Tag: Blu-Ray player

Article – From the horse’s mouth

Arcam

Product Page – Solo Music and Movie range

My Comments

Arcam Solo Neo CD receiver

At the Australian Audio and AV Show 2013, I had a look at Arcam’s Solo Neo network CD receiver which is their entry to the high-quality network CD receiver marketplace. But I subsequently had a look for information on the Web about whether the Solo Neo still existed or was superseded by a better unit.

The Arcam Solo Neo was, at that time, the latest in their Solo range of CD receivers and DVD receivers that this British hi-fi name had designed. Then, it was on a par with the likes of the Cyrus Lyric and the Naim Uniti 2 which were systems of this calibre that were being offered by hi-fi’s “names-of-respect” to answer the needs associated with compact high-quality music systems that are simple to operate.

Arcam Solo Music – latest iteration of the Solo network CD receiver lineup

But I had found that they replaced the Solo Neo with a range of network-capable receivers that also had an integral optical-disc player. Here, they offer the Solo Music which has a stereo output and an SACD player which plays ordinary CDs as well which is to be seen as a follow-on to the Solo Neo. But Arcam also offers the Solo Movie 2.1 which has a Blu-Ray player along with support for a subwoofer for deeper bass along with the Solo Movie 5.1 which has the Blu-Ray player and supports a full surround-sound output through its own amplifier.

What are these Solo Music and the Solo Movie network-capable AV systems about?

Arcam of Cambridge: Solo Movie system incorporate the latest technology and components from Arcam’s 2016 AVR & Hi-Fi ranges, including the acclaimed Class G amplification, High-End Blu-ray and DVD Replay and full App Controlled music networking / streaming. Either available as a 5.1 full-surround variant or as a 2.1 two-speaker variant

All three of these units require you to supply your own speakers rather than being supplied with a pair of speakers as is common for this breed of equipment. Here, the Solo Music and Solo Movie 2.1 could put up 80 watts per channel RMS across a standard 8-ohm speaker load with 0.2% total harmonic distortion while the Solo Movie 5.1 could handle 60 watts per channel RMS with all channels driven into standard 8-ohm speakers, again with 0.2% total harmonic distortion. Here, these systems could handle most modestly-sized speakers that are in existence, thanks to Arcam’s “Class G” amplification technology which combines the sound quality associated with the Class A linear amplification method and the efficiency of the Class AB linear amplification method, serving as another way to achieve high-quality sound from compact equipment designs.

They all have four HDMI inputs for video peripherals along with an HDMI output for your TV with the ability to feed your TV’s sound through these systems courtesy of HDMI-ARC functionality. There are also SP/DIF digital inputs, one as an optical form and another as a coaxial form for other digital-audio devices like MiniDisc decks. Then there are two line-level inputs, one in the form of RCA connections and the other in the form of a 3.5mm stereo phone jack for connecting up other line-level audio devices.

As well as the aforementioned optical disc drives (SACD in the case of the Solo Music and Blu-Ray in the case of the Solo Movie models), there is a radio capable of receiving FM or DAB+ broadcasts along with the ability to play audio and visual media held on your NAS or other network media resource thanks to DLNA technology. It can also play file-based content that exists on a USB storage device like a memory key as well as being able to stream audio content from your Bluetooth-capable smartphone but using aptX for improved sound quality.

You can connect these Solo music and AV systems to your home network using Wi-Fi or Ethernet (including via a HomePlug powerline network segment). But I would prefer that this kind of equipment is connected to your home network using Ethernet or a HomePlug AV connection to allow for reliable home-network operation.

Why am I giving space to the Arcam Solo Music and Solo Movie systems?

The Arcam Solo Music matches its network-CD-receiver peers in so much that it can be the heart of a high-quality three-piece music system for your apartment, dorm or other similarly-compact living space. Here, you can choose to run it with a pair of high-quality speakers, with the fact that these could be a pair of brand-new bookshelf speakers, the traded-in floor/shelf speakers that the hi-fi store you bought the Solo Music from are clearing out or the pair of good-quality speakers you ended up with at the estate sale.

