Tag: TP-Link

TP-Link jumps in to Wi-Fi meshing with HomePlug AV2 backhaul

Articles (Product Reviews on other Websites)

TP-Link Deco P9 distributed Wi-Fi kit with HomePlug AV2 powerline backhaul press image courtesy of TP-Link

TP-Link Deco P9 distributed Wi-Fi kit with HomePlug AV2 backhaul

TP-Link Deco P9 mesh router review: blanket your whole home in speedy Wi-Fi | T3

TP-Link Deco P9 Powerline Mesh WiFi System Review – Blacktubi

From the horse’s mouth

TP-Link

Deco P9 Wi-Fi / HomePlug AV powerline Mesh Network set (USA Product Page)

My Comments

A problem with most distributed-Wi-Fi setups is that certain building materials and construction techniques can reduce their performance. Examples of this include where an extension is built on to a house that has double-brick or sandstone walls, or you have foil-lined insulation or metai-based window tinting as an energy-saving measure.

Here, your distributed-Wi-Fi system may support Cat5 Ethernet as a backhaul option in lieu of Wi-Fi wireless technology. But you may find problems with, for example, having Cat5 Ethernet pulled through the double-brick wall. Or you simply are renting your premises and cannot easily have additional wiring installed there.

You would then have to consider using HomePlug AV2 powerline technology to create a wired backbone for your setup. Most setups would require you to buy a pair of “homeplugs” which simply bridge the powerline network segment to a Cat5 Ethernet segment and use these devices to create that wired backhaul. Only a handful of manufacturers have dabbled in the idea of mixing HomePlug-based powerline technology and distributed Wi-Fi technology at the moment.

TP-Link Deco P9 Homeplug AV2 distributed Wi-Fi operation diagram courtesy of TP-LinkAVM offered a firmware upgrade for their Fritz! devices including their Fritz!Powerline HomePlug adaptors and access points for this purpose. Here, you could manage the distributed Wi-Fi network through your Fritz!Box Web management interface and this exploited the different backhaul options like Wi-Fi, Ethernet or HomePlug powerline that the devices offered.

Now TP-Link has implemented Wi-Fi 5 and HomePlug AV2 1000 to create a credible flexible distributed-Wi-Fi setup. This system, known as the Deco P9, can work with other TP-Link Deco distributed Wi-Fi devices using the best Wi-Fi backhaul or, where applicable, Ethernet or HomePlug AV powerline wired backhaul that the device offers. It does combine the wired and wireless technologies for use as a wider-bandwidth backhaul or as a failover measure.

One of these review articles said that the HomePlug setup offered by the TP-Link Deco P9 system excelled when it came to latency which they considered for gaming use cases. The other review described the P9 system as being fit for purpose with houses that have cellars and garages, more as a way to do away with those range extenders. I would add this this as being fit for extending Internet to bungalows, granny-flats, converted garages or similar outbuildings that have AC wiring to the main house — the HomePlug AV2 technology may do this job better due to its increased robustness. This kit’s use of HomePlug AV2 technology may even come in to its own with that static caravan or campervan used as a sleepout and connected to the main house by AC wiring.

Cable TV in the man-cave

.. and may work well for that man-cave garage or barn

More companies could come on board with distributed-Wi-FI devices that use HomePlug AV2 MIMO technology as a backhaul option to answer these needs. Similarly, they could offer HomePlug AV2 adaptors that can work in tandem with their distributed Wi-Fi devices that offer Ethernet as a backhaul option.

At least there is another company offering HomePlug powerline network connectivity as a wired backhaul option for their distributed Wi-Fi setups.

At last a HomePlug wireless access point that simplifies the wireless network extension process

Article – From the horse’s mouth

TP-Link

TL-WPA4220 – Welcome to TP-LINK (Product Page)

My Comments

One main reason most of us would buy a HomePlug-based wireless access point is to extend the coverage of that Wi-Fi wireless network past that radio obstacle like the double-brick interior wall without needing to pull new cabling. Or you don’t want to butcher your garden or dig up your lawn so you can reliably extend your home network with its Wi-Fi wireless segment to that garage or bungalow.

But a setup hurdle that one can easily end up with is copying the SSID (wireless network name) and network security parameters from your existing wireless router to the access point and making sure these are accurately copied so you can have proper roaming operation for your wireless network.

TP-Link have made this simple through the use of a “Wi-Fi Clone” button on the TL-WPA4220 access point. Here, this access point uses the WPS-PBC “push-button” setup routine to learn the parameters associated with your small wireless network segment.

