Tag: Netgear

Article

Best Buy, NETGEAR Partner On Distributed Wi-Fi System | SmallNetBuilder

From the horse’s mouth

NETGEAR

Nighthawk R7300DST Router and DST Adaptor

Product Page

Best Buy

Product Page – GET THIS HERE! (US$299)

My Comments

Most of us think of filling in our home network’s Wi-Fi dark spots where there is poor wireless reception or extending its range through the purchase of a wireless range extender. But these devices can be a headache to use and, as I have heard for myself when I talked with a friend regarding their home network, these devices are likely end up being returned to the store very quickly.

As well, when I advise someone on filling in that Wi-Fi dark spot, I recommend using an access point that connects to the router via a wired backbone i.e. Ethernet or HomePlug powerline.

NETGEAR and Best Buy has answered this problem by offering the DST package which consists of a NightHawk R7300DST wireless broadband router and DST adaptor. The DST name stands for “Dead Spot Terminator” which is about eliminating these dark spots in a home network’s Wi-Fi segment. This will also get rid of frustrations that Best Buy face with handling the number of wireless range extenders that come in as returned stock.

Here, once you have set up the Netgear DST router and given your Wi-Fi network segment its ESSID name and WPA2-Personal passphrase, you can simply plug the DST adaptor which is really a HomePlug AV2 simultaneous dual-band access point in to the power outlet in the area you need to expand Wi-Fi coverage to. Then you press the WPS and DST Sync buttons on both these devices to effectively transfer the settings to extend the network.

You could “revise” your network using the router’s interface and have these settings transmitted to the DST Adaptor. As well, you can separately purchase extra DST adaptors so you can cover that large house easily. The HomePlug AV2 segment created by this router can be used for other HomePlug AV, AV500 and AV2 devices but, as far as I know, you don’t have the ability to transfer Wi-Fi network parameters from the router to other HomePlug access points.

I would like to see Netgear offer this feature across more of their routers including the modem routers and offer these products beyond the USA. This feature can be augmented through manufacturers implementing nVoy in to their consumer and small-business networking equipment to allow for simplified network setup using the best network medium for the job,

As well, the Netgear NightHawk DST router supports up-to-date requirements like IPv6 dual-stack operation and the system supports operation up to AC1900 802.11ac Wi-Fi, Gigabit Ethernet and HomePlug AV2.

It shows that it is feasible to have one-touch setup of multiple-access-point Wi-Fi networks and that there is a future in maintaining the concept of access points with a wired backbone as a way to assure Wi-Fi coverage across a home. Who else will come up with such a package. As well, it is a first for a major appliance chain to encourage a supplier to factor in HomePlug technology as a valid solution for a problem.

Previously, in Part 1 of my series about the Internationaler Funkaustellung 2015 in Berlin, I had covered the trends affecting regular computers, tablets and smartphones especially with Intel just releasing the Skylake processor silicon which yields better performance for the same amount of power used. This has caused manufacturers to effectively refresh their desktop and portable computer lineups. As well, nearly every computer manufacturer is offering a lineup of desktop or portable computers that shine on gaming-grade performance to appeal to the core gamer and e-sports communities.

Wearables

ASUS ZenWatch 2

The smartwatch scene is slowly maturing with manufacturers offering more of these watches in their product lineups. The key trends here are about smartwatches that are designed to “look right” for the user and occasion. Here, we are seeing premium smartwatches that would look the part if you are to “dress to impress” on that date or in the corporate boardroom, but there are a few sports smartwatches with the rugged look along with a few “ladies’ watches” that look the part on her wrist.

Samsung had just launched the latest Tizen-based Gear S2 which has a traditional-looking round face and they have co-opted Alessandro Mendini, a well known Italian designer, to design accessory bands and watch faces for this watch.

