Tag: home automation

Article

Touchscreen-enabled routers double as home automation hubs | Engadget

From the horse’s mouth

Securifi

Almond routers

Product Page

My Comments

Previous, if you were to integrate home automations or the “Internet Of Everything” to your home network, you had to use a separate “bridge” device for sensor devices that worked with Zigbee or Z-Wave. Most of these devices worked as a control surface for these devices such as showing their current status or turning appliances on at certain times or in response to certain events.

Now Securifi have built up the latest iteration of their Almond series touch-controlled routers and integrated Zigbee in them and Z-Wave in the Almond+ premium version. Both these devices can be set up to work as wireless access points or range extenders as well as routers.

They have the ability to show the current state of nominated sensors or allow you to control the sensors from the router’s touchscreen. But they also have a time-switch functionality or triggered functionality so that an appliance can come on or off according to certain conditions. These use the application-based standards associated with Zigbee and Z-Wave which is on an open-frame basis.

As well, Securifi have been working on iOS and Android apps that provide the ability to manage the home-automation ability from your smartphone’s or tablet’s screen. This may mean that you can check whether that heater in your room was actually on using your iPhone’s display and turn it off remotely as you are getting in your car rather than run in to check that it is off as I have seen before. As well, you could avoid having to glance in that rear-view mirror as you drive out slowly from home to check if that garage door is closing properly.  Securifi could extend the Almond app to work with the iOS and Android in-car, wearable and voice-assistant functionalities in order to show the various status reports on your dashboard or smartwatch or allow you to ask Siri or Google Now the current status of various appliances.

Could this be a chance for router manufacturers to integrate the home-automation hub functionality in some of their products? Here, it could open up the path for more of the smart-home ideas to come across for most people and reduce the need for extra boxes to be part of your home network.

Previously, in Part 1, I covered the trends that are affecting personal computing which encompases laptops / notebooks, tablets including the “2-in-1” convertible or detachable units, and the smartphones.

As I continue coverage of the trends shown at this year’s Consumer Electronics Show, I am highlighting what is being highlighted when we think of the connected world and the Internet Of Things. This is where devices we have on ourselves or use in the home, or the cars we drive, connect to each other and the Internet to acquire a range of impressive capabilites.

Wearable technology

There is an increasing number of smartwatches and other wearables being launched at this year’s Consumer Electronics Show. These are based on the Android Wear platform along with Tizen and other proprietary wearable platforms. It is although Apple has their smartwatch close to launch as part of their iOS ecosystem. A question that often came to mind is whether the smartwatch is to be seen as a bridge device between your smartphone and other wearable devices.

Sony raised the bar for Android Wear by integrating a GPS in to the metal-look variant of their Smartwatch 3 Android Wear watch. It may be seen as a way to provide standalone navigation and distance measurement for this watch or to serve as a secondary GPS sensor for your smartphone.

LG had headed towards smartwatches by putting forward one that is to run WebOS. This is part of having their devices run the descendent of the Palm operating system which HP refashioned as WebOS.

Lenovo had jumped on the wearable bandwagon by offering the Vibe lineup of wearable products. At the moment, the first of these products is the Vibe Band which is a water-resistant fitness band that uses an e-ink display, allowing for this device to run longer on a single battery charge.

There have been a few weirdly wonderful wearable devices like some snowboard bindings that help you plough through the powder better. These bindings measure the forces you apply on your feet as you slide down the slope and an app uses your smartphone’s GPS and these sensors to assess your snowboarding prowess. There is the Misfit LED which works alongside the Misfit range of activity trackers to show how you are performing. But the most weird device is the Emiota Belty which is a men’s dress belt that records your waistline and reports it back to your smartphone.

Hyundai Blue Link smartwatch app – your smartwatch is your keyfob

The smartwatch is becoming part of the “connected car” ecosystem thanks to some vehicle builders. As I will mention below, BMW uses the smartwatch as a key fob that is to be part of their self-parking setup that they are working on. But Hyundai has presented the Blue Link app for the Apple Watch and Android Wear platforms so you can use this watch like the typical button-equipped car keyfob. Think of this as being to touch your watch to start your Veloster from afar, open its doors or have that coupe flash its headlights so you can locate it in the car park.

The connected car

Speaking of which, the car that links to the home network and the Internet is being given a fair bit of airtime by most of the vehicle manufacturers. This is promoted by Mercedes-Benz who were exhibiting a capsule-style self-driving concept car, Ford demonstrating their idea of a self-driving car, and other vehicle builders talking about the self-driving idea for cars.

Smartwatch as control element of BMW car

BMW took the modest path by demonstrating a self-parking variant of the i3 car. This smartwatch-controlled car looks for a parking spot by itself and implements a map-based setup where it has pre-loaded maps of car parks. This is very like a valet-parking setup but without the car-park attendant parking your car for you in that car park.

It parks itself

Ford launched the third iteration of their Sync connected-car technology which will implement a touchscreen as part of its control surface and use of Blackberry QNX technology. This is intended to be part of what will be offered for the 2016 model-year vehicles.

Even the chipset manufacturers have dipped their finger in the connected-car scene with NVIDIA announcing that they are purposing Tegra and similar processors to power the connected-car dashboards.