This procedure has to be performed with this HomePlug access point in good Wi-Fi range of a router or access point that implements WPS push-button setup.You push the WPS button on your suitably-equipped wireless router as if to enrol a new device to your home network, then push the “Wi-Fi Clone” button to complete the procedure. This means that the access point has what is needed to be part of the Extended Service Set which is you home network’s Wi-Fi segment.

From that point on, you just simply establish that HomePlug AV powerline segment as the backbone for your wireless network and benefit from the increased coverage. But I would personally have this access point equipped with the WPS client setup mode for enrolling client devices close to it to avoid the need to traipse back to your wireless router to enrol that Android smartphone or Internet radio that is to be used in the remote area.

What I see of this is that steps have been taken in the right path to move away from the so-caled “range extenders” towards a more reliable and proven method of extending a wireless network’s coverage by simplifying the tasks required for achieving this goal.

Consumer Electronics Show 2012–Part 3

Network Technology

There are a few major trends that I have noticed for the home and small-business network at this year’s Consumer Electronics Show. But the big names like D-Link and NETGEAR had chosen to run private showings of their products in the many hotels around Las Vegas rather than use the Convention Center.

Wireless networking

The 802.11ac Gigabit wireless network standard has been ratified and a lot of the manufacturers are showing prototype chipsets and endpoint devices for networks based on this standard. TRENDNet had shown a router and a client bridge as a proof of concept for a wireless link on this standard and D-Link had registered interest in developing their 802.11ac implementation.

On the other hand, Belkin, D-Link and Engenius ran with premium “N900” routers as their top-shelf models. These are simultaneous dual-band routers that run three data streams on each of the two Wi-Fi bands with a total theoretical throughput of 450Mbps per band. 

As well, TRENDNet had tried their effort at another of those “universal Wi-Fi range extenders” which is a device class that could cause some mistakes.

Coaxial and Powerline Networking

MoCA have brought their TV coaxial-cable network specification up to 2.0 which allowed for a headline speed of 400Mbps with Broadcom showing a system-on-chip that works with this standard. They were pitching it at the set-top-box market, especially for multi-room cable-TV deployments.

On the other hand, HomePlug PowerLine Alliance have made the HomePlug AV2 specification official. This standard, which is interoperable with HomePlug AV powerline network segments can support MIMO / repeater operation for a robust powerline segment as well as allowing for a Gigabit physical-layer bandwidth for this segment. The former MIMO advantage makes it that each HomePlug AV2 node acts as a repeater and can take data from two or more nodes for higher throughput even with ropey mains circuits.

But there have been more of the HomePlug AV 500 devices being exhibited on the floor; including D-Link’s DIR-1565 “three-way” router which supports a network of 802.11g/n Wi-Fi, Gigabit Ethernet and HomePlug AV 500.

Also, the IEEE 1905.1 standard has been officialised thus simplifying the setup and management requirements for small networks that use Wi-Fi, Ethernet, HomePlug or MoCA network media or a combination thereof. It also provides a consistent quality-of-service arrangement for data that passes through the different network media.

Routers

Some of the manufacturers were pitching at the idea of “cloud-enabling” their routers. This was to allow for remote management of these devices or to allow the router to become an Internet-enabled file server. There was also some talk about setting up app platforms for routers, but what could this lead to for the evolution of these devices.

D-Link have launched the DIR-505 which is a 802.11g/n Wi-Fi plug-in travel router which also had the ability to work as an access point and file-server.

Network-Attached Storage

TP-Link had used this show to launch their first NAS unit which was a DLNA-capable 2-bay SATA unit with Gigablt Ethernet connectivity as well as 3 USB ports. It even had the ability to copy from USB to NAS at the touch of a button.

Iomega had refreshed their StorCenter NAS lineup by adding a surveillance-camera NVR functionality and making them easy to setup. This also included improving their cloud-storage functionality. They also introduced the EZ Media & Backup Center which was their entry-level home-user NAS which supported easy-setup operation and backup, iTunes / DLNA media serving and support for Iomega’s Personal Cloud and Iomega Link technology.

Broadband Internet

ViaSat, who provide the satellite backhaul for JetBlue’s inflight Internet service, were intending to launch a satellite broadband service for rural America this year. They wanted to use this show to exhibit their proposed service. This service is intended to be speed-competitive with the fastest terrestrial broadband services in the cities and is to be known as Exede.