ASUS has come along with the Zenwatch 2 Android Wear which uses an OLED display and Gorilla Glass protection and comes in 2 different sizes. It even has an add-on battery pack for if you want to get that more runtime out of the watch. Fossil has come up with another Android Wear watch as part of their range.

Motorola 360 smartwatches for her

Motorola have built out their Moto 360 range of Android Wear smartwatches with the Moto 360 Sport which is their smartwatch equivalent of the sports watch along with a slender “ladies’ watch” variant that will look good on her wrist. There are different finishes available such as a rose-gold look, a gold look, a silver look and a black-metal look with these watches up for preorder. This is also accompanied with a 1” TV commercial which they used to promote this watch.

LG Watch Urbane Luxe – fit for the boardroom

LG have also brought out the LG Watch Urbane Luxe which is a more premium variant of the LG Watch Urbane. This comes with an OLEP flexible display that works like the OLED displays and has a 24-carat gold finish. Huawei’s Android Wear watch can be had gold plated for US$800, gold with a leather band for US$649, black metal for US$449 and a stainless steel look for US$349.

The home network

The main trend affecting the home network is the availability of 802.11ac Wave 2 wireless-network technology which implements the MU-MIMO multi-path technology. This has led to some very powerful routers hitting the European market lately which have four MIMO streams and support the “multi-user” feature that effectively creates a Wi-Fi “switch” out of the access point.

ASUS RT-AC5300 router

ASUS has launched the RT-AC5300  which is considered the world’s fastest Wi-Fi router. This router, which uses spike-shaped antennas can run 1Gbps over the 2.4GHz band and 2.167Gbps over the 5GHz bands.

NETGEAR also fielded the 7800 Nighthawk X4S which is the first modem router to offer this kind of performance. This modem router has a DSL modem on the WAN (Internet) side that can work with ADSL2 or VDSL2 (fibre-copper) networks alongside a Gigabit Ethernet connection for fibre-to-the-premises, fibre-coaxial or Ethernet-based fibre-copper networks; and has on the LAN side, Wi-Fi capable to AC2600 4×4 MU-MIMO dual-band standards along with 4 Gigabit Ethernet connections. It is available in Europe and Australia for a recommended price of AUD$529, EUR€299 or GBP£269. The American press were moaning that they didn’t get this modem router first but they work on a service provisioning method very different to Europe and Australasia where self-install or BYO-modem provisioning of DSL based services is the norm.

D-Link have fielded some home-network hardware in the form of the DIR-885L router which supports 4×4 MU-MIMO AC3150 for its Wi-Fi functionality. They even fielded a USB Wi-Fi network adaptor which can allow any computer to work with an 802.11ac Wi-Fi wireless network. This device’s best-case abilities is to work with Wi-Fi network segments up to 3×3 MIMO AC1900 standards.

AVM Fritz!Box 6820 LTE “Mi-Fi”

AVM has been very productive with its home-network hardware although this has been very much “in the comfort zone” with existing technology. They have launched the Fritz!Box 4020 which is a small Internet gateway with an N300 dual-stream single-band Wi-Fi access point along with the Fritz!Box 7430 VDSL Internet gateway that has an N450 three-stream single-band Wi-Fi access point. They also launched the Fritz!Box 6820 which is a “Mi-Fi” that can work with LTE mobile-broadband services and implements 802.11n Wi-Fi and a Gigabit Ethernet connection on the LAN side.

AVM Fritz!Powerline 1220 – AVM enters the HomePlug AV2 fray

They have bought in to the HomePlug AV2 MIMO arena by offering the Fritz!Powerline 1240E HomePlug wireless access point along with the Fritz!Powerline 1220E HomePlug adaptor with pass-through AC outlet. This is in conjunction with the Fritz!WLANRepeater 1160 which is a dual-band Wi-Fi repeater.