Next generation VW infotainment works with Apple Play, Android Auto or MirrorLink

As for infotainment, there is a trend to support both Android Auto and Apple CarPlay in both factory-supply and aftermarket infotainment setups. This means that the advanced abilities of these systems can work in a system-native manner to both iPhone and Android users. The Volkswagen Group had put this forward in the latest factory-spec infotainment setups and were even involved in the level-playing-field idea of MirrorLink even when it was put forward.

Parrot have premiered the RNB6 which is a 2-DIN media unit which runs both Android Auto and Apple CarPlay but has 55 watts per channel output for all of the channels along with more options. Pioneer have launched this function in to some of their newer 2-DIN car radios. These efforts satisfy realities that exist in countries like Australia where people are likely to keep their cars on the road for a very long time.

Internet Of Everything

The Internet Of Everything has become a key feature of this show with companies either showcasing new gadgets that link with the Internet or showcasing improvements for existing gadgets with this kind of ability. Most of these devices are still pitched as a “system” of devices, cloud services and apps supplied by the same vendor that are dependent on each other and there haven’t been any devices that are pitched in a manner where they can work with other manufacturers’ devices, services or apps.

There have been some devices that are targeted at your baby’s health such as a smart baby bottle holder measures food intake. Another of these is a Bluetooth-connected infant thermometer that uses your smartphone as its display with this being developed by the company that is behind Moto’s smart temporary tattoo.

Parrot has launched houseplant water monitors that link to the home network. One is the H2O which is a sensor and automated watering system that you can use in-situ with your plants and the other is the Parrot Pot to put your plant into.

D-Link myDLink water detector alerts you via your smartphone if your washing machine leaks or the bath overflows

BeeWi and D-Link are snapping at Belkin’s WeMo home-automation technology with their own technology. The latter have packaged it in as their myDLink package which is dependent on a home-automation hub even for the Wi-Fi devices. They have Z-Wave motion sensors and door magnet/reed sensors which interlink with this hub and also work as ambient temperature sensors.

They also have a Wi-Fi-based water-leak sensor that uses a wire to sense leaking water from that dribbling washing machine along with a Wi-Fi siren unit and smart plugs. This system is managed on your mobile device through an app that D-Link supplies. TRENDNet are running a HomePlug-based home automation package that links with their TPL-406E HomePlug AV500 adaptor and the THA-102PL appliance controller with both devices using the AC wiring to communicate to each other. They also have the THA-103AC which is a Wi-Fi-managed appliance controller that works as an AC750 Wi-Fi range extender and both these systems are controlled using an app for the iOS and Android platforms.

Kwikset Kevo Plus extends online monitoring and control to this Kwikset Kevo smart deadbolt

Two companies that are known for the common door lock have fielded some “smart-lock” products, but they are focused around the “bore-through” cylindrical deadbolt form-factor that is common on many American front doors. Firstly, Kwikset have provided an IP bridge and online service for their Kevo smart deadbolt. Here, the Bluetooth-IP bridge and online service allows for such functions as “remote unlock” for situations like when you have a friend or relative who doesn’t have a smartphone with the Kwikset Kevo app to come to your house to do some caretaking or fetch something for you or to have a repair technician visit your house to perform some repair works on an appliance while you are at work. The service is offered as an annually-billed service. August who offer a similar Bluetooth-driven smart lock have come up this path using their own IP bridge to provide “remote check / remote release” functionality.

Yale Real Living smart deadbolt – enter using the code on the keypad or touch your open-frame smartphone to it

As well, Yale have launched an NFC-based smart lock that works to the Seos NFC-based smart locking platform that ASSA Abloy, the “Electrolux” of the door-hardware industry, have established. This is one that comes in the same form factor as the Kwikset Kevo but doesn’t use a key outside as a failover method. As well, it requires you to touch your NFC-capable Android smartphone to the outside keypad to unlock your door.

Tagg are working with Alarm.com to implement a tracker system for your pets. This will be based around a collar attachment that implements GPS to locate and uses 3G as a “report-back” mechanism.

The CES tech fair has given Roost some boost with their “smart battery” for existing smoke alarms. Here, they were able to show and demonstrate this battery in action as a monitoring device for the common smoke alarm.

Appliances

Unlike the Internationaler Funkaustellung where a home-appliance trade show had been merged with this consumer-electronics trade show, there has become an increasing de-facto presence of home appliances at the Consumer Electronics Show. This has been brought on by some of the Korean and Japanese consumer-electronics manufacturers wanting to show their appliances at this trade show along with appliances, both major-class “white-goods” and countertop “small-goods” and is demonstrating that home appliances are increasingly becoming part of the “Internet Of Things”.

Dacor used this show to premiere their Android-controlled ovens which used an “app-cessory” approach to controlling these ovens. This also goes alongside the use of a touchscreen as a local control surface and is representative of what is to come about for premium “white goods”.