But the Solo Movie network Blu-Ray receivers take this further by integrating the concept of a network CD receiver with that of those DVD and Blu-Ray home-theatre systems that a lot of people in the suburbs are enamoured with. Unlike the typical “home-theatre” system offered at Best Buy, Harvey Norman and the like which are only supplied with small speakers for the front and surround channels and are engineered so that the subwoofer does all of the work in handling the bass, the Solo Movie units can be connected to bookshelf or floorstanding speakers that can reproduce the bass notes very adequately.

The Solo Movie 2.1 even impressed me more for people who want something with just two speakers but able to do video playback rather than being the full-bore surround system. Examples of this include a system used in a secondary lounge area, office or bedroom; or by those of us who are just satisfied enough with the two speakers for reproducing our video content’s soundtracks. You could even connect your computer through the Solo Movie 2.1’s HDMI connections so that the sound from YouTube and other online audio sources could be piped through the better speakers connected to that unit rather than your laptop’s or monitor’s tinny speakers.

Hotels and the like would even value this system as something to be installed in a guestroom, suite or apartment to provide the ability to play optical discs, network-hosted sources, the radio or smartphones and similar devices that a guest brings along; along with the TV’s sound through better speakers.

Arcam could provide inherent support for online audio sources like vTuner Internet radio, Spotify and Pandora and this can easily be provided using a firmware upgrade that effectively adds these sources.

But what they are doing is to use the Solo product lineup as their way of providing integrated audio and video systems that are about high-quality sound and vision in a manner that appeals to those of us who are more comfortable with this kind of product. They can also encourage others who offer the network-enabled CD receiver in their product lineup to look towards offering similar simplified products that can fulfil video-playback needs.

Any of the flat-screen TVs on the market including the 4K models can serve as electronic signage

One use you can put flat-panel displays (including TVs) and projectors to is as an electronic signboard for your business or organisation. This can be alongside a computer that you set aside for that task or a having the display itself or a video peripheral like a Blu-Ray player do the task of showing the signage.

Here, you can use common computer software to create the signage that you can keep revised and updated as your needs change and either show them using this software or create JPEG files of the signage to show using your display or video peripheral.

Create the signage material

Microsoft PowerPoint – useful for creating electronic signage

Use a presentation program like Microsoft PowerPoint, OpenOffice Impress or Apple Keynote to create your slides. Here, make sure you have the page layout set up for a 4:3, 16:9 or 16:10 screen when you set up your presentation with the aspect ration dependent on what most of your equipment can work with natively.

Sometimes, you may find that the DL paper size may be able to provide that “wide expansive look” for your signage on a 4:3 or 16:9 display. Other layout sizes that can also work include the “business-card” size or the classic 3:2 layout associated with still images taken on 35mm film.

Some of you may base your signage on other printable collateral that you have created like handbills, flyers or business cards. The best formats for the collateral that you want to use would be most of the common paper sizes with the document set in landscape format. In this case, you simply make a high-resolution JPEG or PNG bitmap from the PDF master file for the printed collateral.

You may decide to implement animation in your signage using the presentation program if it supports that feature but the program must be able to export these signs as a video file that most devices can understand. Here, you may want a particular sign to have an animated effect for the duration of that message, including an effect that happens when it appears and another when it disappears.

If you are using an electronic picture frame or a tablet purposed as one and you have this set up in a vertical (portrait) manner, you may find that you could use a vertical page layout here.

How should it look

You may find that your electronic signage may work really well if you use bright features like text or graphics set against a darker background. This will effectively make the text and graphics “pop” against the background and is also more flexible for use with video projectors.

