Tag: Wi-Fi EasyMesh

Wi-Fi EasyConnect and EasyMesh are now updated further

Articles

Linksys MR7350 Wi-Fi 6 Mesh Router press picture courtesy of Belkin

Wi-Fi EasyConnect to be upgraded to simplify Internet-of-things setup

Wi-Fi Alliance debuts improvements to Wi-Fi mesh and IoT device onboarding | Wi-Fi NOW

From the horse’s mouth

Wi-Fi Alliance

Wi-Fi Alliance® connects and expands home Wi-Fi® (Press Release)

My Comments

Improvements to EasyConnect

Most of us may think of Wi-Fi EasyConnect as simply scanning a QR code with your smartphone to get your smartphone on to a Wi-Fi network that you want to use. Or it could be about using a smartphine app to scan a QR code on a device you want to bring on board to your home network that your phone is connected to.

But this week the Wi-Fi Alliance have cemented in stone ways of using WI-Fi EasyConnect to bring devices on board to your network. You still have to use a “configurator” program which could be an app on your smartphone to bring devices, known as “enrollees” on board to that network or to join that network yourself.

A Wi-Fi EasyConnect setup can support multiple “configurator” programs which will cater to environments where different software has different capabilities. As well, the standard allows a “configurator” program to work with multiple networks, allowing for realities like an individual ESSID for each waveband or people who are responsible for multiple networks.

Telstra Smarty Modem Generation 2 modem router press picture courtesy of Telstra

.. and to even build out Wi-Fi EasyMesh distributed-wireless networks simply

Here, NFC “tap-and-go” pairing and Bluetooth LE pairing is part of the standard. As well, you can transcribe a PIN or passcode shown on the device or attached to a label on that device to enrol the device to your home network. For cloud-driven device platforms like Amazon Echo, the cloud platform downloads the device identifying details to your computing device to facilitate binding it to your Wi-Fi network.

Android users may be familiar with NFC-based device pairing when they set up some Bluetooth headsets with their phones or tablets. That is where you touch your Android smartphone or tablet to the headset to start the pairing and setup process.

But there currently isn’t support for showing a PIN or passcode on the configuration software for you to transcribe in to your device you are intending to bring on board your Wi-FI home network. Such a procedure could come in to its own with devices that have a keypad or keyboard as part of their control surface, examples being smart locks or TVs that have “many-button” remote controls.

For people who manage enterprise and building networks, Wi-FI EasyConnect is updated also to allow you to onboard devices to your WPA3-Enterprise Wi-Fi business network. Here the network would have to support EAP-TLS and implement X.509 digital certificates. It is to cater towards a reality where business owners and building managers want to bring “Internet-of-Everything” devices which don’t have a rich user interface on to these networks while keeping these networks secure.

For that matter, users of devices running Android 10 or newer versions stand to benefit from Wi-FI EasyConnect in some ways without the need for extra apps to be downloaded from the Google Play Store. Here, they can use their smartphone or tablet to scan a QR code that represents their target network’s Wi-Fi details to accede to that network. Or they can scan a QR code on a Wi-Fi-capable device they want to bring to the network they are using as long as this device supports Wi-Fi EasyConnect.

It is part of making sure that Wi-Fi EasyConnect works as part of the Wi-Fi WPA3 link-layer security specifications which will be required for a Wi-Fi 6 or Wi-Fi 6 wireless-network segment to operate to specification.

The support for Wi-Fi EasyConnect that needs to come about is to have other mobile and desktop operating systems support this standard in some capacity, preferably in a native form. This would have to include using Bluetooth as an alternative to QR codes as a method of sharing Wi-Fi network credentials from a mobile device to a laptop or tablet.

Improvements to EasyMesh

Wi-Fi EasyMesh distributed-wireless setups now support onboarding of new access points using Wi-Fi EasyConnect methods. This means that the same user interface that is needed to get a computer or IoT device on your home network applies to Wi-FI network-infrastructure devices compliant to this standard. It will also be part of making sure that a Wi-Fi EasyMesh network works to the current WPA3 security expectations.

This is in addition to each of the access points in an EasyMesh setup being able to share advanced metrics about how the network is performing as a whole. Here, it will come in to play with those Wi-Fi networks that are managed or supported by other entities like business Wi-Fi.

Conclusion

The revisions to the Wi-Fi EasyConnect and EasyMesh standards are more about simplifying the process to bring Internet-of-Things devices on board to your WPA3-compliant home or business network. It is also about simplifying the process to build out your EasyMesh-compliant distributed wireless network with multiple satellite repeater units.

But what needs to happen is for more software and hardware support for these standards in order that they become increasingly accepted within the marketplace.