LG Twin Wash System – two washing machines in one

LG have fielded some interesting “white goods” at this show. The show-stopper for them in this department was the Twin Wash “drawer-load” second washing machine which is installed underneath their recent front-load washing machines. It works in a manner where you can wash a small load while the main machine is processing another load. The example often cited was for ladies to wash a change of delicate underwear on the delicate-wash cycle while the main machine runs a lot of normal-cycle washing. Another example from my experience would be to turn around two white shirts by themselves while a large quantity of coloured clothes is being washed, with everything being ready to dry at the same time. They also fielded a “double door-in-door” fridge for easier organisation of food in the fridge. Samsung were fielding some interesting appliances like a dual-cavity oven and their “ActiveWash’ washing machine which implements an advanced wash action.

The coffee making scene closes in to the home network more with Smarter running a “bean-to-cup” espresso machine for the US market which uses Wi-Fi technology to facilitate its app-cessory control surface.

In the next part of this series, I will be looking at what the Consumer Electronics Show 2015 is representing for entertainment in the connected home.

Article

Don’t get sidetracked: Connecting the residential IoE | The Beacon (Wi-Fi.org)

My Comments

Appliances like this coffee machine are now working with dedicated mobile platform apps.

As the “Internet Of Things” or “Internet Of Everything” becomes ubiquitous in one’s lifestyle, there will always be some key issues with implementing this concept. It doesn’t matter whether it is for our health, wellbeing, convenient living or security that these issues will come in to play.

The core issue around the initial complexities will be due to use of network transports that don’t work on Internet-Protocol methodologies that have been established well before the Internet came to fruition in the mid-1990s. Rather, some of these implement an industry-specific data transport that requires the use of a so-called “bridge” between the non-IP transport and the IP transport.

Current implementation issues

Filling your computing devices with apps for each device and cloud service

The Internet Of Things should be about allowing these smart locks to work with other home-automation devices

At the moment, a lot of devices that offer control by smartphone require the use of vendor-developed apps and as you add more devices with this capability to your network, you end up filling your mobile device with many different apps. This leads to user confusion because you end up with having to work out which app you use to work with which device.

The same issue also affects cloud-based services where each vendor impresses on users to use the vendor’s supplied apps to benefit from these services. Again this leads to operator confusion which typically we would have noticed when we use social-media, over-the-top messaging or cloud-storage front-ends on our computing devices for each social-media, messaging or cloud-storage service.

This kind of situation makes it harder for one to develop software that makes best use of a device’s functions because they have to engineer a device to work specifically with a particular vendor’s devices. It brings us back to the days of DOS-based software where games vendors had to write the driver software to allow their software to interface with the computer system’s peripherals. This made it harder for customers to determine if that program they are after was to be compatible with their computer hardware.

Home-control systems and the home network

One issue that was highlighted was linking devices that use non-IP networks like Zigbee, Z-Wave or Bluetooth to the IP-based home network which works on Cat5 Ethernet, Wi-Fi and/or HomePlug. Typically this requires the use of a network-bridge device or module that connects to one of the Ethernet ports on the home-network router to link these devices to your home network, the Internet and your mobile devices.

Multiple bridge devices being needed

… such as this room thermostat

The main question that was raised was whether we would end up with multiple bridge devices because each non-IP sensor or controller system was working in a proprietary manner, typically bound to a particular vendor’s devices or, in some cases, a subset of the devices offered by that vendor.

The worst-case scenario is a vendor who implements a Zigbee-based distributed heating control system for a UK-style hydronic central heating system that has thermostatic radiator valves for each radiator. In this scenario this system’s components will only link to the Internet and home network using the network bridge supplied by that vendor even though it works on the Zigbee network. But if you introduce a lighting system provided by another vendor that uses Zigbee technology, this system may require the use of another bridge that is supplied by that vendor for network-based lighting control.

Support for gradual system evolution

Also there is the issue of installation woes creeping up when you install or evolve your home-automation system. Some of us like the idea of “starting small” with local control of a few devices, then as funds and needs change, will change towards a larger more-capable system with Internet and mobile-device connectivity. The issue that is raised here is that a vendor could impress upon us to buy and install the network bridge before we start out installing the home-automation devices rather than enrolling the network bridge in to an established control system at a later date. In some cases, you may have to perform a reset operation upon all of the existing components and re-configure you system when you install that network bridge.

This also underscores the situation where a vendor may allow in-place upgrading and integration of a device known to have a long service life like most major appliances, HVAC or building-security devices. This is typically achieved through the use of an expansion module that the user or a technician installs in the device and this device gains the extra functionality. Here, it should be required for the device to be integrated in to the “Internet Of Things” network without you having to reset your network or do other difficult tasks.

To the same extent, one could easily start a system around one or more older devices, yet install newer devices in to the system. For example, you have a UK-style central heating system that is based around an existing boiler that has support for an advanced heating-control system if you choose to have a control module retrofitted to that unit and this module has an LCD touchscreen as its user interface.

You purchase this module and ask the central-heating technician to install it in your boiler so you can save money on your fuel bills. Here, this system uses a room thermostat which you start out with but also can work with thermostatic radiator valves and you buy and attach these valves to the radiators around the house to improve the heating efficiency and these devices work together properly, showing the results on the module’s LCD touchscreen.

