent computer equipment

Any desktop or all-in-one computers or network-attached-storage equipment that you subsequently buy should support a Gigabit Ethernet connection. This issue may not be of concern if you buy relatively-new equipment but can be of concern with older secondhand desktop computers. These can be upgraded through the installation of a Gigabit Ethernet PCI or PCI-Express card in these computers, which requires at the most a small Phillips-head screwdriver to complete.

When you buy Wi-Fi-enabled equipment like laptop computers, you may need to look for equipment that has 802.11n technology. This may be a limitation if you intend to buy a secondary-use laptop or netbook which may not have this functionality or buy smartphones, Internet radios or similar devices that have integrated Wi-Fi functionality because most such devices stick to 802.11g technology to keep costs down or allow longer run-times when run on batteries. This could be worked around through the creation of a “compatibility-mode” 802.11n extended-service-set on the 2.4GHz band or establishment of an 802.11g extended-service-set with its own SSID for these devices to use.

The situation will be likely to change from this year onwards because of work being undertaken to build small-footprint low-power-requirement 802.11g/n chipsets that are optimised for battery-operated devices and manufacturers being interested in implementing the technology in their devices.

Conclusion

Once you know how to have your network ready for next-generation broadband by replacing devices that may slow down the data throughput, you are then able to take advantage of what this new technology offers.

Introduction

Now that the 802.11n high-bandwidth wireless-network standard has been declared a final standard, the price of 802.11n-compatible wireless-network hardware will come down to more affordable levels. This will lead to you considering upgrading your wireless network to 802.11n whenever the time is right to renew your home-network IT hardware.

The 802.11n access point

This works in a different manner to the 802.11a/b/g access points we are so used to. Basically, these units use a “multiple in, multiple out” methodology with “front-end diversity”. They will typically have two or three aerials with each aerial serving a particular transceiver. Some units may have an aerial serving a receiver as well as the two aerials serving two transceivers. It is totally different from “antenna diversity” which is used on most 802.11b/g routers and access points, where one transceiver works with two aerials, choosing whichever has the best signal strength.

These access points and the network client devices that connect to them also make use of “constructive multipath” to improve their quality of reception.This is different from the “destructive multipath” often experienced with FM radio and analogue television. Here, signals picked up as reflected signals are mixed with signals received by line-of-sight and “worked out” as a data stream.

The premium-priced 802.11n access points will be typically dual-band in which they can work on the existing 2.4GHz band or the newer 5GHz band. Some of this equipment may be able to work on both bands, as though there are two access points in one box.

Access Point Types

Single Band

These access points use a single access point that is set up to work on one band, typically 2.4GHz, but some of them work on 5GHz as an “add-on” access point.

Dual Band, Single Radio

These access points are like a single-band access point but can be set by the user to work on either 2.4GHz or 5GHz, but not both of the bands.

Dual Band, Dual Radio

These access points, sometimes described as “simultaneous dual-band”, are effectively two 802.11n access points in one box with one working on 2.4GHz and the other working on 5GHz.

Access Point Operating Modes

Primary Operating Modes

A typical 802.11n access point can be configured to work in one of two primary operating modes – a “compatibility” mode or an “N-only” mode.

Compatibility Mode

This mode, known as Mixed Mode or G-compatible mode allows 802.11g wireless network hardware to work from the same access point alongside 802.11n equipment. The limitation with this mode is that the wireless network works to a “worst-case” scenario with throughput that doesn’t hit the standards for an 802.11n segment. You will still have the larger coverage and service reliability with the 802.11n equipment and this benefit may pass through to 802.11g equipment

N-only Mode

This mode allows the access point to work only with 802.11n equipment and gives the equipment full wireless throughput as well as the full reliability of the standard.

Wideband vs Standard Channels

802.11n access points can run their channels as either “standard” 20MHz channels or 40MHz wideband channels which can yield higher throughput. The wideband channels also make use of a “standard” channel as a “base” channel for the double-width channel.

The preferred method of operation is that a 2.4GHz access point works on “standard” channels and most such access points will be set to have this kind of behaviour by default. But you can run these access points on the wideband channels with the limitation of poorer compatibility with 802.11g devices. If you are running a 2,4GHz access point in a manner to be compatible with regular 802.11g devices, it would be a good idea to stick to “standard” channels. If you are running 5GHz access points, you can get away with using the wideband channels and I would prefer setting up a 5GHz 802.11n extended-service-set to work this way.

The number of streams a device can handle

An 802.11n wireless device will typically be rated as being a single-stream, dual-stream or multiple-stream device. This relates to how many streams of data the wireless device can handle. All Wireless-N (802.11n) access points and routers will typically be either a dual-stream type or a multiple-stream type in the case of premium devices. Similarly, laptops with integrated Wireless-N capability; and add-on Wireless-N products will typically be dual-stream devices.

The main class of devices that will handle only one stream will be primarily-battery-powered devices like smartphones, WiFi VoIP phones, and WiFi-enabled digital cameras / portable media players because the single-stream ability won’t be intensive on these devices’ internal battery resources. Similarly, the idea of a single-stream Wireless-N network interface will also appeal to applications where size or cost do matter.

Other points to know

Best practice with dual-band equipment

If you are running dual-band equipment, especially dual-band dual-radio equipment, it would be a good idea to use the 5GHz band as N-only mode, while 2.4GHz works as compatibility mode. If you are running dual-band single-radio equipment, you will need to use older 2.4GHz equipment to run an 802.11g service set with the dual-band single-radio equipment on 5GHz N-only mode.

