Tag: HomePlug AV500

Increasingly, as the cities become more dense, most of us will be either living in an apartment or looking towards doing so. In some cases, some of you may be living in a larger house in a rural or peri-urban area but maintain an apartment as a city-based “family house” if you or your family are making frequent trips downtown.

There will be issues that will impact how you set up your personal IT and home network in these apartments in order to make sure that it can coexist with your neighbours’ networks. Let’s not forget that those of you who are active in your building’s management committee may face discussions and questions about building-wide IT including the Internet Of Things. Here, I will be regularly publishing articles that may be of relevance to you and your situation.

When you are thinking of “downsizing” towards that small apartment, you may find that your needs change as far as your home network is concerned. As well, you may have to set things up so that your network coexists properly with your neighbours’ home networks especially as far as data privacy / security and network performance is concerned.

In most cases, setting up your home network and Internet connection at your apartment may be a simple task with you just installing a wireless router to use with your portable devices and, in most cases, a HomePlug AV500 powerline network segment for desktop computers and home-entertainment equipment.

But not all apartments may come across as a simple setup. For example, you may come across places with internal walls or plenums that are constructed of dense materials like double-brick, cinderblock or reinforced concrete or use metal as part of their construction, which can impede reliable Wi-Fi wireless signal reception.

As well, you need to be sure with HomePlug powerline or Wi-Fi wireless technologies that your operation of these technologies doesn’t impede on your neighbours’ use of them. This includes being sure that your data on your network stays private while theirs also stays private.

Equipment

Wireless Router

Most recent-spec Wi-Fi routers may serve you well for apartment-based networks

You can get by with most Internet routers, whether you buy them yourself or have them supplied as part of your Internet service. This may be true for a studio, one-bedroom or small two-bedroom location but you may have to consider something with improved Wi-Fi wireless performance for larger two-bedroom or three-bedroom spaces.

It is more so if your apartment follows the typical path of having the Internet connection like the telephone socket installed at one end of the dwelling which is opposite to another end where a lot of your living takes place.

Wireless connectivity

But you need to be sure that the Wi-Fi wireless functionality is of current specification. You may not need to worry about whether the router uses external high-gain antennas because of the smaller area that it is expected to cover. But I would make sure that this functionality works across two bands simultaneously especially as the 5GHz band is still seen as “new territory” for network coverage and can facilitate high throughput. Such a router will be described as 802.11a/b/g/n simultaneous dual-band or the routers that have 802.11ac functionality will be simultaneous dual-band devices.

Internet (WAN) connectivity for next-generation services

If your building is provisioned with next-generation broadband Internet service, find out whether the equipment supplied in your apartment includes router functionality or is simply a modem or optical-network terminator. In the latter situation, you would just need to use a broadband router with an Ethernet WAN (Internet) connection. It is also worth noting that a lot of FTTB (fibre-to-the-building / fibre-to-the-basement) setups will implement VDSL2 for the copper path to your apartment so you would need to use a modem router that supports this technology on the WAN side. This is a feature that is becoming available with newer mid-range and high-end DSL modem routers and is slowly trickling to economy equipment as this technology becomes more common.

In some cases, you may be lucky enough to have an FTTB setup which implements Cat5 Ethernet wiring to all of the apartments like with Spirit Telecom in Australia. The same would hold true for an FTTP (fibre-to-the-premises) setup which simply uses an optical-network terminator. Such setups would simply use a broadband router with an Ethernet WAN connection.

It is also worth noting that a lot of premium DSL modem routers including some equipment offered by carriers are offering a “dual-WAN” or “multiple-WAN” functionality where they have two different paths for connection to the Internet. This is typically an Ethernet and a DSL connection with the ability for you to select between these connection types using the configuration Web interface that they provide. Some of these modem routers have one of the Ethernet ports able to be switched between a LAN (home network) connection or a WAN (Internet) connection rather than a dedicated WAN Ethernet port and you would have to make sure you select the right type of connection for the purpose in mind.