Wi-Fi EasyMesh acquires new features in its second release

Articles – From the horse’s mouth

Telstra Smarty Modem Generation 2 modem router press picture courtesy of Telstra

Telstra Smart Modem Generation 2 – the first carrier-supplied modem router to be certified as compatible with Wi-Fi EasyMesh

Wi-Fi Alliance

Wi-Fi CERTIFIED EasyMesh™ enables self-adapting Wi-Fi® (Press Release)

Wi-Fi CERTIFIED EasyMesh™ update: Added features for operator-managed home Wi-Fi® networks {The Beacon blog post)

Technicolor

white-label manufacturer of carrier-supplied home-network modem routers

EasyMesh R2 Will Intelligently Manage Your Home Wi-Fi (Press Release)

Previous Coverage on HomeNetworking01.info about Wi-Fi EasyMesh

Wi-Fi defines a new standard for distributed wireless netowrks

Telstra is the first telco to supply home-network hardware that supports Wi-Fi EasyMesh

My Comments

The Wi-Fi EasyMesh standard that facilitates a distributed-Wi-Fi network without the need to have all equipment from the same equipment or chipset vendor has undergone a major revision. This revision, known as Release 2, is intended to improve network management, adaptability and security as well as supporting proper VLAN / multiple-ESSID operations that is especially required with guest, hotspot and community Wi-Fi applications.

What will Release 2 offer and how will it improve Wi-Fi EasyMesh?

Standardisation of diagnostic information sharing across the network

Wi-Fi EasyMesh Release 2 will make use of the Wi-Fi Data Elements to allow the Controller device to collect statistics and diagnostic information from each access point in a uniform manner. It doesn’t matter which vendors the different equipment in the EasyMesh-compliant Wi-Fi network come from.

Here, it will benefit companies like telcos, ISPs or IT support contractors in identifying where the weaknesses are in a Wi-Fi network that they provide support for. For those of us who support our own networks, we can use the tools provided with the main Wi-Fi router to identify what is going wrong with the setup.

Improved Wi-Fi radio channel management to assure service continuity

The second release of Wi-Fi EasyMesh will offer improved channel management and auto-tuning of the access point radio transceivers. This will make sure that the Wi-Fi network is able to adapt to new changes such as newer networks being setup nearby.

It wll also be about implementing DFS to make sure that Wi-Fi networks that use the 5 GHz bands are working as good neighbours to radar installations like weather radar located nearby and using those bands. This will happen not just on initial setup of any Wi-Fi EasyMesh node but continually which will be of concern when, for example, a local meteorological authority installs a new radar-based weather station in your neighbourhood.

Increased data security for the wireless backhaul

The wireless backhaul for a Wi-Fi EasyMesh R2 network will be more secure through the use of current Wi-Fi data-security protocols like Simultaneous Authentication Of Equals. There will even be the ability to support robust authentication mechanisms and newer stronger cryptographic protocols.

It is seen as necessary because the wireless backhaul is used as the main artery to convey all the network’s traffic between the access points and the main “edge” router. This can appeal to anyone who wishes to snoop on a user’s Internet traffic; and also conveys the fact that the Wi-Fi EasyMesh network is effectively a single LAN segment where all the data for Wi-Fi client devices moves around.

Secure wireless-backhaul support for VLAN-separated data traffic

Increasingly, home-network equipment is implementing VLAN technology for a range of reasons. One of these is to facilitate triple-play services and assure quality-of-service for IPTV and IP-based telephony services offered by the telco or ISP. The other is to facilitate guest/hotspot and community networks that use the same Internet service connection but are effectively isolated from the main home or small-business network.

This release of the Wi-Fi EasyMesh standard will support these setups by configuring each node to support the multiple virtual networks including their own separate extended-service-set configurations. The wireless backhaul will also be set up to create separate “traffic lanes” for each logical network that are securely isolated from each other.

Enhanced client steering

There will be the ability to steer client devices between access points, wavebands or channels to prevent one or more of these resources from being overloaded.

For example, it could be feasible to have dual-band client devices like most laptops, tablets and smartphones work on the 5GHz band if they are dealing with multimedia while keeping the 2.4GHz band for low-traffic needs and single-band devices. Similarly, if a client device “sees” two access points equally, it could be made to use whichever one isn’t being overloaded or has the batter throughput.

Of course, the enhanced client steering will provide a seamless roaming experience similar to what happens with the cellular-based mobile telephony/broadband networks that power our smartphones. This is a feature that is of importance with any device that is highly-portable in nature like a smartphone, tablet or laptop.

Key issues that may surface with Wi-Fi EasyMesh

A key issue that may crop up with Wi-Fi EasyMesh is supporting the use of multiple backhauls across the same network and offering “true-mesh” operation rather than hub-and-spoke operation. Here, it could be about opening up options for load-balancing and increased throughput for the backhaul or providing fault-tolerance for the network.