Subsequently the boiler reaches the end of its useful life and you replace it with a newer more efficient model that has integrated support for the heating-control system that you implemented but in a newer form. Here, you don’t want to lose the functionality that the room thermostat or the thermostatic radiator valves offered, but want to fully benefit from what the new unit offers such as its inherent support for modulated output.

Needs

Task-focused application-level standards

The needs highlighted here are to implement task-focused application-level standards that work for the purpose of the device and support a simplified installation routine. As well, the role of any bridge device implemented in an “Internet Of Things” setup is to provide a proper application-level bridge between different medium types independent of device vendor.

But what are these task-focused application-level standards? These are IT standards that are focused on what the device does for that class of device rather than the device as being a particular model from a particular vendor. An “Internet Of Things” example would be a smart thermostat that is known to the other devices as a “HVAC thermostat” with attributes like current temperature, setpoint (desired-comfort-level) temperature, setpoint schedules and other comfort-control factors. This makes it easier for other devices to interact with these devices to, for example set up a situation-specific “preferred” room temperature for your heating when you use a particular user-code with your building alarm system or have a weather-forecast service cause the temperature to be adjusted in a manner to suit an upcoming situation.

Some good examples of the application-level standards are the UPnP Device Control Protocols for IP networks, or the Bluetooth application profiles. In one case, the Bluetooth Human Interface Device profile used for the Bluetooth keyboards, mice and remote controls was based on the USB Human Interface Device standards used for these similar devices. This simplified the design of host operating systems to design interoperability with Bluetooth and USB input devices using code that shared the same function.

Ability for a fail-safe network

An issue that is starting to crop up regarding the Internet Of Everything is being sure of a fail-safe network. This is in the form of each device in the network always discovering each other, control devices controlling their targets every time and sensor devices consistently providing up-to-date accurate data to their target devices.As well, a device that has a “standalone” function must be able to perform that function without being dependent on other devices.

Some devices such as smart locks have to he able to perform their essential functionality in a standalone manner if they lose connectivity with the rest of the network. This can easily happen due to a power cut or a network bridge or the Internet router breaking down.

Network bridges that work with multiple non-IP standards

As well, manufacturers could be challenged to design network bridges that work with more than two connection types such as a bridge that links Zigbee and Z-Wave home-automation devices to the one IP network using the one Ethernet connection.

This would include the ability to translate between the different non-IP standards on a task-based level so that each network isn’t its own silo. Rather, each device could expose what it can do to or the data it provides to other devices in the same logical network.

This may come to the fore with the concept of “meshing” which some standards like Zigbee and Z-Wave support. Here, a network can be created with each node being part of a logical mesh so that the nodes carry the signals further or provide a fail-safe transmission path for the signals. The “bridges” could work in a way to create a logical mesh with IP networks and networks that work on other media to use these other paths to create a totally fail-safe path.

Conclusion

It will take a long time for the “Internet Of Everything” to mature to a level playing field as it has taken for desktop and mobile computing to evolve towards to that goal. This will involve a lot of steps and place pressure on device manufacturers to implement these upgrades through the long working life of these devices.

The second part of this series about the Internationaler Funkaustellung 2014 covers the consumer AV, wearable technology and home automation technologies that were being premiered at this trade fair.

Consumer AV

TVs with advanced display tech

Samsung curved OLED 4K UHDTV

There has been consistent activity with TVs that implement advanced display technology. Primarily, this has come about with more of the 4K ultra-high-definition TV sets with some of the sets with this resolution crossing the EUR€1000 price barrier for the European market and sets having a minimum screen size of 42” while most come in at the popular screen sizes of 55” and 65”.

An increasing number of manufacturers are pushing through with curved screens and the 21:9 screen aspect ratio which mimics the experience one would gain from watching a movie at the cinema. Alongside this is for the Korean names to field TVs that use OLED technology on their screens.

Firstly, Samsung have fielded a 40” UHDTV alongside the UE105S9W which is their 105” 21:9 curved screen model. They also are exploiting the “Connect One” connection box which is a way of assuring future-proof design for their sets. This has been integrated in sets based on the HU8590 chassis but is ready-to-add for their other current-issue 4K UHD TV designs. They were also fielding the curved TVs based on the 8000 Series design

LG have run with a range of curved OLED 4K Ultra HDTVs with a screen size of 65” or 75”. These implement a 4-colour OLED display technology which uses a white element in each pixel to show the white part of the picture rather than “constructing” the white part.

Panasonic VIERA AX900 Series 4K UHDTV

Panasonic are working on the improved picture quality and are running the AX630 4K TV design with a 40” model at EUR€899, a 48” model at EUR€1199 and a 55” model at EUR€1499. The sets based on this design have the HDMI 2.0 connectivity and H.265 / HEVC decoding but eschew the local-dimming improvement. They also run an extra-cost 4K TV design as the AX900 which comes in the 55” and 65” screen sizes and tick the boxes for HDMI 2.0 connectivity, H.265 support and local dimming.

Sony were pushing the quality angle with improvement on sound and extended dynamic range for the pictures, along with the Edge LED illumination feature. Their key model they were running was the S90 series which is a curved 4K UHDTV that sports the Triluminos technology and is available as either 65” or 75”.