Devolo haven’t been quiet lately. Here, they are pitching custoem HomePlug-based powerline solutions including HomePlug access points to ISPs and telcos so they can provision these devices to customers for optimum Wi-Fi coverage. They intend to sell these solutions more likely on an OEM basis. As well, they have launched the dLAN 550 WiFi which is a HomePlug AV500 wireless access point that can establish a single-band N300 Wi-Fi segment. They also used this show to exhibit their existing dLAN 1200 HomePlug AV2 hardware including the dLAN 1200+ WiFi AC which is a wireless access point that answers to the HomePlug AV2 MIMO and 802.11ac 2×2 MIMO Wi-Fi.

Next I will be talking about the home-entertainment trends that are expected to cover Europe and Australasia such as the ultra-high-resolution TV and networked audio. Stay tuned!

Part 1 – Personal Computing Trends

Part 2 – Wearables and the Home Network

Part 3 – Home Entertainment

Part 4 – Home Automation and the Internet Of Things

Product Page

Netgear WN3000RP

My Comments

There has been some increased Internet publicity about Netgear’s WN3000RP “universal range extender” which is intended to extend Wi-Fi coverage in to a network’s dead spot. Devices like this one are billed as being able to work with any 2.4GHz Wi-Fi network segment such as an ISP-supplied “Internet-network edge” wireless router.

But these devices work in a particular manner that may cause problems with network use. Here, they work as a wireless client bridge to the existing network and set themselves up as a Wi-Fi access point that is its own “extended service set” or Wi-Fi network segment. Most of these devices will typically have an Ethernet connection for use with Ethernet-ended network devices like PCs, network printers or games consoles and work as a Wi-Fi client bridge for these devices.

What can go wrong

Positioning in the wireless network

There is infact a lot that can go wrong in setting up and using these devices. One issue is how the device is positioned in the master wireless segment that is to be extended. You have to locate these devices just off the fringe of that wireless segment in order to avoid unreliable service from the client devices on both network segments. Usually, you would have to keep an eye on two indicator lights – one which shows reception quality relative to the master wireless segment and one which shows the quality of the wireless segment created by the device.

Operation of Wi-Fi client devices

As well, users will need to make sure that their laptop computers, smartphones or other devices point to the SSID associated with the range extender. In the case of the Netgear device that is set up using WPS to the “master segment”, the SSID will be a combination of “master_segment_SSID” + “_EXT”; like “BIGPOND-1234_EXT” for a hypothetical Telstra-supplied Wi-Fi router whose SSID is “BIGPOND-1234”. Of course, the WPA security parameters will be the same as that for the “master segment”. It may also require users to make sure their devices “latch on” to the SSID that is strongest for the area they are in; which may be a problem with laptop computers running some desktop operating systems; or some network devices like some Internet radios.

Bandwidth availability and advanced Wi-Fi setups

Another factor that is also worth considering is that the data bandwidth available in this newly-created segment will be smaller that that available in the master segment due to the device working from a weaker point of the master segment. Of course, never expect these devices to offer advanced network behaviour like client isolation for use with hotspots or support for multi-SSID access points for example. With the latter example, these devices will only work with one of the SSIDs available from these access points.

WPS network setup

A key point of confusion that can occur with Netgear’s wireless range extenders is the way the WPS “push-to-connect” function works. These devices have one WPS button on their control surface, which handles associating with the “master segment” or associating with a client device on its own segment. When you set up the range-extender for the first time with a WPS-enabled access point or router on the master segment, you are meant to press this button on this range extender to start the WPS cycle then press the button on the WPS-enabled access point to complete the process. Then you enroll a WPS-capable client device on this range extender’s segment by starting the WPS-configuration process on that device then pressing the WPS button on this range extender. What can happen is that a person who is enrolling the client device could press the button on the range extender before starting the WPS-setup process on the client and this could make the device assume it is connecting to another master segment rather than enrolling the new client.