As well, the idea of a wired backhaul implementing IEEE 1905.1 small-network management technology has to be kept in scope when designing Wi-Fi EasyMesh devices or promoting and implementing this standard. This is more so to encourage HomePlug AV2 or G.Hn powerline-network technology as a companion “wired no-new-wires” backhaul approach for deploying satellite nodes in areas where a wireless backhaul may not perform to expectation but it would be costly or unfeasible to pull Ethernet cable across the premises.

How can this be deployed with existing Wi-Fi EasyMesh networks

There are measures built in to the Release 2 specifications to permit backward compatibility with legacy Wi-Fi EasyMesh network-infrastructure devices like the Telstra Smart Modem Generation 2 that exist in the network.

As well, some vendors are taking the approach of implementing the Release 2 functionality as software form. This makes it feasible for them to bake this functionality in to a firmware update for an existing EasyMesh-compliant router or access point without the need to worry about the device’s underlying hardware.

Conclusion

I see Wi-Fi EasyMesh Release 2 as offering the chance for Wi-Fi EasyMesh to mature as a standard for distributed-Wi-Fi setups within the home and small-business user space. This release may even make it affordable for small businesses to dabble with a basic managed distributed-Wi-Fi setup due to not being required to stay with a particular vendor/

Consumer Electronics and Personal IT trends for 2020

Every year in January, the Consumer Electronics Show is run in Las Vegas, USA and this show does give a glimpse in to what trends will affect consumer electronics and personal IT. In most cases, these are products that will be on the marketplace this year or products that are a proof-of-concept or prototype that demonstrates an upcoming technology.

The problem is that this exhibition focuses on what will be available in North America but a lot of the technology will be relevant to the rest of the world. In a lot of these cases, localised variants will appear at various trade shows or PR events that occur in Europe or other areas.

As well, the trade-show circuit will attract service-level information-technology companies who don’t need to make hardware or have a hardware platform, or be a content creator. Here, it will be simply about the provision of IT-based services as part of a ubiquitous computing environment including the concept of experience-driven computing.

Connectivity Technology

Over the past year, the two main technologies that were called out regarding online connectivity or the home network were 5G mobile broadband and Wi-Fi 6 (802.11ax) wireless local networks. This is about very-high-bandwidth wireless data communications whether out and about or within your home or other small network.

As various radiocommunications regulatory agencies around the world “open up” the 6GHz waveband for Wi-Fi network use with the USA’s Federal Communications Commission the first to do so, the Wi-Fi Alliance have created a specification identifier for network equipment working this waveband. Here, it is known as Wi-Fi 6E as a way to identify the fact that the device can work the 6GHz waveband, and is in contrast to Wi-Fi 6 (802.11ax) devices that only work the 2.4GHz and 5GHz wavebands.

D-Link DIR-X5460 Wi-Fi 6 router press picture courtesy of D-Link USA

One of D-Link’s Wi-Fi 6 routers that also supports Wi-Fi EasyMesh – setting the standard for home network technology this year

Both these technologies became real with an increase in client devices or small-network infrastructure hardware supporting at least one of these technologies. This included laptop computers and smartphones having this kind of functionality baked in to them as well as more home-network routers, distributed-WI-Fi systems and range extenders being equipped with Wi-Fi 6. There is even the fact that some of the network-infrastructure vendors like Linksys and NETGEAR are offering routers that combine both technologies – 5G mobile broadband as a WAN (Internet) connection and Wi-Fi 6 as a LAN (local-network) connection.

A step in the right direction for distributed-Wi-Fi networks was to see major home-network brands offer routers and/or range extenders compliant to the WI-Fi EasyMesh standard. This allows you to create a distributed Wi-Fi network with equipment from different vendors, opening up the market for equipment from a diverse range of vendors including telcos and ISPs along with a pathway towards innovation in this space.

Bluetooth hasn’t been forgotten about here with the new Bluetooth audio specification being “set in stone” and premiered at CES 2020. This specification, known as Bluetooth LE Audio, works on the Bluetooth Low Energy profile and supports the LC3 (Low Complexity Communications Codec) audio codec that packages the equivalent of an SBC audio stream used by Bluetooth audio setups in half the bandwidth. This allows for longer battery runtimes which will also lead to smaller form-factors for audio devices due to the reduced need for a larger battery.

It also supports multiple independent and synchronous audio streams to be sent from one source device to many sink devices. This strengthens use cases like hearing aids that work with Bluetooth and may supersede the inductive loop as a technology for assisted-listening setups. As well, the multiple-streaming technology will be a boon to applications like multichannel Bluetooth speaker setups; or Bluetooth headphones as part of assistive audio, multilingual soundtrack options or semi-private listening arrangements.