As well the text is best set up using sans-serif fonts like the Helvetica or Comic Sans font families rather than serif fonts like the Times Roman or Courier font families. This is more so where you are using a projector or a large display that is likely to be viewed at a distance. Here, such text becomes easier to read from a distance. But you can make use of mixed-case lettering to make best use of the space as well as allowing for improved legibility.

Learn from example

These presentations can be a good example of what you can do for electronic signage

If you are looking for good examples to work from, pay attention to some of the work others have done in this field, especially if this is your first effort at visual merchandising.

For example, look at the slides that are shown before the main film when you are watching a movie at the cinema, or the slides shown at business presentations during any conference or expo you attend. Similarly, when you are loafing on that couch watching TV, look at the announcement or advisory slides that are shown before or after the TV shows or any of the menus and warning notices shown before DVD or Blu-Ray video content.

Here, you observe things like text pitch and layout along with how the text and other highlights look against the background. Similarly, it may be worth noticing different colour combinations that are used in this material.

Export your slides to high-resolution picture or video files

PDF2PNG or PDF2JPG can come in handy for creating bitmap images of your electronic-signage PDFs

Once you have finished with creating your masterpiece slides and you are satisfied with them, export a PDF copy of the presentation. Then you use a PDF-to-JPEG export site to export your PDF-based presentation to high-resolution JPEG files that work with most TV screens. I have highlighted this process in my article and SlideShare presentation about how you can create better high-resolution JPEG output form PowerPoint.

This process is important if you aren’t using the same or compatible presentation tool to show the electronic signage or are using consumer-electronics devices as the display tools.

If you create a highly-animated screenshow using your presentation tool, export it as an MP4 (H.264) or other common video file which your displays will support. Here, you don’t have to add any sound to the file because this will come alive with just the vision. If you have to convert the animation file, you may find that most video-editing or video-conversion utilities can do this job very adequately. Here, you may find that you could make video files for each slide rather than for the whole presentation so as to allow for devices to randomly show the slides or to allow a mix of animated and still signage.

Showing them on the screen

Using your network and UPnP AV / DLNA technologies

DLNA content collections listed as sources on a Samsung Smart TV

If you have a NAS or file server that is running DLNA media server software, (most of these would be), you can use UPnP AV / DLNA as a way to show the electronic signage. Here, you use a TV that has DLNA functionality integrated in it like most, if not all, of the smart TVs; or have a TV, monitor or projector connected to a DLNA-capable video peripheral like a Blu-Ray player, network media player or games console.

Here, you use the remote control on the TV or video peripheral to “pull up” the images that are in a folder shared by the server device’s media-server software. Or an increasing number of devices can respond to DLNA-standard media-controller software like the “Play To”/ “Cast To Device” function offered in Microsoft Windows operating systems since Windows 7, allowing you to “throw” the pictures up on the screen using your regular computer or mobile device.

Pioneer BDP-160 DLNA-capable Blu-Ray player – can enable a cheap flat-screen TV, monitor or projector to be used for electronic signage

But you have to have all of the “signage” slides in a folder that is accessible to and shared by the DLNA media server software. On some NAS units, you may be able to add an option for a shared-folder tree anywhere on the NAS to be indexed and shared by the DLNA media server; or you may be required to keep your media content under a certain shared-folder tree. Then you maintain sub-folders that relate to particular occasions or campaigns and put the relevant electronic-signage JPEG files there.

Removable Media

Just about all flat-screen TVs could work with USB memory keys to show electronic-signage images

Most of the large-screen TVs, Blu-Ray or DVD players, network media players or similar devices are providing the ability to show still images held on a USB memory key or SD card. Similarly, you could burn a CD or DVD full of digital images and show these on most, if not all, recent-issue DVD and Blu-Ray players  As well, an increasing number of the portable video projectors are even offering as a differentiating feature the ability to allow you to show pictures or videos from a USB memory key or SD card.

Here, you can upload a campaign’s worth of images to a USB memory key and plug it directly in to your display device or video peripheral. To the same extent, you could put these images on an optical disc and show them using most recent DVD and Blu-Ray players.