Use of aftermarket antennas

You can use external aftermarket antennas (aerials) with 802.11n equipment as long as all of the antennas are of the same type. This may work well if you replace the omnidirectional whip aerials with stronger omnidirectional ones. Then you may have to space the aerials further apart for the front-end diversity to work properly The main difficulty you will have is using directional aerials, in which case you may need to look for directional aerials optimised for 802.11n setups.

As well, if you are running dual-band dual-radio equipment, you will have to use antennas that can work on the 2.4GHz and 5GHz bands rather than antennas optimised for the 2.4GHz bands.

Shaping your 802.11n wireless network – the ideal upgrade path for your wireless network

I will be talking of WiFi networks that work on a particular technology and with a unique SSID and security parameter set as an “extended-service-set”. This allows me to cover setups where there are multiple access points working with a particular configuration.

You may be tempted to construct a multiple-access-point extended-service-set with an 802.11g access point and an 802.11n access point working in “compatibility mode” connected by an Ethernet or HomePlug wired backbone. The simple answer is "don’t”. You will end up with your wireless network having reliability problems especially as devices roam between the different access points and switch operating modes.

The simple answer would be to run different extended-service-sets with at least one access point for each WiFi technology. They are set up with different ESSIDs (such as SSID for the G cloud and SSID-N for the N cloud) with the wireless stations choosing between the different ESSIDs. The only thing they can have that is common is the WPA security parameters, and a common wired backbone which can be Gigabit Ethernet or HomePlug AV.

This could be achieved through deploying an existing 802.11g router that is set up as an access point and working on “SSID-G” and one channel while a newer 802.11n router working as the Internet “edge” is set to “N-only: or “compatibility” mode in the case of a single-band 2.4GHz unit, and set to “SSID-N” and a different channel.

As you evolve your wireless network, you may want to work towards establishing a 2.4GHz 802.11n “compatibility-mode” extended-service-set and a 5GHz N-only extended-service-set. You then upgrade your portable computers to work with dual-band 802.11n network interfaces or add dual-band 802.11n network adaptors to your existing equipment. The 5GHz extended-service-set will come in handy for high-throughput activity like video streaming and related applications while the 2.4GHz extended service set can work well with voice applications, smartphones, Internet radio and similar applications where throughput doesn’t matter.

If you are upgrading a wireless hotspot to 802.11n, it would be preferable to make sure your hotspot’s extended-service-set is on the 2.4GHz band and operating in “compatibility” mode so that customers can still use their existing 802.11g hardware on the wireless hotspot.

Some issues may occur with dual-band networks where the 5GHz extended-service-set may not cover the same area as the 2.4GHz extended-service-set. This is because the 5GHz band is of a higher frequency and shorter wavelength than the 2.4GHz band and is best demonstrated by AM radio stations being receivable at a longer distance compared to FM radio stations. It can be rectified by deploying a dual-band single-radio access point working on the 5GHz band in to the 5GHz extended-service-set as an infill access point.

Conclusion

Once you understand the 802.11n wireless standard and what it can and cannot do, you can make sure that you get the best out of the new standard while gaining the maximum mileage out of the existing wireless-network hardware.

IEEE finally approves 802.11n | The Register (UK)

802.11n: Ratified at last | Wi-Fi Planet

IEEE Ratifies 802.11n | WiFi Networking News

The Fine Points of Optional Wi-Fi 802.11n Certification | Wi-Fi Networking News

My Comments On This Evolution Of The Standard

Ever since 802.11n came about as a wireless standard, the equipment that was working to the standard was working to a draft version of the standard. This may have been acceptable for networks which weren’t critical to a business’s operations, because of the doubt associated with last-minute changes that could affect hardware compatibility. In some cases, this could also mean that an 802.11n segment may not work properly unless the equipment was based on the same chipset.

Now that the standard is final, enterprises can become confident about deploying 802.11n wireless network segments with cost-effective heterogenous equipment setups. As well, the cost of establishing an 802.11n wireless-network segment will reduce now that manufacturers can confidently sell more equipment at varying price ranges.

Existing 802.11n draft-standard segments

But what does this mean for networks based around existing 802.11n draft-standard hardware? Could they work properly with final-standard hardware with as much as draft-standard hardware being “flashed” to final-standard specifications. The compatibility issue raised in this question has been through the new revisions being declared optional rather than mandatory.

Support for single-stream 802.11n devices

The most popular benefit of the new standard would be the ability to support single-stream 802.11n station devices. This concept allows a device to have one transceiver rather than the two or three that is part of the standard. It is mainly brought about because of a need to have battery-operated devices like smartphones and VoIP WiFi handsets as part of the 802.11n wireless network and the single-stream 802.11n network adaptors can fulfil this need without draining the device’s battery too quickly.

The access points can provide full bandwidth to these single-stream devices without forfeiting bandwidth to other devices simply through the use of one dedicated stream for each of the devices. It then may be like providing the wireless equivalent of a “switched” Ethernet connection or ADSL-based broadband connection to this class of devices.

This factor has been improved with the ability for access points to be tested for three streams. This may allow for access points and routers to be differentiated on wireless-network performance levels as well as functionality levels.

Conclusion

The goal has been achieved for 802.11n to be a real wireless-network standard that complements the high-throughput Internet services and the multimedia networks of today.