Loewe, with TVs that are best described in German as “eine Superdeutschefernseher” have it that all newly-released models will be equipped with 4K resolution save for a 32” model. These will appear in 3 new ranges and have HDMI 2.0 connectivity and support for H.265 HEVC codecs. Thiey will implement DVB tuners that work with signals regular aerial (antenna), a satellite dish or cable-TV infrastructure and implement quick channel-change.

Thomson, the European TV name, are running with the Series Z 4K sets which are available as the Z7 (65” and 42” screens) and the Z8 (85”, 55” and 49” screens) variants. These have support also for HBBTV and Miracast mobile-phone playback.

Haier were showing the H6600 4K UHDTV range (42” to 65” screen sizes) with the 42” for less than EUR€600 and the 65” for EUR€1300 for 65”. These implement a simple design and use HDMI 1.4 connectivity. There is also the M7000 4K UHDTV range with screen sizes of 40”, 48”, and 55”. This design runs Android 4.2.2 and has access to Google Play, support for an add-in Webcam, and comes with a QWERTY remote control,

They will also implement an upgrade box for their TVs just like what Samsung did with their Evolution Box, satisfying a reality with the way TVs are used.

A Hong-Kong-based TV firm called Chanhong have shown curved OLED 4K TVs which are driven by Android technology. These are available at 55” for EUR€1700 or as 65” and 79” sizes. There is also a fiat-screen design known as the C5500 with the 42” selling for EUR€500 and the 65” selling for EUR€800. This one also implements Android technology and uses HDMI 2.0 connectivity.

Philips Android-driven curved 4K UHDTV

Philips even ran for the title of the first Android-driven curved TV, which comes in with a screen size of 55” at EUR€2390. This also implements the Ambilight feature that Philips is known for to augment the viewing experience.

Smart TV and multiscreen

The Smart TV experience is being driven on the HBBTV broadcast-Internet interactive TV technology that is being premiered in Europe and, to some extent, Australia.

Technisat were working on the “Watchmii” personal-TV experience which I would suspect is a content-recommendation service.

Platform-based “smart-TV” technologies that don’t require the manufacturers to “reinvent the wheel” were coming to light. Here, Philips was implementing Android-based Smart TVs that have access to the apps on the Google Play Store while LG was pushing the idea of implementing WebOS on their Smart TV designs.

Qualcomm are intending to use the AllJoyn and AlSeen standards to make TVs operate with smartphones and tablets.

Audio technology

Wireless speakers and multiroom audio

Harman-Kardon Omni 10 multiroom wireless speaker

The wireless speakers, some of which work with your Wi-Fi home network or as a Bluetooth speaker for your smartphone, are showing up as a very distinct product category. The innovation that is taking place here is the ability to wirelessly link two or more speakers together either to cover more sound space during a party or to provide a stereo pair with the proper desireable stereo separation. Some of the multi-room setups even make it feasible to adjust the volume for that speaker locally to your taste. These systems are being seen as an attempt to encroach on Sonos’s territory when it comes to multi-room multi-speaker wireless audio setups.

Harman-Kardon Omni 20 multiroom speaker

Another trend is that an increasing number of the portable Bluetooth speakers that have rechargeable battery packs in them are even able to work as external battery packs for mobile devices. This can help with them providing that bit extra of power on the go.

Yamaha have advanced a 3-piece elegant Bluetooth speaker and a single-piece Bluetooth speaker that creates a lightshow when playing music.

Philips SW-500M Spotify multiroom speaker

MTX, known for their beefy car-audio technology have advanced some wireless speakers along with some Street Audio earphones. One of these is the iT1 which implements a 6-amplifier, 6-speaker and 2 bass speaker arrangement and uses Wi-Fi with DLNA and AirPlay connectivity. They also fielded the iWa225 which is an in-wall Bluetooth amplifier for use with build-in speakers and supports multiroom mode using 2 of the same amplifiers.

Braven are cottoning on to the multiroom idea with their Vibe system. As well, LG are answering Sonos with their Music Flow multi-room audio setup.

Lenco are running with a multiroom setup which users single-piece speakers that are controlled by an iOS or Android app and are able to work with master-grade audio files. This system, which connects to an existing Wi-Fi small network segment, consists of the Playlink 6 speaker, Playlink 4 small portable speaker, and the Connect box which connects to an existing sound system.

Pure have refreshed their Jongo speaker lineup as the X Series speakers and implemented the Imagination Technologies Caskeid multiroom transmission technology. This technology works with multiroom setups or separate stereo speakers using the existing Wi-Fi network and the “Bluetooth Caskeid” variant provides a single Bluetooth A2DP on-ramp to the Caskeid system. These speakers are now available in white, grey or black finishes.

Harman-Kardon have fielded the Omni multi-room setup which is based around the Omni 10 or Omni 20 wireless speakers. These work on the existing Wi-Fi home network, have an Bluetooth A2DP on-ramp function and also work with 96khz 24-bit master-grade audio streams. A brace of these speakers can be set up to be a stereo pair or five of them can be set up to provide 5-channel surround sound. Harman-Kardon also offer the Esquire portable Bluetooth speaker that is so “stylish yet cool” like the well-dressed gentleman. This unit, which also can be an external battery pack, wouldn’t look out of place in his elegant briefcase.