Using removable media works best if you are working with one or two display devices to show your signage material. Similarly, it can work very well if you are not likely to change the material very frequently.

You may also find that some of these display devices or video peripherals will run the images at the sharpest resolution that the display can support. Here, the playout hardware integrated in the display is working directly with the display rather than at an “agreed” resolution.

A computer connected to a large display

Desktop or laptop computers when used with external displays can earn their keep for electronic signage

Some of you may customarily hook up a computer to a large display like a projector and will want to use it for showing the electronic signage. It would be of importance for churches and other houses of worship where a computer is used to show worship material; or cinemas and theatres where a computer is used to show the program material.

Here, you could use a presentation program to do the job especially if you used the same presentation program or a compatible piece of software to create those slides; or just get by with a photo-viewing or media-playout tool like even Windows Photo Viewer to do this job without installing extra software. I have written up some instructions on how to press this program in to service with a larger display when you have a dual-display setup like a laptop connected to a large screen or a desktop with a monitor and a projector for showing to the audience.

Sometimes you may find that the one presentation tool doesn’t answer all of your needs with your computer or some of these tasks may be difficult to perform with that tool. For example, you, as a church AV manager, may find that a worship-lyrics program of the EasiSlides ilk can cut it just fine for the song lyrics that are part of your worship service while a program like Windows Photo Viewer can cut it for showing many JPEG images. On the other hand, you may come across that presentation tool that can satisfy main-program applications as well as the electronic signage applications.

An iPad or similar tablet

One of these tablets could work as counter-top electronic signage

Most tablets have a screenshow application but you would have to upload the signage in to the tablet whether via Dropbox or similar cloud storage; connecting the tablet to your computer to transfer the files; or plugging in a microSD card or USB thumbdrive in to an Android tablet that supports USB OTG or removable media. You may also find that a DLNA media client running on your tablet can also fulfil this task effectively if your tablet and NAS are part of the same network.

It can be taken further with an Apple TV or Google Chromecast device that purposes your TV screen as the external screen for your tablet. Similarly, running a DLNA media-controller client on that tablet to “throw” the signage to DLNA MediaRender-capable devices like Smart TVs could answer your needs. But these situations may not allow you to use the tablet’s screen and the external screen simultaneously.

These would work well when you want to have this signage on a bar or reception desk for your visitors to see up close.

Conclusion

Once you know how to use your favourite presentation program to create electronic signage and that you can use cost-effective equipment to display it, you can then have a digital display that you can always have updated regularly with new information.

Article

Bilan: la Freebox Révolution a quatre ans | Freenews (French language / Langue Française)

Freebox Révolution – 4 years old (à quatre ans)

My Comments

As a consequence of the highly-competitive triple-play communications service market in France, Free had developed one of the “n-boxes” that has a lot more that is expected for this class of carrier-supplied equipment. Now this device, known as the Freebox Révolution, which is available in just about all of France for EUR€29.95 a month as part of a very tasty triple-play pack, has reached its fourth anniversary.

I have given a fair bit of editorial space to the Freebox Révolution including citing it as an example device in an article about setting up for Internet in France. This is due, not just to its exciting Philippe Starck design but due to the increasing amount of functionality that this device has come with and received over the four years. Here, Free kept with a program of frequent firmware updates which weren’t just about fixing up technical problems but were also about adding functionality to these devices, some of which I have drawn attention to on HomeNetworking01.info.

The Freebox Server was more than just a VoIP gateway with DECT base-station and wireless broadband router. Here, it had DSL and fibre support on the WAN side of the equation and a 250Gb NAS. There was even the ability for the unit to be a media player for Apple AirPlay, DLNA or online media, including playing audio content out via integrated speakers or through external active speakers. The LAN side had a four-port Gigabit Ethernet switch along with 2.4Ghz three-stream 802.11n Wi-Fi, but the Freebox Révolution comes with power-supply units that have integrated HomePlug AV-Ethernet bridges. The newer iterations had been upgraded to HomePlug AV500 and the Wi-Fi on newer releases was upgraded to a dual-band dual-radio variety. Let’s not forget that some of the newer variants even came with a Femtocell that provided local mobile-phone coverage for your home as part of Free getting their paws in to a mobile-telephony service.