When you move in to a new building as part of your downsizing efforts, you may need to find out from whoever is in charge of the building such as the owners corporation whether it has been provisioned for a fibre-based next-generation broadband service. Here, you would need to know what technology is being used along with whoever is providing the Internet service. This is so you can be sure you have the right equipment for the service.

That headline Wi-Fi Internet service offered by your building

Those headline Wi-Fi Internet services offered by the apartment building will work well with smartphones, tablets and computers only and are best used for casual Internet use

Avoid the temptation to use for your main Internet service that free Wi-Fi service that your building offers as a headline amenity. The kind of developments that typically offer this kind of service are “resort” apartment developments, retirement villages or so-called “residence” apartments let out on a similar business model to a hotel. It also includes hotels that have rooms and apartments available to let for long-term residence but in the same “inn-style” business context with rent; light, heat and power; telecommunications, food and similar living expenses as one payment to that hotel.

This is because of the fact that most of these networks aren’t secure, typically being set up as open wireless networks with a Web-based login experience and intended for casual login. If these networks are properly set up as a public-access network, they will be set up with client isolation so that client devices cannot discover each other across the network.

Therefure, they don’t play well with anything other than a regular (desktop or laptop) or mobile (smartphone or tablet) computing device. I encountered this problem through an online conversation from someone who bought the Sony CMT-MX750Ni network-capable micro music system that I reviewed and couldn’t run its integrated Internet radio and online content functionality and further correspondence that I had with the commenter revealed that this stereo was installed in a “resort” apartment which had this kind of free Wi-Fi Internet access. They ended up having to use it with an iOS device connected to the Wi-Fi network and running a content app for online content.

There is still the security risk of having all the network traffic associated with everyone in the building using that network being “sniffed out” especially in an improperly-configured network, along with the risk of a commonly-known password that is rarely changed.

These Wi-Fi internet services are best used when you want to use Internet-based services from your laptop, tablet or smartphone while in a common space. But you won’t be able to use your home network’s resources from a device connected to one of these Wi-Fi Internet services.

Your home network

Wired-network segment

It may be worth having your apartment wired for Ethernet if you are buying “off the plan”

It is important to consider establishing a wired-network segment alongside your Wi-Fi wireless network segment. This is more important with the arrival of Smart TVs and network-connected video peripherals so you can be sure that they work properly and provide enjoyable viewing. In some cases, if you are locating a desktop computer or network-capable printer away from the router, you may find that a wired network segment may do the job.

If your apartment is being newly built such as when you buy one “off the plan”, it may be worth considering having an Ethernet connection installed if you can afford it. Here, you could have it set up to link to the main living area, the bedrooms and / or study / office space. Here, this is important for larger spaces like two-bedroom or larger apartments, dual-level maisonettes and the like. In this context, the areas you will need to cover are where the router will be and where you will be watching TV or using games consoles or similar equipment.

HomePlug networks can work well with apartment setups as a “wired no-new-wires” network

On the other hand, you can set up a HomePlug AV500 or better powerline network segment to cover your apartment. This is more important if you are on a tight budget or are dealing with a small apartment, and would earn its keep with existing developments.

Some of you may think that you could use a HomePlug powerline network segment to temporarily extend your home network from your apartment out to a common area or your neighbour’s apartment. You wouldn’t see reliable operation if you are doing this in a larger building due to the way the building is wired for many households or the fact that the building’s electrical subsystem is also serving various pieces of  “big-time” electrical equipment like lifts or building-wide heating / air-conditioning equipment which can yield electrical interference.

Wireless access point

You may find that your your home network’s Wi-Fi wireless segment can cover your apartment easily but there are some situations where these places can yield patchy coverage especially for smartphones and tablets.

For example, your apartment may have one or more interior walls made of a dense material like double-brick or concrete and these could impede the Wi-Fi coverage. This can also include where a building uses metal ducts or plenums running from floor to ceiling in the apartment for central heating and air-conditioning, garbage disposal or other purposes. It also includes where you are dealing with pre-1960s buildings where fireplaces used to exist or still exist but in a cosmetic manner. Similarly, you may be living in a “maisonette” or similar-styled apartment where your apartment is across two levels and your network’s coverage may not span both levels properly.