What could be done to make these devices better

Firmware that suits multi-function operation

Of course the current firmware with these devices prohibits using them as a “pure” Wi-Fi access point with a wired backbone to the network. This is although they work properly as an access point for the new segment with the Wi-Fi “master segment” as their backbone. Rather, I would prefer that these devices have a “multi-function” firmware in place which allows at least three operation modes: a wireless range extender with one wireless segment as the backbone and another covering the area; a wireless access point with a wired backbone; and a wireless client bridge serving Ethernet-connected devices.

Improved designs could use a hardware switch that selects between the operation modes. This can then lead to a logical foolproof WPS operation mode with the WPS button only used for enrolling client devices in modes other than “Client Bridge” whereupon it would be used to enrol with the master segment. The user would be required to set the unit to “Client Bridge” mode when the want to establish a wireless backbone, then set the unit to “Range Extender” mode for operation as a range extender with a distinct satellite segment.

Improved WPS operation

Similarly, these devices could have improved WPS-button logic such as a “long press” for setup with a master segment and a “short press” for client setup. This can avoid further operation complications due to someone who intends to enrol a client device causing these range extenders to “hunt” for new master segments and affecting access to the network by established devices.

Conclusion and my opinion on these devices

If I was to extend the coverage of a wireless network segment, I wouldn’t necessarily use the wireless backbone method that is encouraged with these devices. Instead I would use access points run off a wired (Ethernet or HomePlug AV) backbone. This would then make sure that there is the full bandwidth available across the coverage of the network

Now we come to the issue of network-infrastructure equipment that will need to support the increasing demands placed on the home network by the previously-mentioned smartphones, tablet computers and Internet-enabled TVs.

Network Infrastructure

Network Connectivity

Some newer chipsets have appeared which will increase network bandwidth for the 802.11n Wi-Fi segment and the HomePlug AV segment. The current implementations may use manufacturer-specific implementations which won’t bode well with the standards.

The first new “call” is the 450Mbps 802.11n WPA2 WPS Wi-Fi segment which is being provided by most network makes for their midrange routers and access points. Access points and routers that work with this specification use three 802.11n radio streams to maintain the high throughput. The full bandwidth may be achieved if the client device is equipped with an 802.11n wireless network adaptor that supports the three streams but your existing devices may benefit due to reduced contention for the wireless bandwidth due to the access point / router offering three streams.

Most of the routers shown at the Consumer Electronics Show this year that support the 3-stream 450Mbps level for the 802.11n wireless network functionality also offered dual-band dual-radio operation to the same specification. Here, these devices could work on both the 2.4GHz band and the 5GHz band at this level of performance.

Some manufacturers were trying out the idea of a 60GHz high-bandwidth media network which may be based on a Wi-Fi (802.11 technology) or other proprietary scheme. This could lead to three-band multimedia routers and access points that use 2.4GHz and 5GHz for regular whole-home wireless networking and 60GHz for same-room wireless networking.

The second new “call” is the 500Mbps throughput being made available on high-end HomePlug AV devices. These powerline network devices may only achieve the high bandwidth on a segment consisting of the high-bandwidth devices that are based on the same chipset. Here, I would wait for the HomePlug AV2 standard to be fully ratified before you chase the 500Mbps bandwidth on your HomePlug segment. Of course, these devices can work with HomePlug AV segments.

The third new call is for midrange high-throughput routers to have Gigabit on the WAN (Internet) port as well as the LAN ports. This is more relevant nowadays as fibre-based next-generation broadband services are rolled out in most countries.

Everyone who exhibited network-infrastructure equipment offered at least one 450Mbps dual-band dual-radio router with Gigabit Ethernet on the WAN (Internet) connection as well as the wired-LAN connection. As well, most of these routers are equipped with circuitry that supports QoS when streaming media and some of them have a USB file-server function which can also provide media files to the DLNA Home Media Network.