The throughput is at a headline speed of 12Mbps download / 3Mbps upload and they are offering packages with monthly rates US$49.99 for 7.5Gb data allowance, US$79.99 for 15Gb data allowance and US$129.99 for 25Gb data allowance.

Conclusion

This year, the Consumer Electronics Show in Las Vegas was about estalishing a connected home lifestyle across all of the main activity centres ranging from the home office to the lounge area and that the TV is now a legitimate part of the connected lifestye.

Consumer Electronics Show 2011–Part 3

Now we come to the issue of network-infrastructure equipment that will need to support the increasing demands placed on the home network by the previously-mentioned smartphones, tablet computers and Internet-enabled TVs.

Network Infrastructure

Network Connectivity

Some newer chipsets have appeared which will increase network bandwidth for the 802.11n Wi-Fi segment and the HomePlug AV segment. The current implementations may use manufacturer-specific implementations which won’t bode well with the standards.

The first new “call” is the 450Mbps 802.11n WPA2 WPS Wi-Fi segment which is being provided by most network makes for their midrange routers and access points. Access points and routers that work with this specification use three 802.11n radio streams to maintain the high throughput. The full bandwidth may be achieved if the client device is equipped with an 802.11n wireless network adaptor that supports the three streams but your existing devices may benefit due to reduced contention for the wireless bandwidth due to the access point / router offering three streams.

Most of the routers shown at the Consumer Electronics Show this year that support the 3-stream 450Mbps level for the 802.11n wireless network functionality also offered dual-band dual-radio operation to the same specification. Here, these devices could work on both the 2.4GHz band and the 5GHz band at this level of performance.

Some manufacturers were trying out the idea of a 60GHz high-bandwidth media network which may be based on a Wi-Fi (802.11 technology) or other proprietary scheme. This could lead to three-band multimedia routers and access points that use 2.4GHz and 5GHz for regular whole-home wireless networking and 60GHz for same-room wireless networking.

The second new “call” is the 500Mbps throughput being made available on high-end HomePlug AV devices. These powerline network devices may only achieve the high bandwidth on a segment consisting of the high-bandwidth devices that are based on the same chipset. Here, I would wait for the HomePlug AV2 standard to be fully ratified before you chase the 500Mbps bandwidth on your HomePlug segment. Of course, these devices can work with HomePlug AV segments.

The third new call is for midrange high-throughput routers to have Gigabit on the WAN (Internet) port as well as the LAN ports. This is more relevant nowadays as fibre-based next-generation broadband services are rolled out in most countries.

Everyone who exhibited network-infrastructure equipment offered at least one 450Mbps dual-band dual-radio router with Gigabit Ethernet on the WAN (Internet) connection as well as the wired-LAN connection. As well, most of these routers are equipped with circuitry that supports QoS when streaming media and some of them have a USB file-server function which can also provide media files to the DLNA Home Media Network.

Trendnet also offered an access point and a wireless client bridge that worked to this new level of 802.11n performance. They also demonstrated power-saving circuitry for Wi-Fi client devices which throttles back transmission power if the device is in the presence of a strong access point signal for their network. This was ostensibly to be “green” when it comes to AC-powered devices but would yield more real benefit for devices that have to run on battery power.

They also ran with the TPL-410AP which is a HomePlug AV Wireless-N multi-function access point. Another of those HomePlug access points that can “fill in the gap” on a wireless network or extend the Wi-Fi network out to the garage, barn or old caravan.

They also issued the TEW-656BRG 3G Mobile Wireless N Router, which is an 802.11n “MiFi router” that is powered by USB and works with most 3G / 4G modem sticks available in the USA. It is of a small design that allows it to be clipped on to a laptop’s lid or a small LCD monitor.

TP-Link had their 450Mbps three-stream dual-band dual-radio router with Gigabit on bot WAN and LAN Ethernet connections. As well they fielded a single-stream 150Mbps USB stick as the TL-WNT23N.

They also tried their hand with IP surveillance with the TL-SC4171G camera . This camera can do remote pan-tilt, and 10x digital zoom. It connects to the network via Ethernet or 802.11g Wi-Fi (not that much chop nowadays) and is equipped with an IR ring for night capture, as well as a microphone and speaker.

Netgear were more active with the 450Mbps three-stream routers with Gigabit LAN. Two of the models are broadband routers with Gigabit WAN, while one is an ADSL2 modem router which I think would serve the European and Australian markets more easily. The top-end model of the series has a USB file server function which works with the DLNA Home Media Network and also with Tivo “personal-TV devices”.