The compact Devolo dLAN 550 WiFi HomePlug wireless access point – fills in the Wi-Fi gaps

Here, you may have to consider implementing an extension wireless access point to improve your network’s reception in those patchy areas. Typically the HomePlug wireless access points that use your apartment’s AC wiring as the backbone can answer this need very easily, providing just the right amount of coverage to fill in that dead-spot. Similarly, some wireless range extenders that can be set up to become access points for a wired backbone can provide that same level of coverage. At the most, you will typically end up with using two wireless access points in your setup – one that is part of the router as well as one extension access point.

How do I set this up?

The Wi-Fi wireless network

Distributed Wi-Fi setups like this NETGEAR Orbi can assure coverage across that large apartment, penthouse or two-level maisonette

In this area, you may have to identify a vacant operating frequency for the network using a Wi-Fi finder app, available for most regular-computer platforms and Android mobile platforms. Here, the channel you use would be the one where there is the lowest signal strength because no nearby networks are using that channel.

But you may find that some wireless routers, access points or distributed-Wi-Fi systems may offer this functionality as part of their setup procedure or may even automatically tune themselves as part of an “easy-setup” routine.

Then you determine a unique SSID (wireless network name) and passphrase for your network and configure your router and other wireless-network equipment to work to these specifications. Some of the routers, especially those offered by ISPs, may have a unique pre-defined SSID and passphrase, but it may be worth changing the SSID on these devices or. if you are comfortable with it, connecting your client devices to this new SSID configuration.

Shared-Internet-access setups

Some of you may use FON, Telstra Air or similar “shared Internet access” setups which require your home network router to be part of a wireless public-access network. Such services have it that you offer bandwidth to other users that aren’t part of your household, then are able to get bandwidth for free due to you offering that bandwidth to others.

This is achieved by it maintains the Wi-Fi access for your home network along with a separate Wi-Fi local network for this public-access network, typically by having two SSIDs on the same frequency – one for the public-access network and the other for your home network.

You may find that other people in the street can’t use the public-access network as expected because your router is located high up and away from street level. This can manifest with the remote device used by the person on the street acting as though it is in a fringe area and exhibiting patchy reception. It is something I have experienced in Docklands where it was a hit-and-miss affair to use the Telstra Air service offered by an apartment dweller living in one of the buildings that was facing a public walkway from my smartphone outside the building.

On the other hand, the only people who would benefit are others who are walking up and down the corridor outside your apartment.

The HomePlug powerline network

You may have to use the SYNC or SimpleConnect buttons on your home network devices like this WD LiveWire HomePlug AV switch to assure reliable secure connectivity in your apartment-based HomePlug setup

Here, this network may be a simpler affair where you just use the SimpleConnect buttons on the HomePlug adaptors to create a new network segment with its own encryption. This is a procedure that I bad described in this IT assistance article where I was instructing my former pastor over the phone about how to set up a HomePlug segment for his desktop computer when he moved to a new location. But it is imperative to perform this process when you are setting up a HomePlug segment for the first time so as to avoid your data “creeping on” to your neighbour’s HomePlug segment or vice versa.

If you are adding other HomePlug devices, you need to follow the routine for using SimpleConnect buttons to add these devices – press the button on the new device then on the existing device while watching for the lights to flicker in a certain way.

When it comes to connecting a cluster of co-located network-capable equipment together like a home-entertainment system, you can either purchase a HomePlug-Ethernet switch that has multiple Ethernet connections. On the other hand, you can simply get by with a desktop Ethernet switch connected to a HomePlug adaptor to bring all the equipment in that cluster online – most of these desktop Ethernet switches do cost very little to purchase for a five-port Gigabit type.

HomePlug AV2 like what is offered by this Devolo dLAN 1200+ adaptor may provide more stable operation when competing with large motors in the building (European setup)

Most apartment setups may be able to get by with the HomePlug AV500 powerline networks but you may find that HomePlug AV2 1200 MIMO-based technology may suit your needs better. This may be of relevance for those of you who may benefit from the extra bandwidth or who find that the highly-robust technology may cope with the high concentration of heavy-duty motors used in these buildings for things like air-conditioning or lifts better.