Trendnet also offered an access point and a wireless client bridge that worked to this new level of 802.11n performance. They also demonstrated power-saving circuitry for Wi-Fi client devices which throttles back transmission power if the device is in the presence of a strong access point signal for their network. This was ostensibly to be “green” when it comes to AC-powered devices but would yield more real benefit for devices that have to run on battery power.

They also ran with the TPL-410AP which is a HomePlug AV Wireless-N multi-function access point. Another of those HomePlug access points that can “fill in the gap” on a wireless network or extend the Wi-Fi network out to the garage, barn or old caravan.

They also issued the TEW-656BRG 3G Mobile Wireless N Router, which is an 802.11n “MiFi router” that is powered by USB and works with most 3G / 4G modem sticks available in the USA. It is of a small design that allows it to be clipped on to a laptop’s lid or a small LCD monitor.

TP-Link had their 450Mbps three-stream dual-band dual-radio router with Gigabit on bot WAN and LAN Ethernet connections. As well they fielded a single-stream 150Mbps USB stick as the TL-WNT23N.

They also tried their hand with IP surveillance with the TL-SC4171G camera . This camera can do remote pan-tilt, and 10x digital zoom. It connects to the network via Ethernet or 802.11g Wi-Fi (not that much chop nowadays) and is equipped with an IR ring for night capture, as well as a microphone and speaker.

Netgear were more active with the 450Mbps three-stream routers with Gigabit LAN. Two of the models are broadband routers with Gigabit WAN, while one is an ADSL2 modem router which I think would serve the European and Australian markets more easily. The top-end model of the series has a USB file server function which works with the DLNA Home Media Network and also with Tivo “personal-TV devices”.

They also released the XAV5004 HomePlug AV switch which is the 500Mbps version of the their earlier “home-theatre” four-port HomePlug switch. Of course, they released the XAV2001 which is a compact “homeplug” adaptor which connects to the regular standards-based HomePlug AV segment.

They also have released the MBR1000 Mobile Broadband Router which works with 3G/4G wireless broadband or  Ethernet broadband. This unit is being provided “tuNrnkey” for Verizon’s new 4G LTE service.

Netgear have also fielded the VEVG3700 VDSL2/Gigabit Ethernet dual-WAN router with Gigabit Ethernet LAN, Cat-IQ DECT VoIP phone base station. This device, which is pitched at triple-play service providers also supports DLNA server functionality. As well, they also had a DECT VoIP kit available for these providers

As well, Netgear have tried their footsteps in to IP-surveillance for home and small business with a camera and an Android-driven screen for this purpose.

D-Link’s network hardware range include the three-stream 450Mbps routers with Gigabit WAN/LAN, a multifunction access point / repeater for the 802.11n network as well as a new DLNA-enabled network-attached storage range

As far as the MoCA TV-coaxial-cable network is concerned, Channel Master is the only company to release any network hardware for this “no-new-wires” network. It is in the form of a MoCA-Ethernet 4-port switch for the home theatre.

“Mi-Fi” wireless-broadband routers

Every one of the US cellular-telecommunications carriers are catching on to the 4G bandwagon not just with the smartphones and tablets but with the wireless-broadband routers.

Sprint have a unit for their WiMAX service while Verizon are fielding a Samsung LTE “Mi-Fi” as well as the aforementioned Netgear MBR1000 router.

Computer hardware and software

Monitors

Some of the companies who manufacture monitors are looking at the idea of “Internet-connected” monitors which have a basic Web browser in them so you don’t have to fire up a computer to view the Web.

CPU/GPU combo chips

These new processor chips combine a CPU which is a computer’s “brain” as well as the graphics processor which “draws” the user interface on to the screen. AMD and Intel were premiering the “Accelerated Processor Units” and the Core “Sandy Bridge” prcessors respectively at the CES this year.

Intel were trumpeting the fact that this technology could make it harder to pirate movie content but this is more about mainstream computing and small-form-factor hardware being behind this space and power saving processor hardware.