The Bluetooth LE Audio technology is to be released in the first half of 2020 with compatible devices being on the market by 2021. But there will also be the issue of having device support for this technology being baked in to operating systems as a class driver.

Dell XPS 13 2-in-1 Ultrabook - USB-C power

USB 4 will be the next stage for hardware connectivity and will include Thunderbolt 3

As for wired peripheral interconnection, USB 4.0 will be surfacing as a high-speed connection standard for computers and mobile devices. There will be compatibility with Thunderbolt 3 due to Intel signing over the intellectual property rights for that protocol to the USB Implementers Forum. But this may be used by some computer vendors as a product differentiator although the market will prefer that USB 4 computers and peripherals work with those that use Thunderbolt 3. Let’s not forget that the physical connector for USB 4 will be the Type C connection.

Let’s not forget that newer Android phones will use USB Power Delivery as the official standard for transferring power from chargers or powerbanks to themselves. This is about avoiding the use of proprietary fast-charge technologies and using something that is defined by the industry for this purpose.

Computer trends

Lenovo IdeaPad Creator 5 15" clamshell laptop press picture courtesy of Lenovo USA

Lenovo IdeaPad Creator 5 15″ clamshell prosumer / content-creator laptop

At the moment, as I outlined in the article about “prosumer” content creators being identified by computer manufacturers as a significant market segment, this year is being seen as a time to launch performance-optimised computers targeted at this user group. These units will be optimised to work with popular content-creation software in a sure-fire manner.

Let’s not forget that Lenovo is tying up with NEC in order to create the LAVIE computer brand that targets mobile professionals. This was after Toshiba spun off their laptop-computer division as “Dynabook” brand then sold it to Sharp; and Sony sold off their VAIO computer brand with it existing as a premium computer brand. But is this symbolic of what the Japanese computer names are heading towards where they focus on creating premium business laptops and tablets.

As well as offering their newer-generation CPUs, Intel has demonstrated that they can offer their own high-performance personal-computer display infrastructure. They even demonstrated a graphics card that use Intel-designed discrete GPU technology. This leads towards them competing with NVIDIA and AMD when it comes to discrete graphics-infrastructure technology and could lead to a three-way race in this field.

It is alongside AMD placing a lot of effort on their Ryzen CPUs which are leading towards them in a position to effectively compete on a par with Intel’s Core CPUs. As well, Intel and AMD could head towards creating performance computing setups that are based around their CPUs and discrete graphics infrastructure technology, including setups that have the CPU and discrete GPU on the same silicon.

There is also an increase in the number of “Always Connected PCs” that run with ARM RISC microarchitecture rather than the traditional Intel i86/i64 CISC microarchitecture. They will be about operating on batteries for a very long time and have 4G, if not 5G mobile-broadband modems with classic SIM or eSIM service authentication. Most likely I would see them as being the direction for portable mainstream business computing.

Dell G5 15 Special Edition budget gaming notebook press picture courtesy of Dell USA

Dell G5 15 Special Edition budget gaming laptop with AMD Ryzen and Radeon silicon

For gaming, Dell has premiered a budget gaming-grade laptop that uses an AMD Ryzen CPU and an AMD Radeon graphics processor but is styled like their other “G Series” gaming laptops. As well, Lenovo took an interesting step with one of their gaming laptops by using Intel integrated graphics processors for its graphics infrastructure while equipping it with a Thunderbolt 3 port. Here, the user is to buy an external graphics module, typically the Lenovo BoostStation card-cage unit which is their first product of its kind that they released, to have the machine perform at its best. What this is about is a trend towards creating an entry-level performance laptop product range, very similar to buying the increased-performance “GT” variant of a popular family car model.

Lenovo ThinkPad X1 FOLD prototype folding-display computer press picture courtesy of Intel USA

Co-engineered by Intel and Lenovo, ThinkPad X1 FOLD is a foldable-screen device built on the Intel Core processor with Intel Hybrid Technology (code-named “Lakefield”). (Credit: Lenovo) – an example of what folding computers are about

 

Another trend that is being shown frequently is multiple-screen or folding-screen portable computers. This is being promoted by Intel and Microsoft in the context of Windows 10X and newer Intel chipsets. It is being driven by the multiple-screen or folding-screen smartphone that Samsung and others are on the verge of releasing as finished products. But this technology will have a limited appeal towards early adopters until it is seen as legitimate by the general user base.

As far as small-form-factor desktop computers are concerned, Intel is working towards a modular “next unit of computing” platform which has the whole computer system on a card the same size as a traditional PCI expansion card. This platform, known as Ghost Canyon uses the “Compute Element” which is the user-swappable card, is intended to bring hack the joys of us upgrading a computer’s performance by ourselves even if we go for a smaller computer platform.