Philips are running a Wi-Fi-based multiroom speaker setup that, again, works with the existing Wi-Fi home network but also has Spotify Connect functionality. There is the SW750 which has one tweeter and one woofer per channel and the SW700 which has one full-range speaker per channel. They also have fielded a Bluetooth speaker that doesn’t have trouble with multiple Bluetooth source devices. This one uses 1 tweeter and 1 woofer per channel along with the use of passive radiators to improve the sound.

Headphones and earphones

Sony MDR-1ADAC digital headphones with integrated DAC

The headphone scene is being advanced here with improved headphone and earphone designs as we listen to more audio content on the road. It is becoming more acceptable for one to were large “cans” when they are on the street or in public transport because of better sound quality. This is being advanced with some headphones even implementing multi-transducer “two-way” designs.

For example, Sony have put forward the MDR-1ADAC headphones with integrated digital-analogue converter along with the PHA-3AC portable DAC for use with existing “cans”. These work with some of the new Sony Walkman digital audio players, the new XPeria smartphones, Apple iOS devices or regular computers as digital headphones and yield master-grade digital audio reproduction.

As well, Sennheiser are fielding headphones that are intended to “snap at” what Beats offers for ultra-cool bass-rich headphones.

Other Hi-Fi sound trends

Technics R1 hi-fi system symbolising the return of the hi-fi brand

One main trend that is being pushed in hi-fi design is inherent support for “master-grade”  file-based digital audio with FLAC and similar files that are worked at 24 bits and greater than 96 kHz sampling rates.

Panasonic have resurrected the Technics hi-fi brand to the consumer market through them fielding two music systems. One of these is the R1 Reference System which is based around the SE-R1 stereo power amplifier with those classic power-level meters and XLR connectors that aren’t out of place on a PA system. This beast of an amplifier drives the SB-R1 3-way floor-standing speakers and is fed by the SU-R1 network audio player / control amplifier that uses separate power-supply paths for the analogue and digital signal paths.

Technics C700 hi-fi system with CD player

They also had shown the C700 music system which consists of a stereo amplifier, network audio player and 2-way bookshelf speakers. Users can also buy an optional SL-C700 CD player which has highly-strung digital-analogue conversion circuitry. These systems have been designed by Michiko Ogawa who is a Japanese jazz pianist and sound engineer and is part of the new “Rediscover Music” ethos that Technics is bringing back.

Pioneer X-HM82 3-piece music system with XC-HM82 network-capable CD receiver

Pioneer have brought in hi-fi network media players that can work high-resolution files and yield high-quality sound from regular music files and streams. They also brought in the XC-HM82 network CD receiver which plays CDs, broadcast and Internet radio, Spotify, music from your home network via either DLNA or AirPlay as well as Bluetooth A2DP music from your mobile devices. This is available as a variant with support for DAB+ digital broadcast radio and is available either as a standalone component for use with speakers that you like or as one of two music systems. The first one – the X-HM82 comes with 2-way bookshelf speakers equipped with a 12cm glass-fibre woofer and 25mm dome tweeter and finshed in that piano-black lacquer.  The second one comes with similar speakers that have a cheaper look and similar-sized drivers.

Pioneer N-70 network media player

As well they have brought in a pair of DLNA-capable Blu-Ray players with Dolby Atmos support (BDP-LX88 and BDP-LX58) along with the SC-LX88 Atmos-capable AV receiver. The BDP-LX58 even comes with a pair of XLR balanced-audio connectors along with the RCA connectors as stereo-output options so this can tie in with PA systems or high-end audio amplifiers. Their Compact Components range of micro hi-fi systems has been refreshed and now comes with a network media player and a USB DAC. In addition to this, they also have released the N-70 network media player that has hi-fi credentials and pulls music from online music services or the home network’s NAS unit using DLNA.

Pioneer have also improved the Bluetooth functionality in their latest iterations of their Bluetooth-capable car audio equipment to support the reality of multiple-phone use. This is especially to cater for the “work phone and home phone” users.

Photography

The IFA consumer-electronics show in Berlin clashes with the subsequent Photokina photography show that is held in Cologne so I won’t go in to much detail here about the cameras.

A key trend is for more DSLR cameras and camcorders to be able to take video footage at 4K UHDTV resolution.

Another trend being pushed on to the European market is for some cameras to be able to upload or play via Wi-Fi. This provides for direct access to Dropbox, Facebook and co along with the ability to support a level of DLNA compatibility.

Of course, Canon and Nikon field new or refreshed iterations of their system cameras and DSLRs

Sony have brought the NEX series of cameras to Europe along with refreshed versions of their smartphone “lens-camera” devices. One of these even works with their E-mount interchangeable lenses.

Polaroid has made the IFA the chance to launch their Socialmatic “online” camera to the European market. This camera has the ability to work with a smartphone to upload pictures to the Social Web and a variant has been launched to maintain the same “look” as their iconic 1000 / One-Step series of SX-70 platform instant-picture cameras launched in the 1970s. This include an LCD screen that mimics the look of the original cameras’ viewfinder windows but shows iconic images like the smiley face.