Sony had lodged a commitment to AMD to use the Zacate “Accelerated Processor Unit” in some of their VAIO laptops.

Other hardware

AMD haven’t forgotten the “performance computing” segment when it comes to processor chips and released the quad-core and 6-core “Phenom” desktop and gaming-rig CPUs.

Seagate have also made the “GoFlex” removable / dockable hard disks a standard by building alliances with third-parties to make hardware that works to this standard. Could this be another “VHS-style” alliance for dockable hard disks?

Microsoft also used this show to premiere their Touch Mouse which uses that same touch operation method as Apple’s Magic Mouse. Do I see an attempt for them to “snap at” Apple when it comes to “cool hardware” as well as software?

The Microsoft Platform

There has been some activity with the Microsoft Windows platforms now that set-top boxes and tablet computers are becoming the “order of the day”

One direction Microsoft is taking is to port the Windows Platform, which was primarily written for Intel-Architecture processors, to the Acorn ARM-architecture processors. The reason that this port is taking place is due to these energy-efficient RISC processors being commonly used in battery-driven applications like tablet computers. They are also popular with other dedicated multimedia devices like set-top boxes and TV applications.

As well, Microsoft will be working on a lightweight Windows build for TV applications like set-top boxes. This is although they have previously written Windows-CE builds for this class of device.

Microsoft also want to make a variant of the Windows Phone 7 for tablet computers and are starting work on the Windows 8 project.

Similarly, Somsung has demonstrated the second incarnation of the Microsoft Surface platform This one comes in a slimmer table-based form rather than a unit that is as thick as the 1980s-style “cocktail-table” arcade game machine.

Conclusion

The Consumer Electronics Show 2011 has certainly put the connected home on the map. This is due to affordable smartphones and tablet computers becoming more ubiquitous and Internet-provided video services becoming an increasing part of American home life.

It will be interesting to see what will happen for the other “pillar” of the consumer-electronics trade fair cycle – the Internationaler Funkaustellung; and how more prevalent the Internet TV, smartphone and tablet computer lifestyle will be in Europe and Asia.

News article

NETGEAR Adds Gigabit PoE Smart Switch – SmallNetBuilder

From the horse’s mouth

NETGEAR GS110TP Gigabit PoE switch product page

NETGEAR GS-110TP Gigabit PoE 8 Port Smart Switch

My comments

The concept of VLANs and quality-of-service functionality is now become increasingly relevant to the home and small-business network now that the “single-pipe triple-play” and “next-generation” broadband Internet services are either here in your market or are coming around the corner to your market.

What are VLANs

The VLAN is a separate logical network path within a physical network medium, such as multiple SSIDs from one Wi-Fi access point serving different networks or a HomePlug setup with multiple Network Passwords for different networks. Most business-grade Ethernet switches offer this functionality in order to have particular Ethernet sockets associated with particular logical networks. It is used in many network applications such as interlinking a business with multiple premises through one multi-tenant building or providing Internet-only “guest access” service to business networks.

Now the VLAN is becoming common in small networks as part of either providing “guest access” or “hotspot service” to the Internet without encroaching on the security of the resident network; or providing dedicated “fast-lanes” for quality of service when it comes to A/V streaming or VoIP service.

NETGEAR’s role in this equation

Now NETGEAR have provided the GS110TP Gigabit Power-Over-Ethernet Smart Switch which is an 8-port switch which offers this functionality and Power-Over-Ethernet to all the ports for US$260. This is similar to how this company offered 5-port and 8-port 10/100Mbps Cat5 Ethernet hubs and switches at prices affordable for most people when the idea of home networking and broadband Internet came on the horizon in the early 2000s. Then a few years later, they offered 8-port 10/100Mbps switches with that had 802.3af standards-based Power-Over-Ethernet supply functionality on four of the ports, again at a price that most users can afford.