Firmware upgrades even had the Freebox Server acquire full Apple compatibility along with being a VPN endpoint router and one of these upgrades was fashioned as the “Freebox OS” with an interface very similar to a newer Linux distribution, one of the mobile-platform operating systems or something you would get with one of the newer high-end NAS devices. The server functionalities included UPnP AV / DLNA, Apple Time Machine, iTunes Server and a BitTorrent server, known as a “seedbox”.

The Freebox Player which served as the “décodeur” for the IP-based TV component of the triple-play service was infact a “full-blown” 3D Blu-Ray player, games console and digital-TV tuner. The gaming functionality was part of an app-store that Free operated, which was to the same standard as most smart-TV platforms, if not better. This device was also controlled by a “gyroscopic” remote control which communicated to it via Zigbee RF technology and supported “gesture-driven” operation. Lets not forget that this was a DLNA-capable media player which gained MediaRenderer functionality from a subsequent firmware upgrade. This device also served as an Internet terminal for the TV screen and even had the ability to interact with most online services courtesy of either the Web view or a native-interface “front-end” that came with one of the firmware upgrades or downloaded from the app store. There was a firmware update that give the Freebox Player “Shazam-like” song-identification abilities.

The Freebox Révolution raised the bar when it came to the concept of a premium triple-play “n-box” offer with the competitors offering systems that had very similar functionality and aesthetics. Examples of these include Numéricable’s La Box and the Neufbox Évolution. As well, I had a casual conversation with someone who came out from France and they even mentioned about someone they knew having one of these devices and being impressed with what it could do.

For me, I have viewed the Freebox Révolution as the flag-carrier for the competitive French Internet market because of the way the carriers can add more value to the equipment they supply their customers. In this way, I would place this device alongside the TGV or the Channel Tunnel as a symbol of French technological progress.

Happy Birthday, Bonne Anniversaire, Freebox Révolution!

Another major trend that has come about over the past five years is increasing interest in “connected entertainment”. This has been augmented with the role of smartphones, tablets and computers having access to online content services, typically through natively-coded client-side apps.

But it is also about a surge in the availability of traditional devices that are associated with entertainment being connected to the home network and drawing down online content from various sources.

Network-capable entertainment devices

Increasingly we are purchasing network-capable entertainment devices that are fit for use in the main living or family areas of our homes.

Panasonic VIERA AX900 Series 4K UHDTV

Firstly, most TV manufacturers are supplying “smart TVs” that have network connectivity and access to online content services. Typically the manufacturers, primarily the “big-name” companies are offering this towards mid-range and premium models in their product lineups. This feature is also being extended to Blu-Ray players, “home-theatre-in-box” systems and the like so you can add this feature to existing TV sets which is important as TV sets last a long time and are capable of being “pushed down” to secondary viewing areas. It is also a key feature for any of the newer 4K “ultra-high-definition” TVs that show images that are sharper than the regular Full HD TVs on the market.

Cyrus Lyric CD receiver – a network-capable stereo system

Similarly, network-capable music-playback devices are reaching standards that befit high-quality music reproduction. Here, these devices are either as “wireless speakers”, integrated music systems or hi-fi components that can be connected to existing hi-fi systems.

Denon HEOS wireless speakers

The “wireless speakers” are single-piece tabletop speaker systems that connect to the home network in a manner similar to what Sonos envisaged with their products. Here, you can have a group of these speakers that are connected to the same network play the same audio content without them being out of sync. Most of the setups may work in a “party-mode” setup where they play the same content whereas an increasing number of these speakers can allow you to set two like units up as a wirelessly-linked stereo pair for increased stereo separation or wirelessly link a subwoofer to the speaker to provide some extra bass. A trend that could easily come about is to have a wirelessly-linked multiple-speaker setup for surround sound, which could make this concept more appealing because of the absence of wires.