Personal Tech

Wearables

The Northern Autumn (Fall) is intending to become the season for a battle between manufacturers to present the best smartwatch on the block.

Samsung Gear Live Android Wear smartwatch

Here, there is an increasing number of  smartwatches that are driven by Android Wear, some of which are round. As well, there is an increasing number of models that are priced to be affordable for most along with the hybrid smartwatches that have the traditional quartz movement that drives actual hands along with an extra control / display surface integrated in the face for smartphone integration. As well, Samsung is one of the first to introduce a standalone smartwatch that isn’t dependent on a smartphone for most of its functionality.

Samsung Gear S standalone smartwatch suitable for bike riding

This watch, known as the Gear S smartwatch, has the ability to work as a smartphone or can work alongside an existing smartphone. It is based on the Tizen operating system and implements 3G communication for the cellular link. As well, the Gear S uses Samsung’s iconic Super AMOLED display technology but the display is curved, effectively to “wrap with your wrist”.

The Gear S can look just as elegant – a sign of what is to be expected of smartwatches

They also released the Gear Live watch which works on the Android Wear platform yet has the Super AMOLED display that Samsung is behind. As well, Samsung are snapping at Oculus Rift by issuing a pair of goggles known as the Galaxy VR.

LG are intending to launch an AMOLED-equipped successor to the Android Wear driven G Watch along with the G Watch R which is intended to sell in October. ASUS are running an Android Wear smartwatch which could be affordable for most with a price tag of EUR€170-200 along with the ZenWatch which is a customisable Android Wear smartwatch that oozes with style and is equipped with an AMOLED display.

Sony’s SmartWatch 3 is their third iteration of the Smartwatch range and is intended to be based on Android Wear. This is also to be run alongside the Smartband Talk which is a fitness band with hands-free telephony functionality for your smartphone along with a battery-saving e-ink screen.

Samsung Gear VR goggles to snap at the Oculus Rift goggles

The Cogito Classic smartwatch has the real moving hands to tell the current time but a display underneath the hands and on the clock face for notifications. This is part of the new breed of hybrid smartwatch (real hands that tell the time, display the shows messages or LED that indicates status, buttons or multi-function crown for controlling the smartphone. One question is whether these watches could set themselves from your smartphone and the time references that it has like the mobile towers. This includes adjusting themselves to daylight-saving time as it comes in to effect or adjusting themselves to the new time zone that you travel in to.

Home automation and security

There are a few key trends affecting home automation and security. One is having appliances link to your smartphone by Bluetooth Smart technology or your home network and work on the “app-cessory” model. This is where they gain functionality by you using a manufacturer-developed app that you draw down from your mobile platform’s app store, with this app being an enhanced display and control surface.

An example of this is the Oral B (Braun) Bluetooth-linked electric toothbrush that analyses your teeth-cleaning process and suggests better ways to do it.

A few “do-it-yourself” home-automation systems have come on the scene. One of these is the DigitalStrom home-automation system uses the AC wiring and  looks like Lego blocks. This is app-controlled and supports scene-driven or event-driven behavour and is easy to expand. Similarly, Devolo have put their foot in the door for home automation with an app-driven appliance module and contact sensor. Thomson are fielding the THOMBox which is another home-automation system that uses a computer, tablet or smartphone as the control surface.

Saeco GranBaristo Avanti automatic espresso machine represents the new direction of appliance user-interface design with mobile-device app-cessory control and high-resolution display

Another trend is for appliances to have an easy efficient safe hygienic design, One of these factors also includes major appliances and coffee machines being equipped with colour LCD graphic displays rather than a monochrome low-resolution LCD display or alphanumeric display. This has picked up from where an increasing number of multi-function printers are being equipped with colour LCD touchscreen displays. This is also augmented by the above-mentioned “app-cessory” enhanced control method where your smartphone or tablet serves as a control or display surface with access to extra functionality. In some cases, some of the conventional or microwave ovens have the ability to allow you to download recipes to them to manage the cooking process for that recipe.

For example, Bosch have established the Home Connect web-assisted platform for their appliances. For example, they have a fridge that lets you you see what is there by viewing your tablet while the door’s closed. This is achieved with two cameras that do the task of photographing what’s there after you close the door before the light turns off.

Similarly, Whirlpool / Bauknecht have designed a cooking hob that is an information dashboard for the connected home when it is not cooking food. This would show  remaining time for processes like oven cooking or dish / clothes washing cycles, along with recipes based on what’s in the fridge and information from social network feeds, etc.

Siemens even fielded the iQ700 appliance platform with a multifunction oven that has a “lift-up” control panel with storage behind. This is part of a similar “Home Connect” portal, and their dishwasher even supports assisted operation.

Dyson joins the robot vacuum party by offering a unit with a 360-degree-vision camera and the ability to locate itself based on where your furniture and other items are in the room. It also uses tank-style tracks to move between surface types along with Dyson’s well-known motor technology.

Philips have even worked on the Hue Beyond “tuneable” LED lighting system which is managed the “app-cessory” way but can be adjusted minutely.