Other notes

If you are using a network-attached storage device or something similar, it may be preferable to connect it directly to the router rather than via a Wi-FI or HomePlug network because this assures a more reliable connection when it comes to making sure files arrive at the NAS complete.

Conclusion

An apartment can come across as a simple place to set up a home network within but there are some issues to work out so that you have a reliable secure home network that coexists with your neighbours’ home networks easily.

Previous Coverage

Feature Article: Multi-Building Home Networks

I have covered the issue of bringing your home network and Internet service to other buildings on your property, whether they be a garage, barn or granny flat (mother-in-law apartment).

You may consider this as being of value to, for example, achieve a quieter house by having your teenagers playing their video games in the converted garage; bringing Netflix and similar services to the man-cave or just simply allowing whoever is sleeping in the guest-house to have access to the Internet.

Europeans will benefit from the fact that one right-sized satellite dish could cover your property’s satellite-TV needs including the ability to watch from that granny flat thanks to SAT>IP technology that exploits your home network as a satellite-antenna link.

This will provide what I have been talking about as a single diagram that you can understand.

Methods to link buildings in a multiple-building home network

Article – From the horse’s mouth

Devolo

dLAN 550 WiFi

Press Release (German Language – Deutsche Sprache / English language)

Product Page (German Language – Deutsche Sprache / English Language)

My Comments

Devolo have released a highly-compact HomePlug AV500 wireless access point that only takes up the space needed to plug in an ordinary appliance in to that power outlet.

The dLAN 550 WiFi works with HomePlug AV500 powerline network segments and is a Wi-Fi access point for 802.11g/n N300 two-stream wireless networks along with having a single Ethernet socket.

But the dLAN 550 WiFi is a small cube which has the same effective volume as a typical AC plug-head on the end of an appliance’s cord or a small plug-in nightlight in Europe or Australia, something I have observed with the situational photos that Devolo has published on their Website. This means that it only occupies the power-outlet space needed to plug in an appliance, thus avoiding problems that can occur with most HomePlug devices where you can’t plug in other devices in to a neighbouring socket on a double outlet when one of the sockets is occupied by a HomePlug device. There isn’t the temptation to unplug the Devolo dLAN 550 WiFi from that power socket (then leave it unplugged) because you couldn’t plug the hoover in to the neighbouring power socket .

It also answers situations where there isn’t much space around a power outlet, typically due to furniture being located nearby or a power outlet that is near shelving where you crowd out that shelving with books and other objects. As well, the Devolo dLAN 550 WiFi looks more discreet this pleasing whoever is in charge of the house’s aesthetics.

The Wi-Fi access point has a specified radio range of 300 metres which would make it good enough for improving coverage in that Wi-Fi dark spot in your home and it supports a simplified “push-to-setup” routine when you want to extend a WPS-capable router’s coverage. Let’s not forget that this unit supports WPS device enrollment for setting up “open-frame” computers and devices that implement this function – press the WPS button on the nearest access point to have that Windows laptop or Android smartphone on your network in a snap.

What I see of the Devolo dLAN 550 is that it could be a step in the right direction towards making HomePlug access points effectively become less obtrusive yet are able to extend the coverage.

The HomePlug powerline adaptor – a no-new-wires network best for that desktop computer

This last Saturday, my church’s pastor opened up to me that he was running in to difficulties with connecting his desktop computer to his home network. This happened after he moved to a new location due to a new ministry placement.

In his previous location he ran an integrated Wi-Fi setup because the router for his home network was located in the lounge area, next to his home office and this wasn’t causing any problems for him. But the new location required the computer and router to be further away from each other.

A follow-up call led me to find that he had bought a wireless range extender with an intent to use as a wireless-Ethernet bridge but found that this device was difficult to configure. Here I suggested something better in the form of a HomePlug AV500 powerline network segment which is something I have always advocated on this site as a “no new wires” solution for situations involving desktop computers and similar devices. He was confused about how these network segments worked because he was used to either a “new-cables” Ethernet setup or a wireless setup as a network setup and though this technology wasn’t going to work in his situation.