Connected-TV technology

This year has heralded interest in 8K UHDTV which has effectively twice the resolution of 4K UHDTV. As well, the 8K Association has been formed in order to set standards for domestic 8K UHDTV applications and promote this technology.

It is in conjunction with ATSC 3.0, also known as NextGenTV, being premiered at CES 2020 as a new direction for free-to-air TV in the USA. It us being valued thanks to people moving away from cable and satellite pay-TV services towards Netflix and other video-on-demand services augmented by free-to-air TV. Here, it will allow Americans to benefit from 4K UHDTV and Dolby Atmos technology via the TV antenna. Like with DVB and HBBTV-based standards used in Europe and Oceania, this technology combines the over-the-air signal with broadband Internet data to achieve advanced TV experiences.

There is also increased robustness as far as antenna-based reception is concerned which may allow for use of indoor antennas without their associated problems. As well, mobile users will benefit from this newer technology for on-the-road viewing. But there will also be an emphasis towards broadcast-LAN operation with one tuner offering a broadcast signal amongst multiple TVs. Users can upgrade their existing televisions to this technology by connecting an ATSC 3.0 set-top box to their TV as they see fit, but there will be some TVs, most likely “living-room” models from a few manufacturers, that will support this standard.

The 4K AMOLED screen is entering the “Goldilocks” territory when it comes to product price and screen size – not too big and expensive, not too small or cheap, but just right. It is seen by the trade as a “mid-market” territory but, for a TV, it is about something that appeals to more people without being too ostentatious or requiring one to pay a price’s ransom.

The advantage it has over the LCD screen that rules this market territory is to have increased contrast and richer colours, something that those of you who have a smartphone or tablet with an OLED display benefit from. As well, it is a technology that legitimises the high-dynamic-range and wide-colour-gamut video reproduction technology being pushed by the film and video industries.

Here, Sony released the first 48” 4K AMOLED screen that would be able to fit most viewing areas. This includes apartments and small houses as well as use in bedrooms, or secondary lounge areas including living rooms which aren’t frequently used for watching TV. As well, some AMOLED TV manufacturers are pitching sets that cost under US$1000. Here, this price point puts the AMOLED TV within reach of most middle-class families who are considering upgrading to this kind of technology without paying a price that sounds too vulgar.

Another trend affecting TVs is support for variable high refresh rates. Here, it appeals towards games consoles being able to work with game-optimised variable-refresh-rate monitors typically partnered with PC-based desktop gaming rigs, offering the same kind of display refresh rate as the display card on a gaming-rig PC would offer. This is being factored in because the large-screen TV is being valued in the context of gaming, especially with one-machine multiple-player games or the excitement of playing a favourite game on that big screen.

As well, I see the Apple TV and Android TV platforms as dominant smart-TV / set-top-box platforms due to the existence of strong code bases, strong developer communities and a well-nurtured app store. Here, the Android platform will appeal to TV vendors who haven’t invested in a smart-TV platform along with some third-party set-top box vendors. But the Android TV platform as a set-top-box platform has to be disassociated from the so-called “fully-loaded” Android boxes that are sold online from China for access to pirated TV content.

This is being driven by an avalanche of video-on-demand services that will appear over this year. Some of these will be subscription-based and offer new original content produced by the service’s owner while others will use advertising, perhaps as part of a freemium arrangement, and work heavily on licensing deep back-catalogue material. There will also be an effort amongst the new video-on-demand providers to take an international approach, appearing in multiple markets around the world, most likely with the goal of licensing content in all international markets concurrently.

It will even lead to each content-production name having its own video-on-demand service that primarily hosts content from its stable. But the question that will come about is how many video-on-demand subscriptions will we be having to budget for and maintain if we want content that reflects our choices.

Audio Technology

The DAB+ digital broadcast radio platform is increasing its footprint within Europe and across some parts of Africa and Asia. It includes some European countries like Norway and Switzerland moving their broadcast infrastructure away from AM and FM radio to this technology.

Pure Sensia 200D Connect Internet radio

Pure Sensia 200D Connect Internet radio – a representative of the current trend towards the “hybrid radio” concept

Here, it would be about an increased variety of devices that have broadcast-radio reception functionality based on this platform, including those that have Bluetooth and/or Internet-radio functionality. As well, more vehicle builders are being encouraged to supply DAB+ radios as factory-standard in all of their vehicles. Let’s not forget that value-priced DAB+ and Internet radio equipment will be equipped with a colour display that shows things like station branding or album cover-art while you listen to that station.

RadioDNS will be something that facilitates a hybrid broadcast-broadband approach to broadcast radio. This will include the ability to switch between broadcast-radio channels and an Internet radio stream for the same radio station or allow for richer supporting content to appear on the set’s display. It can also be about a “single-dial” approach to finding stations on broadcast and Internet bands. But RadioDNS has been given more “clout” in to the USA due to it being able to work with AM, FM or HD Radio (IBOC digital radio on AM and FM) which is used there.