At the moment, Wi-Fi-based multiroom wireless speakers will work with other speakers that implement the same technology, typically by having the same or compatible chipsets. This is because no standard has been defined for these kind of speaker setups.

WD MyCloud EX Series NAS units able to benefit from the 6Tb WD Red

Another device that is being considered highly important for the “connected entertainment” world and is something that every home network will have to have is the network-attached storage appliance. These devices work as “always-on” media servers that can provide audio, image and video content and most, if not all of them implement UPnP AV / DLNA and iTunes / DAAP media-server functionality to do this on a level playing field. This means that you don’t need to run a desktop computer all the time to make the latest photos or the music you ripped from your CDs or downloaded from iTunes or similar services available to your smart TV or your network-connected stereo equipment.

Online Content Services

Internet Radio

Previously, online content services were typically Internet radio services which offered global access to Internet-hosted simulcasts from various broadcast radio stations and networks. I saw this as the “new shortwave” because you could hear a radio station that is local to a particular city or town through this setup and these have been facilitatied by a few Internet-radio directories like TuneIn Radio and vTuner.

Now we have seen the arrival of the “global jukebox” in the form of music-streaming services like Spotify, Deezer and Pandora. These services allow you to legally stream an album, song or playlist via the Internet and work either for free with advertising or for a modest monthly charge. They are becoming a way to, for example, sample music you are interested in or even just listen to music for a modest cost or for free.

Spotify, one of the most popular online music-streaming services

For music, the buy-to-download business model still exists courtesy of the likes of iTunes, Google Play, Amazon or most other online stores. There are some label-direct music stores that offer music on a “buy-to-download” basis. Most of these services offer the music as CD-quality 320kbps MP3 or 256kbps AAC files for each album track but some are offering them as master-quality FLAC or similar files. As well, most of these tracks are being made available as single tracks for pennies’ worth for those of us who want to construct the perfect playlist.

Netflix – the sign of on-demand video’s progress

This is also including music distributors and online retailers like Amazon who sell us vinyl records or CDs that come with “pre-ripped” MP3 files that are available to download. For most of us, this avoids the need to rip the CD or to copy the record to the computer’s hard disk so it can be heard over the network or on our portable devices.

Online video is mainly driven by the likes of streaming services like Netflix who are even producing their own content as well as licensing other parties’ content. They are also being augmented by “catch-up TV” services where one can view one or more previous episodes of a TV series “on demand” after it was shown. Because these services are yielding high-quality content, they have led to people in the US abandoning their cable-TV services and watching content on these services.

The Naim Uniti!Qute 2 – a high-quality network-connected music system for that small room

Most such services are nowadays being delivered via set-top boxes that connect to your home network and implement a native front end to these services. But, as smart TVs come on the scene, anyone who offers a video-on-demand service has to provide a native front-end for the main smart-TV platforms.

In some parts of Europe, ADSL and fibre-based next-generation broadband is being used to deliver pay-TV. This is more so as part of telecommunications companies offering a “single-pipe triple-play” service to their customers where one connection to the customer’s home carries broadband Internet, landline telephony and multi-channel pay TV.

They have also implemented a “hybrid broadcast broadband” platform for television where it is becoming feasible to provide TV content services, including interactive TV, by interlinking traditional broadcast TV with content available via the Internet. Broadcasters primarily use this to deliver a supplementary video-on-demand service such as a catch-up TV service to the main TV set.

At the moment- there isn’t a level playing field for providing video content on an “electronic sell-through” or “download-to-own” basis in a similar way to what is being used for audio content. There are still issues with digital-locker services or digital-rights mechanisms binding users to particular content platforms or the risk of people losing access to the content they bought if an electronic-sell-through platform ceases to exist. They are not at a point where you could buy a movie or television series online and download it to a NAS for viewing at home knowing that you still have access to the movie even if the vendor goes off-line.