Conclusion

This is showing how the IFA 2014 is reinforcing the concept of personal computing in the lifestyle space such as with watches, music systems and even appliances.

Articles

Beat the summer heat with the Monolyth smart AC unit | Digital Trends

Crowdfunding-Kampagne für selbstlernenden Klimaanlagen-Regler | Gizmodo.de (German language / Deutsche Sprache)

From the horse’s mouth

Monolyth

Product Page

Indiegogo crowdfunding page

Previous coverage

Tado Cooling brings the smart thermostat concept to the typical air conditioner

My Comments

This is how the typical room air-conditioner will be controlled

Another company has followed Tado’s lead in providing “smart-thermostat” and home-network capabilities to the existing room air conditioner. Here, we control a lot of the recently-installed, usually “split-system”, air conditioners using an infra-red remote control and this device, along with Tado’s device mimics the remote controls we use for these units.

Monolyth, who are seeking funding through the Indiegogo crowdfunding platform are providing this device which is a black obelisk box that links to your home network’s Wi-Fi segment to enable control from your mobile device or to benefit from various cloud services that it has. Here, you use your iOS or Android mobile device with the platform-specific app to control your air-conditioner and can use the mobile device’s GPS facility to have the AC unit off when you are away to save power or have it come on just before you arrive to get your premises comfortable by the time you are there.

The Monolyth air-conditioner controller works with air-conditioners controlled by these devices

Compared to its peers like the Tado, the Monolyth implements extra sensors to determine the comfort level such as barometric pressure, humidity and air-quality sensors. This also works along with learning weather-forecast data to optimise your air-conditioner’s behaviour to the prevailing weather situation.

Monolyth also promotes the concept of using the one app to manage systems on many properties as well as multiple air-conditioners on the one property as is becoming the typical case for most installations.

What I value of these devices is that manufacturers are adding a level of network-enabled smart-thermostat functionality to the existing installed base of air conditioners, thus allowing us to see the equipment serve us for a longer time. It also satisfies the reality that we don’t “dump” heating or air-conditioning equipment unless it totally fails or becomes hopelessly inefficient and would rather add functionality to the existing equipment using add-on kits.

Article (French language / Langue Française)

La fibre optique et la domotique débarquent dans les campings | DegroupNews

My Comments

Travelling is now becoming more of a connected affair with Internet connectivity being considered a valuable amenity wherever you stay. Even the humble campground or caravan park now offers a level of Wi-Fi-based Internet connectivity as a value-added service.

But the French have taken this further with the use of fibre-optic broadband to assure the people who lodge at these facilities have proper high-speed Internet access everywhere. They are typically in a position to do this because that country is fast becoming the poster child for a highly-competitive highly-affordable Internet service. This is in contrast to the typical cost-effective setup with one or a few Wi-Fi access points to cover the campground with Wi-Fi wireless Internet.

Yelloh Village have worked with Covage to achieve this goal and also provide an IPTV service with access to international TV channels.They have also implemented the “smart-home” concept in the bungalows or cabins that are becoming part of what the typical campground or caravan park offers. For example, when a guest leaves their bungalow, the electrical installation and hot water heater shuts down like as expected in a lot of newer hotels.

Some people may think that the idea of using a campground or caravan park for their holidaying needs is a chance to seek a humble cheap holiday but as more of these places equip themselves in a manner similar to a resort, it may become that camping in the wilderness may be the way to have that humble holiday.

Similarly, the goal to see proper rural Internet service can play in to a campground owner’s hands as a way of seeking to provide high-calibre public-access Internet to holidaymakers who are wanting to camp the “connected way”.

Article

Make your air conditioner modern with Tado’s smart thermostat | Engadget

From the horse’s mouth

Tado Cooling

Kickstarter Page

My Comments

The Tado smart thermostat works as a smart alternative to these air-conditioner remote controls

Most smart thermostats like the Nest thermostat are being pitched at central heating and cooling systems but there are a lot of places where the standalone air-conditioner is seen as a preferred option to heat or cool the home.

Typically these are either in the form of a classic single-piece unit installed through a window or wall or the increasingly-popular “ductless-split” system with an outdoor unit connected to a wall-mounted indoor unit via refrigerant pipes.  But these systems, especially the units pitched at the residential market, aren’t able to be controlled by a thermostat that can be hard-wired in to a central-heating or central-cooling system. Rather they are either controlled using knobs on the device itself in the case of older single-piece systems or an infra-red remote control in the case of most newer systems and the temperature sensor is integrated in these systems.

What Tado Cooling is working on in their current project is a “smart thermostat” that transmits infra-red control signals to remote-controllable air conditioners to have them work to a user-determined schedule or sense when a person has entered or left the room in order to have them not running when no-one’s there. These devices, like the smart thermostats used for central-heating systems, also connect to the home network to allow you to control them (and the air conditioner) from your smartphone or or work the air conditioner to provide cooling just before you arrive while having it off while you are out of the premises.

The capital for the project is being raised through the Kickstarter crowdfunding arrangement with the ability for people to have these controllers at a cheaper price so they can have better control of their air conditioners.

At least it is another way to bring the concept of smart HVAC and the “Internet Of Everything” to the large installed base of ductless-split air conditioners.