Sonos’s partnership with IKEA, the furniture store who sells furniture that you assemble yourself with an Allen key, is demonstrating that a high-end multiroom-audio platform can be partnered with a commodity retail brand. What it could lead to is an incentive to build these kind of platforms around a mixture of premium, value and budget units, allowing for things like a low-risk “foot-in-the-door” approach for people starting out on that platform or people who have the premium equipment building out their system with cheaper equipment in secondary listening areas. It could even put pressure on the industry to adopt a common standard for multiroom-audio setups.

The streaming audio-on-demand scene is moving in a manner as to shore itself up against Spotify. Initially this is about offering either an advertising-supported free limited-service tier as what Amazon and Google are doing, or to offer a premium service tier with a focus on CD-quality or master-quality sound which is what Amazon is doing. But it could easily go beyond the “three-tier service” such as improved playlists, underrepresented content, support for standalone audio equipment, and business music services. As well, your ISP or telco could be providing access to a streaming-audio service as part of their service package or you buy a piece of network-enabled audio equipment and benefit from reduced subscription rates for an online music service.

The headphone scene is setting some strong contenders when it comes to excellent value-for-money for noise-cancelling Bluetooth headsets.

Bose initiated this battle with the QuietComfort 35 II headphones with the technological press’s reviewers seeing them as a standard setter for this class of headset. Then Sony introduced the WH1000XM3 headphones and these were seen on a par with the Bose cans but at a more affordable price with some press using terms like “Bose-killers” to describe them. Bang & Olufsen came in to the party and offered a premium noise-cancelling Bluetooth headset known as the Beoplay H9. But lately Bose also answered Sony by offering the Noise Cancelling 700 headset that effectively did that job in a minimalist form. This is while Sony are intending to launch the WH1000XM4 this year to raise the bar against Bose and their current product.

As far as “true wireless” active-noise-cancelling earbuds are concerned, Apple with their AirPods Pro and Sony with their WF1000XM3 have established themselves at the top of the pack for excellence. What I see of this is someone else could answer them to achieve that same level of excellence especially at a value price. This product class is also likely to benefit from the Bluetooth LC Audio specification due to the requirement for a small battery in each earbud and the small size of each earbud.

What Apple, Bose, Sony and B&O are highlighting is that they could easily compete with each other to achieve excellent products when it comes to headphones you use with your laptop, smartphone or tablet. It could even be a chance for other companies to join in and raise the bar for premium everyday-use headset design, including the idea of having audiophile headphone qualities in this class of headset.

Voice assistant platforms and ambient computing

Amazon Alexa and Google Assistant will still bring forth newer devices, whether in the form of speakers or displays. But Amazon Alexa and Microsoft Cortana will be part of the Open Voice Initiative allowing the same physical hardware to handle multiple voice assistant platforms.

A question that will arise through this year is whether there will be a strong direction towards having these devices work as a fixed audio or video telephony endpoint. This is whether the device works in a similar fashion to the classic landline telephone service with its own number; or as an extension to a smartphone that is part of a mobile telecommunications service.

The voice-assistant platforms will end up becoming part of an ambient computing trend that is underscored by facilitators like Internet of Things and distributed computing. Here, it is about computing that blends in with your lifestyle rather than being a separate activity.

As far as the Internet Of Things is concerned, the Connected Home over IP protocol was set in stone. This effort, facilitated by Amazon, Google and Apple with the oversight of the Zigbee Alliance, is about an IP-driven Internet-Of-Things data transport architecture. The idea is to do away with protocol gateways which were being used with various smart-home applications but the manufacturers were goading consumers to use their own protocol gateways with their devices rather than a third-party solution. There will be an emphasis on a safe secure interoperable Internet-of-Things network.

Data security and equipment maintenance in our personal and business lives

The Social Web will be considered a very important part of our lives with us primarily benefiting from it on tablets, smartphones or highly-portable laptops.

But it will still be a key disinformation vector. One of the new methods expected to be exploited this year is the creation of deepfakes. These are audio and video items created using artificial intelligence to make it as though a person said something when they didn’t. There will even be the ability to make the voice or face of a deepfaked person appear older or younger than they were when they were recorded, while make the voice or face appear as fluid as that of a real person.

Here, it will be used as a cyber weapon to create political, social and business instability by these representing our leaders whether they be in government, business or other circles. The deepfake will also be of value as a phishing tool in order to make the threat or plea appear to be more authentic to the victim.

As well, ransomware will begin to take on a network-wide dimension and affect business and service availability. Sensitive data, whether of a personal or business nature, will end up becoming the bargaining chip for ransomware hackers. This is in contrast to access to a computer user’s data resources which was often the case with ransomware.