After the church service, we went out to lunch at a local shopping centre and afterwards, he and I went to a local JB Hi-Fi store in the shopping centre and he bought a HomePlug AV500 kit upon my recommendation. I had him have a look at the concept diagrams that were on the boxes of some of the other HomePlug devices stocked nearby this kit to understand what these devices were about and how they work.

Later on, my pastor rang me for assistance in setting up the HomePlug AV500 network and I helped him over the phone through the setup process where you have to press the SimpleConnect paring buttons to pair the adaptors over the AC wiring and establish the connection. This involved holding down the SimpleConnect button on one device for 10 seconds then pressing the SimpleConnect button on the other device for 2 seconds but watching for the lights to flicker in a certain way.  I also suggested that this procedure is done on power outlets that are located close to each other before finally connecting them to the desktop computer and the router.

I also stressed that these adaptors had to be plugged directly in to the wall or in to an ordinary powerboard or double adaptor that doesn’t have surge-protecting or line-conditioning features. A few minutes later, I received a text-message of success that he had established the HomePlug AV500 powerline segment and set this up with the desktop computer and router.

Here, this support situation illustrated the fact that Wi-Fi wireless networking doesn’t suit all network needs and situations; and that a HomePlug AV500 powerline network can provide a better “no-new-wires” solution for sessile devices like desktop computers or home entertainment equipment.

Article (French language / Langue Française)

De nouveaux Freeplugs à 500 Mbps pour la Freebox Révolution | Freenews.fr

My Comments

Freebox Révolution now available wiht HomePlug AV500

The Freebox Révolution is the first wireless modem-router to support software updating to 802.11ac through its latest software update (mise à jour). But both the Freebox Server and Freebox Player came with the “Freeplugs” which are power supplies that integrate a HomePlug AV bridge in their functionality. This is typically to link the Freebox Player in the living room to the Freebox Server in the study or home office.

Both the “Freeplugs” were compliant to the HomePlug AV specification which worked the link at a best-case line speed of 200Mbps. This is although there are many HomePlug AV500 devices that can work the link to 500Mbps and are compliant to the IEEE 1901 specification for powerline local area networks.

Free have raised the game for the Freebox Révolution by delivering newer systems with “Freeplug” power supplies that work to the HomePlug AV500 specification rather than the older HomePlug AV specification. The only problem that I see with this is that customers who own an existing Freebox Révolution can’t easily purchase these adaptors as accessories for their existing setup i.e. they are only available to customers who are upgrading existing equipment or establishing a new installation. Personally, I would recommend that they be sold as aftermarket accessories for existing users.

On the other hand, you could use separate HomePlug AV500 devices to link these boxes while the existing Freeplugs are used simply as power supplies. This could allow you to use a uninterruptable power supply with the Freebox Server to avoid loss of telephony when the power goes down.

At least this is another example of the Freebox Révolution being considered cutting-edge for carrier-supplied consumer-premises equipment especially in an Internet-service market that has healthy competition.

Article – in German language

Internet per Stromleitung: Anschluss der Powerline an Steckerleisten kann die Leistung beeinflussen | NetzwerkTotal.de

From the horse’s mouth

AVM

Product Page (German language)

My Comments

AVM, known for their premium Fritz!Box routers have launched their latest HomePlug AV500 wireless access point which is a device that I consider important for stone-built European country houses that are “Wi-Fi difficult”. This unit, known as the AVM FritzPowerLine 546E provides a Wi-Fi segment to the dual-stream 802.11n specification for the 2.4GHz band and supports WPS push-button client-device setup as has been talked about in this article concerning WPS in a multi-access-point network.

But it is also ready for the IPv6 home networks which are a reality for anyone using a recent high-end consumer or small-business router and will become common as more countries roll out next-generation broadband.

But the FritzPowerline 546E is one of the few HomePlug access points equipped with a filtered mains outlet which you can plug equipment in to. AVM takes this further by making this socket a switched socket which works with their home-automation software. For that matter, this function is manageable through the device’s Web user interface and provides not just instant remote “on-off” but a time-switch function.