It may be easy to think of this unit being a candidate “central” switch when you wire your premises for Ethernet and want to make it future-proof for these new requirements. There have been some concessions to allow it to work properly with “triple-play” by the use of a default VLAN matrix with one VLAN for regular traffic, one for VoIP and one for video traffic. There is some “automatic-transmission” logic that shifts data to the different VLANs based on whether the data was primarily multicast in the case of video or one of a few VoIP protocols in the case of VoIP.

The main problem with this is that this switch wouldn’t work in a “plug-and-play” manner with “edge” devices that use certain VLAN setups or QoS methods to assure video and VoIP quality-of-service. For example, most of the “n-boxes” (Livebox, Neufbox, Freebox, Bbox, etc) used by French “triple-play” service providers as network-Internet edges have one Ethernet port for video traffic and three Ethernet ports for regular traffic. These units would expect you to connect the IPTV box to the “video” Ethernet port and you may end up with QoS or installation difficulties if you used this switch with them.

Limitations with this class of switch

For these switches to become easier to implement in a home or small-business network, there would have to be standards that allow an “edge” device to communicate its QoS and VLAN needs to these switches. This may be important if the “edge” device is managed by the service provider or is part of the provisioning chain that a service provider uses.

This may also include the flexible installation and “at-will” relocation of devices like VoIP handsets or IPTV devices as well as the support for multiple devices of this type across an Ethernet backbone. It also includes the support of multiple cascaded switches such as “regional” switches in other parts of the building or other buildings.

Other benefits to take note of

One bonus that I like about this switch is that it has offered 802.3af-compliant Power-Over-Ethernet across all Ethernet ports which allows the Ethernet cable to be a power cable as well as a data cable.This technology, which I will cover in a separate article on this site, has been pitched at business networks as being suitable for powering Wi-Fi access points, VoIP telephone handsets and IP-based surveillance cameras with one cable and from one point. Infact, NETGEAR have released an 8-port “regional” smart switch that has similar QoS and VLAN functionality but can be powered from this switch or other standards-based Power-Over-Ethernet networks.

Another feature that also appealed to me about this switch is that a unit of this price was equipped with optical-fibre LAN connectivity which can reduce the cost of using optical-fibre as a high-reliability long-distance link between buildings, especially on large properties. 

Conclusion

This is another example of NETGEAR offering technology that is deemed “large business” at prices that home users and small business can afford.

Originally posted: 5 January 2009, Updated 6 July 2009

Very often, DLNA and UPnP AV are typically marketed as being for use in the home due to the reduced amount of configuration needed for devices that comply to these standards. But devices based on these standards can appeal to business use, especially to small “mum and dad” shops, community / religious organisations and other similar businesses who don’t have regular access to “big business” IT resources.

The functionality is typically available as low-cost or free software or, in some cases like Windows XP and Vista, available as part of the operating system. There are some “business-grade” network-attached storage boxes that have the functionality for business continuity as well as the ability to work as DLNA-compliant media servers. A good example of this are the Netgear ReadyNAS units and the QNAP units, including the TS-459U Series 4-disk rackmount “pizza-box” NAS server which would be pitched at the office server room.

The main issue that one will have with this kind of setup will be that the network that you intend to connect the equipment on must be on the same subnet or logical network, served by the same DHCP server. This will be fine for most small-business, and SOHO networks, including the “private” segment of networks that provide Internet access to the public such as wireless hotspots and Internet cafes.

If you are concerned about security of business data or the integrity of business systems, you could run a separate server for the DLNA-presented media data rather than use the main server for this purpose. Then you can lock down the main server as tightly as it should be for the data.

Visual Merchandising

DLNA-based setups can come in to their own when it comes to all sorts of visual merchandising applications. This is more so for small businesses who cannot afford to buy business-grade “digital signage” or find the “digital signage” difficult to manage due to complex setup requirements.