Conclusion

It will take some time to bring some video content-delivery services to the home network in order to have it accessible on the main TV set, but the home network has become an entrenched part of our entertainment lives/

Article – From the horse’s mouth

Panasonic

Blog Post – Flashback Friday (PV-1742 VHS Hi-Fi VCR – US Market)

Previous Coverage

A reasonably-priced add-on solution for integrating Skype with your TV

Product Review – Sony BDP-S390 Blu-Ray Disc Player

Blu-Ray Players – they could give more life to older and cheaper TVs

My Comments

Pioneer BDP-160 DLNA-capable Blu-Ray player

What do I see of video peripherals like Blu-Ray players, Blu-Ray home-theatre systems and network video players with “smart-TV” capability is that they are able to enable an existing TV with the smart-TV functions. Examples of these functions included DLNA network media playback, client-side access to the popular online content services and even the ability to co-opt your TV in to service as a large-screen Skype videophone once you purchased an optional camera kit.

But I see Sony, Samsung, Panasonic and others who do this right following an example that was underscored through the 1980s. In the Panasonic “Flashback” blog post, they highlighted the abilities that their PV-1742 VHS Hi-Fi VCR offered when it comes to reproducing what was considered great sound from video movies in its day. This was to utilise the VHS Hi-Fi system for recording and playback of video content including playback of those videos you rented from the video store with the high-quality stereo sound.

But one feature highlighted here was to allow you to use its inbuilt stereo TV tuner to watch TV broadcasts with stereo sound playing through your hi-fi, describing it as “converting your TV in to a stereo TV”. What was being highlighted here was a TV enablement feature, in a similar way to how most video recorders released through its model year also offered other features like the ability to change channels with its remote control or provide access to extra TV content (UHF or in-the-clear cable broadcasts, more channel spaces, etc) due to what the VCR’s tuner offered or simply the use of a reliable electronic tuner even if your old TV implemented a mechanical tuner.

What I see of Panasonic touching on the capabilities of video recorders like the PV-1742 and its peers was for them to be simply a TV-enablement device like today’s well-bred Blu-Ray players.

Update: A few corrections and use of a featured image.

Article – From the horse’s mouth

CableLabs

DLNA CVP-2: Premium Content to Any Device in Any Room

My Comments

Consoles like these could be able to pick up pay TV from a DLNA CVP-2 gateway device

CableLabs have cemented their approval for the current iteration for DLNA Commercial Video Profile 2 to provide for improved in-home pay-TV setups using the home network. This leads effectively to an FCC goal that requires device-independence for cable-TV setups in the home rather than users being required to lease a set-top box for each TV in the home or install a “TV Everywhere” app provided by the cable company on each mobile device if they want cable TV on the extra screens.

What is DLNA CVP-2?

This is a super-standard defined by DLNA which uses a group of standards to assure pay-TV networks that their content is being delivered securely and surely to the display device via the home network. Here, the display device can be a Smart TV or video peripheral with “Connected TV” capabilities or software in a regular desktop / laptop computer or mobile device (tablet / smartphone) to show the TV content on the screen.

.. as could these Blu-Ray players

It will typically require a so-called “gateway device” connected to the cable system, satellite dish and/or Internet service, such as a broadcast-LAN tuner, router with broadcast-LAN capabilities or a PVR in the customer’s home while display devices and software would have to authenticate over the home network with the standards that are part of the package. The PVR solution may typically be connected to the main TV set in the lounge or family room where most TV viewing is done while TVs installed in other rooms like the bedroom can use the home network to “pull down” live or recorded TV content using “smart-TV” abilities integrated in the set or a games console / Blu-ray player.