What I see of this device is that it isn’t just like other HomePlug wireless access points but is offering more functionality in a different way. This is especially as the HomePlug powerline network is being considered very clearly in the UK and Europe as a viable no-new-wires network segment.

In my first part of the series on this year’s International Funkaustellung 2013 trade show, I had covered the personal IT trends that were being underscored here. These were the rise and dominance of the highly-capable Android smartphone, the arrival of the large-screen “phablet” smartphones, Sony offering high-grade digital-photo abilities to smartphones and improving on these in their smartphones, the convertible and detachable-keyboard notebook-tablet computers becoming a mature device class as well as the arrival of the smartwatch as a real product class.

Now I am focusing on what is to happen within the home for this second part.

Television-set and home AV technology

The television set is still considered an integral part of the connected home, especially as a group-viewing display device for content delivered via the Internet or the home network.

4K Ultra-high-definition TVs

Most of the activity surrounding the 4K ultra-high-definition TV technology has been with manufacturers releasing second-generation 4K models with the focus on the 55” and 65” screen sizes. It is also the time when the HDMI 2.0 connection specification, which yields the higher throughput for the 4K ultra-high-definition video plus support for 32 audio streams and more, has been called and most of these manufacturers are accommodating this in their second-generation designs whether baked in or as a firmware update as in the case of Sony’s newly-released 55” and 65” 4K designs.

Panasonic had initially held off with releasing a 4K set but released the Smart VIERA WT600 which is a 55” OLED 4K which had the “second-generation” credentials like the aforementioned high-speed HDMI 2.0 connection. LG had launched a pair of 4K models with one having a 50-watt soundbar and “micro-dimming” which adjusts the screen brightness in an optimum manner for the video material. Even Haier, the Chinese consumer-goods manufacturer had jumped in on the 4K bandwagon.

There are still the very-large-screen 4K UHDTV sets with screens of 84” to 94”. Now Samsung have launched 4K models with astonishing screen sizes of 98” and 110”.

At the moment, there is some work taking place concerning the delivery of content with the 4K screen resolution. Sony have set up a download-based content delivery service with the FMP-X1 hard-disk-based media player and based around a rental-based or download-to-own business model. Samsung is partnering with Eutelsat to deliver 4K UHDTV broadcasts to the home using satellite-TV technology as well as others working with the Astra satellite team to achieve a similar goal.

OLED TV screens

Another key trend that is affecting the “main-lounge-room” TV set is the OLED display reaching 55” and above in screen size. Those of you who own or have used a Samsung, HTC or Sony smartphone will have seen this technology in action on the phone’s display.

Samsung and LG have increased their factory output of these large-size screens which has allowed the material price of these screens to become cheaper. Here, it has allowed for more manufacturers to run an OLED model in their lineup, whether with a flat display or a convex curved display. Most of these models are 4K displays and have a 55” screen. Haier even went to the lengths of designing a 55” flat OLED TV that is in a housing that can’t easily be tipped over while LG had fielded a model with a flat OLED screen and a model with a curved OLED screen.

For that matter, LG improved on the aesthetics of the flatscreen TV by implementing a “picture-frame” design which make the TV look like a beautiful large piece of art on the wall. This was augmented with a screenshow collection of artworks that are part of the TV’s firmware.

Other TV and home-AV trends

Brought on by the Philips Ambilight background-lighting initiative, some of the manufacturers are integrating LED-based background lights in to their TVs to provide the complimentary lighting. Philips even took this further with the ability to synchronise LED-based multicolour room lighting with their set’s Ambilight background lighting.

What I also suspect is happening with TVs destined for the European market is that they will be equipped with DVB-T2 digital TV tuners. This is to complement the arrival of DVB-T2 TV-station multiplexes in various countries that are primarily offering HDTV broadcasts.

Sony is also taking a stab at high-grade home audio by building up a file-based music distribution system that implements hard-disk-based media players with one downloading the music as files and syncing it to these hard-disk media players. Like SACD, this technology is meant to sound as good as the studio master tapes. Comments have been raised about the provision of two different files for each album or song – one that is mastered to best-quality standards where there is the full dynamic range another file, packaged as an MP3 perhaps, that has compression and limiting for casual or “noisy-environment” listening.