You can have images or videos of products that are always kept fresh and up-to-date and can intermingle these images and videos with up-to-date “electronic signage” that you create with programs like Microsoft PowerPoint. The best example of this being used would be the real-estate agent who uses the setup to show pictures of the houses he has currently for sale or a beauty salon showing examples of the most fashionable hairstyles they have done lately.

A DLNA-compliant network electronic picture frame like the Kodak EX1011 or the D-Link DSM-210 can work wonders here as can any DLNA-compliant network media receiver (or games console) hooked up to a large flat-screen TV or monitor. Similarly, a DLNA-compliant flat-screen TV like one of Sony’s recent LCD TVs can fulfil the same needs here, especially now that the cost of these sets in in affordable territory and the sets are available from most electrical retailers.

The media server can be part of the file server’s functions or can be hosted on a separate box such as a network-attached storage unit. You just need to add the media to this server by using a standard network file-transfer protocol like SMB or FTP.

You will need to make sure that the media server presents the files either by keywords (tags) and / or folders of the file system so that you can file the pictures how you want to file them. Windows Media Player and TwonkyMedia do support working by keywords and folders.

If you use a presentation program like Microsoft PowerPoint to create “electronic signage”, you just need to export all of the slides in your presentation as JPEG files in to a folder available to the media server. This is done in PowerPoint by opening the presentation and selecting “File” – “Save As” and selecting “JPEG” as the file type. You then have the option of exporting the current slide as a JPEG or exporting all the slides in the presentation as JPEG files in a folder named after the title of the presentation.

Background Music

If you are sick and tired of the radio or those business-to-business music services, you can use a computer as a music server, with the music playing out through a DLNA-compliant network media player such as one of those Internet radios.

As I have mentioned in my previous DLNA feature articles, it is very easy to do whether you decide to use a computer or a network-attached storage box as a media server. Most of the network-enabled music players support shuffle-play which can be very useful for this application and a lot of them have a line-out connection so you can connect them to a public-address amplifier or music-on-hold interface.

Education – The media library

A DLNA-based media system can work well when it comes to education. It doesn’t matter whether the idea is to show a video to a class or whether a student is viewing a video they saw in class “once more” in the library.

A capable DLNA media server with a properly-indexed media collection can work wonders here, with the users selecting the AV material through the DLNA media player’s user interface. Most such players can connect to existing AV equipment or the DLNA functionality can be part of the equipment’s functionality.

Similarly, if the media server provides it, you could allow Web-based access via any computer connected to the facility’s network. This can allow wireless-linked computers to be used to “pull up” the learning resources.

Other business-based DLNA applications

DLNA is eventually heading in the direction of a common IP-hosted data system for transferring media between portable and fixed devices. A typical application may include uploading images and movies from a digital camera or camcorder to a “base” computer for editing and viewing. Similarly, there may be the application of downloading AV material from a computer to a smartphone so it can be viewed on that phone’s display.

Conclusion

What needs to happen is that DLNA needs to be viewed as not just being for the home but being for business and educational life as well.

Sneak Peek: Netgear EVA9000 Digital Entertainer Elite | eHomeUpgrade

Posted using ShareThis

My comments

Now Netgear is raising the bar as far as these network media receivers is concerned. It is an attempt to provide a UPnP-complint high-end network media receiver for those of us who want to bring the video files held on the NAS unit to the home theatre that has the big plasma screen and surround-sound.

The built-in hard disk option could be improved upon in the form of being able to be a UPnP AV / DLNA media server. This can then lead to the unit being an entry-point media server or supporting the provision of “load ‘n’ show” media being available on other DLNA media devices in the home network. This is if the purpose of the optional hard disk isn’t just for downloading content as part of an rental-based or subscription video-on-demand service. Another ideal function would be to be under the control of another UPnP AV control point, whih can allow it to play audio content without the user needing to have the TV on to choose the content.

It will be interesting to see what the reviews in the computer press and the blogosphere think of this unit and its usability.