They also released the XAV5004 HomePlug AV switch which is the 500Mbps version of the their earlier “home-theatre” four-port HomePlug switch. Of course, they released the XAV2001 which is a compact “homeplug” adaptor which connects to the regular standards-based HomePlug AV segment.

They also have released the MBR1000 Mobile Broadband Router which works with 3G/4G wireless broadband or  Ethernet broadband. This unit is being provided “tuNrnkey” for Verizon’s new 4G LTE service.

Netgear have also fielded the VEVG3700 VDSL2/Gigabit Ethernet dual-WAN router with Gigabit Ethernet LAN, Cat-IQ DECT VoIP phone base station. This device, which is pitched at triple-play service providers also supports DLNA server functionality. As well, they also had a DECT VoIP kit available for these providers

As well, Netgear have tried their footsteps in to IP-surveillance for home and small business with a camera and an Android-driven screen for this purpose.

D-Link’s network hardware range include the three-stream 450Mbps routers with Gigabit WAN/LAN, a multifunction access point / repeater for the 802.11n network as well as a new DLNA-enabled network-attached storage range

As far as the MoCA TV-coaxial-cable network is concerned, Channel Master is the only company to release any network hardware for this “no-new-wires” network. It is in the form of a MoCA-Ethernet 4-port switch for the home theatre.

“Mi-Fi” wireless-broadband routers

Every one of the US cellular-telecommunications carriers are catching on to the 4G bandwagon not just with the smartphones and tablets but with the wireless-broadband routers.

Sprint have a unit for their WiMAX service while Verizon are fielding a Samsung LTE “Mi-Fi” as well as the aforementioned Netgear MBR1000 router.

Computer hardware and software

Monitors

Some of the companies who manufacture monitors are looking at the idea of “Internet-connected” monitors which have a basic Web browser in them so you don’t have to fire up a computer to view the Web.

CPU/GPU combo chips

These new processor chips combine a CPU which is a computer’s “brain” as well as the graphics processor which “draws” the user interface on to the screen. AMD and Intel were premiering the “Accelerated Processor Units” and the Core “Sandy Bridge” prcessors respectively at the CES this year.

Intel were trumpeting the fact that this technology could make it harder to pirate movie content but this is more about mainstream computing and small-form-factor hardware being behind this space and power saving processor hardware.

Sony had lodged a commitment to AMD to use the Zacate “Accelerated Processor Unit” in some of their VAIO laptops.

Other hardware

AMD haven’t forgotten the “performance computing” segment when it comes to processor chips and released the quad-core and 6-core “Phenom” desktop and gaming-rig CPUs.

Seagate have also made the “GoFlex” removable / dockable hard disks a standard by building alliances with third-parties to make hardware that works to this standard. Could this be another “VHS-style” alliance for dockable hard disks?

Microsoft also used this show to premiere their Touch Mouse which uses that same touch operation method as Apple’s Magic Mouse. Do I see an attempt for them to “snap at” Apple when it comes to “cool hardware” as well as software?

The Microsoft Platform

There has been some activity with the Microsoft Windows platforms now that set-top boxes and tablet computers are becoming the “order of the day”

One direction Microsoft is taking is to port the Windows Platform, which was primarily written for Intel-Architecture processors, to the Acorn ARM-architecture processors. The reason that this port is taking place is due to these energy-efficient RISC processors being commonly used in battery-driven applications like tablet computers. They are also popular with other dedicated multimedia devices like set-top boxes and TV applications.

As well, Microsoft will be working on a lightweight Windows build for TV applications like set-top boxes. This is although they have previously written Windows-CE builds for this class of device.

Microsoft also want to make a variant of the Windows Phone 7 for tablet computers and are starting work on the Windows 8 project.

Similarly, Somsung has demonstrated the second incarnation of the Microsoft Surface platform This one comes in a slimmer table-based form rather than a unit that is as thick as the 1980s-style “cocktail-table” arcade game machine.

Conclusion

The Consumer Electronics Show 2011 has certainly put the connected home on the map. This is due to affordable smartphones and tablet computers becoming more ubiquitous and Internet-provided video services becoming an increasing part of American home life.

It will be interesting to see what will happen for the other “pillar” of the consumer-electronics trade fair cycle – the Internationaler Funkaustellung; and how more prevalent the Internet TV, smartphone and tablet computer lifestyle will be in Europe and Asia.