The Internet Of Things will also be considered a continual security risk especially due to poor software and firmware quality control. It will lead to a conversation regarding the maintenance of our online devices through their lifecycle, including making sure they are running software that is stable and secure.

Then there is the “end-of-support” issue where a manufacturer ceases to show interest on older online devices that are currently in use. That is a question that is surfacing when one invests a significant amount of money in to the devices and people don’t want to throw out older equipment just because the manufacturer doesn’t want to support it anymore. It also goes against the grain of the post-Global-Financial-Crisis attitude most of us have adopted where we don’t want to support a throwaway society but want to see what we buy exist for the long haul.

The Sonos debacle raised the issue about what level of functionality the user should expect from their device along with how platform-based setups consisting of legacy and newer devices should behave. It also raised the issue of keeping the device’s software stable and secure.

Conclusion

This year will be considered a very interesting time for our online life as we see improvements to existing technologies along with newer conversations about how system-based technologies continue to evolve with a secure stable mindset.

Telstra is the first telco to supply home-network hardware that supports Wi-Fi EasyMesh

Telstra Smarty Modem Generation 2 modem router press picture courtesy of Telstra

Telstra Smart Modem Generation 2 – the first carrier-supplied modem router to be certified as compatible with Wi-Fi EasyMesh

Article – From the horse’s mouth

Telstra

Telstra offers world-first Wi-Fi EasyMesh™ standard in new Smart Wi-Fi Booster™ 2.0 (Press Release)

Previous HomeNetworking01.info coverage on Wi-Fi EasyMesh

Wi-Fi defines a new standard for distributed wireless netowrks

My Comments

Typically Australian telcos and ISPs who supply a modem-router to their customers as part of providing Internet service are associated with supplying substandard hardware that doesn’t honour current home-network expectations.

This time, Telstra has broken the mould with their Smart Modem Generation 2 modem router and the Smart Booster Generation 2 range extender. Here, these devices support Wi-Fi EasyMesh so they can work with other routers or range extenders that are compliant to this standard.

At the moment, the Smart Modem can handle 4 of the range extenders and Telstra’s marketing collateral specifies that these devices can only work with each other. This is most likely due to the inexistence of routers or range extenders from other suppliers that work to this standard when the Smart Modem Generation 2 and Smart Booster Generation 2 were released.

The media release was talking of 450,000 Generation 2 Smart Modems in service around Australia, most likely due to NBN providing an excuse to upgrade one’s modem-router. As I said in my post about this standard, it is independent of the hardware base that the Wi-Fi infrastructure devices have thus allowing an extant device to benefit from this technology through a firmware upgrade.

Here, Telstra has taken the step of providing the functionality to the existing Generation 2 Smart Modem fleet by offering it as part of a firmware upgrade as what should happen with carrier-supplied network equipment. This will be done in an automatic manner on an overnight basis or when you first connect your modem to the Internet service.

This is showing that a telco or ISP doesn’t need to reinvent the wheel when offering a distributed-Wi-Fi setup. Here, they can have their carrier-supplied Wi-Fi EasyMesh-compliant modem router work with third-party EasyMesh-compliant repeaters that are suited for the job.,

Wi-Fi defines a new standard for distributed wireless netowrks

Articles

NETGEAR Orbi distributed WiFi system press image courtesy of NETGEAR

Wi-Fi now to standardise the operation of distributed Wi-Fi setups like the NETGEAR Orbi with the EasyMesh standard

A new Wi-Fi standard could let different mesh routers work together | The Verge

Mesh Wifi gear from different companies could soon work together | Engadget

Wi-Fi Alliance’s Wi-Fi EasyMesh certification aims to standardize mesh networks | PC World

From the horse’s mouth

Wi-Fi Alliance

Press Release

EasyMesh Product Page

My Comments

Increasingly, home and small-business Wi-Fi users are showing interest in distributed-WiFi network systems that implement simplified configuration and hands-off optimisation. They consist of multiple access-point devices and use a Wi-Fi path or, in the case of a few systems, an optional wired-network path to provide a backhaul to the router that links to your Internet service.

People are showing interest in these setups as a simplified way to assure Wi-Fi wireless-network coverage across a large or multi-storey / split-level building or a building that uses materials and construction techniques that play havoc with Wi-Fi network coverage. As well, they don’t want to deal with devices that are difficult to set up or to have to remember which SSID to use for best coverage in a particular area.

To the same extent, those of us who have separate buildings on our properties like a cabin or converted garage may want to be sure we can gain reliable access to the Internet and network resources from these buildings. Some of the distributed Wi-Fi systems like the Netgear Orbi can support wired backbones which can work with a HomePlug powerline link or Ethernet cable strung between the buildings and this could bring seamless Wi-Fi network operation to these buildings.