The home network

TV via the home network

Broadcast-LAN devices

There has been a fair bit of activity on the “broadcast-LAN” front courtesy of the SAT-IP initiative for satellite TV which I previously touched on. This has manifested in a few satellite-based broadcast-LAN boxes that are equipped with multiple tuners showing up at this year’s show including one 2-tuner model from Devolo and one four-tuner DLNA-equipped model from Grundig.

Similarly, SiliconDust have brought in the SimpleTV service model to Europe which provides a network-hosted PVR and broadcast-LAN setup for regular TV. I would see this has having great traction with Europeans because all of the European countries have free-to-air offerings anchored by the well-funded public TV services like BBC, ARD/ZDF, France Télévisions, and DR which yield content of high production and artistic quality. AVM have also used this show to launch a SAT-IP-compliant broadcast-LAN setup for the DVB-C cable-TV networks that exist primarily in Europe but links to an existing Wi-Fi network segment which wouldn’t let the device do its job in an optimum manner.

Other TV-over-Internet technology

Philips has also joined in the “over-the-top” cloud-driven TV party that Intel and Google were in by putting up their concept of a “virtual-cable” service delivered via the Internet.

LAN technologies

Wi-Fi wireless networks

Even though the 802.11ac high-speed Wi-Fi wireless network standard isn’t ratified by the IEEE, nearly every major manufacturer of home-network equipment has at least one, if not two, wireless routers that support this technology. Some even supply USB network-adaptor dongles that allow you to benefit from this technology using your existing computer equipment.

HomePlug powerline networks

There have been a few HomePlug AV2 adaptors appearing with the Continental-style “Schuko” AC plug on them, such as the Devolo dLAN 650+ and the TP-Link TLP-6010 but the manufacturers wouldn’t really state whether these fully work to the HomePlug AV2 standard. They are typically rated at 600Mbps for their link speed and are at the moment the Single-stream type.

As for Devolo, they have launched the dLAN 500 WiFi which is a HomePlug AV 500 “extension access point” for wireless networks. Here, Devolo have made an attempt in the right direction for “quick setup” of multiple-access-point Wi-Fi segments by implementing a “settings-clone” function. But this works using the HomePlug AV backbone and only where you use multiple dLAN 500 WiFi access points on the same backbone.

Home Automation

Some of the appliance manufacturers have gone down the “connected path” by equipping some of the top-end appliance models with Wi-Fi connectivity and implementing a manufacturer-developed dashboard app for the iOS and/or Android mobile platform. Here, these apps either work as a secondary control surface for the appliance or provide extended setup and configuration options that aren’t available on the appliance’s control surface.

Samsung went about this with their high-end washing machine where they use this connectivity as a remote “dashboard” so you can know if the machine is underway and on the correct cycle or be able to be notified when the washing is done. Philips uses a similar setup for their multifunction countertop cooker but it allows you to determine a recipe on your phone and dump that down to the cooker. But this, like a similarly-equipped coffee machine was really a proof-of-concept machine.

Thomson had offered a convincing home-automation kit which uses its own connectivity technology but can connect to Z-Wave or Zigbee networks using a bridge module. My question about this kit is whether you can start out with what is supplied but grow beyond by adding in the extra modules from Thomsom or other third parties as required.

Other Trends

This year has become a key year for vehicle builders to push forward connected app-driven infotainment and telematics in their vehicles that will hit European roads. It implements a mobile broadband connection to the car via the driver’s smartphone or another device along with apps for popular online services optimised for safe use in the car or to work with the car.

It has been exemplified by Ford implementing a “SYNC AppLink” setup that allows users to control favourite smartphone apps from their vehicle’s dashboard, including the ability to support voice control.

Conclusion

It certainly shows that at this year’s IFA, the personal IT products like tablets, convertible notebook computers and large-screen smartphones are becoming a very diverse and mature product class while the 4K ultra high definition TV technology is gaining some traction as a real display class.