.. as could these Smart TVs

There is the use of DTCP-IP secure-content-delivery specifications for IP-based home networks to authenticate the access of content to cable-TV / content-studio / sports-league requirements. As well setups that implement DLNA CVP-2 implement RVU which provides the same kind of user interface expected when you use pay-TV services, which could facilitate things like access to video-on-demand and pay-per-view content, access to the service provider’s TV-hosted storefront and magazine, or ability to schedule PVR recordings.

Another benefit provided by DLNA CVP-2 is to support endpoints that implement a very-low-power standby mode and allow them to use wakeup and network-reservation mechanisms to allow the efficient-power modes to operate but provide for proper useability and serviceablility. This avoids service issues that are likely to happen if a device goes to an ultra-low-power quiescent mode when not needed and finds that it has to create a brand new connection to the network and its peers when it is needed.

Do I see this as a change for delivery of the multichannel pay-TV service?

One reality is that DLNA CVP-2, like other technologies affecting TV, won’t change the calibre of the content offered on pay-TV services. You will still end up with the same standard of content i.e. a lot of channels with nothing worth viewing.

But it will affect how a pay-TV company delivers services pitched towards a multiple-TV household. They could offer, either as part of the standard service, as part of an upsaleable premium service or as an optional item, a “multiple-TV” service. This would allow a person to have the pay-TV service appear on all suitably-equipped screens instead of paying for each TV to be equipped with a set-top box.

Similarly, the main device could change from an ordinary set-top box with PVR abilities to either one with the “gateway” abilities integrated in to it or a “headless” gateway device with broadcast-LAN and PVR abilities. In this case, the main TV would either be a suitably-equipped Smart TV or be connected to a video peripheral that has this kind of “connected TV” functionality built in. It could also change the focus of the value of the customer’s bill towards the content services rather than the customer-premises equipment.

For consumers, it could be a path for those of us who move between pay-TV or triple-play services whether due to moving location or moving to a better offer. This is because there isn’t the need to mess around with set-top boxes or create infrastructure for a pay-TV service that implements different methodologies.

Article – From the horse’s mouth

Pioneer

New Pioneer Blu-ray 3D Player leads mobile device integration

My Comments

Pioneer BDP-160 Blu-Ray player

The Pioneer BD-160 network-capable Blu-Ray player may be your ordinary mid-tier component Blu-Ray player with full DLNA and YouTube functionality. As well, it doesn’t have the full makeup of services like catch-up TV or video-on-demand which may limit its use as a “smart TV enabler” for existing TVs.

But, as well as being fully equipped with integrated Wi-Fi, the Pioneer BDP-160 is one of the first of these component-type / add-on players that implements Wi-Fi Direct which creates its own Wi-Fi network for use with smartphones and similar devices. This means that you don’t necessarily have to have the player and phone being part of your home network or deploy a Wi-Fi router for standalone use to “throw” images, music and video to the big screen or speakers if the content just resides on the mobile device.  This may not be possible if you are using another device like a NAS as a content server while managing the show with a DLNA control point or Pioneer’s control app on a mobile device. Oh yeah, it is equipped with the Ethernet connectivity so you can benefit from reliable video-streaming operation with your Ethernet or HomePlug AV wired backbone.

Like most video-focused network media devices, this Blu-Ray player requires use of the TV to play audio content but you could use Pioneer’s control apps for iOS and Android devices to control audio playback from the content pools that exist on your DLNA-capable NAS or your smartphone.

The Wi-Fi Direct functionality could easily be augmented with Miracast and WiDi to allow you to use this Blu-Ray player as a display “bridge” between your laptop or mobile device. If this is added, it could play in to the hands of small businesses and organisations who make use of consumer electronics to satisfy their AV needs. But DLNA can do this task if you are “throwing” digital images or video clips to the big screen. As for reasonably-priced projectors to use with this player, who knows when we could see one of these come with proper HDMI ability.

At least Pioneer is showing us that they can make a Blu-Ray player that works as an add-on network media player for the setups where you don’t want to integrate it as part of the established network.