But the current problem with these systems is that you have to create the system with equipment from the same vendor or, in some cases, implementing a particular chipset. This makes it hard for customers to mix and match equipment to create a distributed-WiFi system that answers their needs exactly.

There is also the risk that if a manufacturer abandons their distributed-WiFi product line and one of the units fails, customers can’t replace the faulty unit with a new one from a different vendor – they would have to scrap the whole system. The same situation also applies if a customer wants to use a unit that offers specific functionality such as a router with higher security, a modem router or a weatherproof access point.

Enter the Wi-Fi Alliance who have established a certifiable standard with a trademark for these kind of systems. This standard, known as the EasyMesh standard and is part of their device-certification scheme, is based on the IEEE 1905.1 protocol for small-network configuration allows for “mix and match” operation of a distributed-WiFi system.

A network based on the Wi-Fi EasyMesh standard can implement a backhaul based on a Wi-Fi wireless and/or a wired (Ethernet, HomePlug powerline, MoCA TV-aerial / cable-TV coax, etc) medium. As well, the devices can support a dedicated Wi-Fi backhaul segment with dedicated radio transceivers or use the same Wi-Fi segment used to serve client computing devices.

There are two classes of device that exist across an EasyMesh Wi-Fi network – a Controller and an Agent device. The Controller co-ordinates what is happening with the network and typically it can be part of the Wi-Fi router that is the network-Internet “edge” of your home network. But it can be software running in another computer or an access point. You can have only one of these in operation on the one EasyMesh network.

The Agent device is the access point that your client devices such as your laptop, tablet or smartphone link to your home network through. These will connect to each other and to the Controller using the Wi-Fi, Ethernet or similar backbone.

A simplified setup and device-onboarding process takes place in an EasyMesh network, with the device-onboarding process typically being facilitated through methods like NFC or push-button setup. The onboarding procedure will also be about learning the capabilities that the new device offers such as what bands it operates on and whether they can be used simultaneously or what Wi-Fi standard is being supported by that device. Of course, initial network configuration may be about determining the ESSID (Wi-Fi network name) and, perhaps, a user-chosen passphrase for your network.

Let’s not forget that the EasyMesh network implements continual self-tuning for each Agent AP node. This means that if you add or remove extra Agent APs or move them around, they adjust their operating frequency and signal strength themselves. It also applies whenever neighbours set up or modify their Wi-Fi-based home networks.

The Controller device then monitors the network for best performance and will have the network steer client devices towards access points that offer the best bandwidth. As well, the Agent access points report their measurements to the Controller device and each other to provide the self-tuning self-healing network.

The Wi-Fi Alliance stated that there is the possibility of implementing Wi-Fi Certified EasyMesh at a software or firmware level without any particular requirements as far as the hardware is concerned. This could appeal to vendors to implement EasyMesh in to existing devices as part of, say, a firmware update which is a practice that AVM have done to enable some of their Fritz series of home-network equipment for distributed-Wi-Fi operation.

But what do I see the Wi-Fi Certified EasyMesh technology lead to?

There will be the ability to supply distributed-WiFi equipment that offers better value to the home or small-business user. This includes the ability for manufacturers to supply equipment that targets particular niches such as VPN-endpoint Wi-Fi routers for business or weatherproof access points for installation outdoors. Manufacturers could even consider the idea of integrating “mesh AP” functionality in to client devices so these devices could effectively boost Wi-Fi coverage in to an area.

The technology will benefit ISPs, telcos and cable-TV operators who supply Wi-Fi routers, typically modem routers, to their customers as part of providing Internet service. Here, it could become feasible to provide a modem router with EasyMesh capability to their customer and allow these customers to purchase the EasyMesh-compliant access points that suits their needs through the ISP’s storefront or a third-party retailer.

There is also room for the vendors to continually improve on their products in many different ways without needing to worry about risks associated with designing for a proprietary setup. Here, the algorithms associated with network-performance management can be tweaked in a manner so as to carry that improvement across an existing EasyMesh setup.

At the moment, the Wi-Fi EasyMesh solution will primarily be targeted at simple small networks but there will be a call to evolve this standard to support Wi-Fi-based VLAN setups. This is more so to cater for “guest networks”, FON-style shared-bandwidth setups and IP-based telephony which will make use of these setups. Here, a setup that answers these needs may may have to cater towards replicating the multiple SSIDs and network setups these networks implement while shifting data from each SSID to each “data pipe” like the Internet or a VoIP service.

But I see the Wi-Fi EasyMesh standard leading towards the ability for householders and small businesses to make sure that their small network’s Wi-Fi segment is providing the right coverage to suit their needs.