A Bluetooth audio adaptor that can run for 8 hours courtesy of LG

Article

LG outs diminutive Bluetooth headset with 8 hours of battery life

My Comments

I use the previously-reviewed Nokia BH-111 Bluetooth headphone audio adaptor with my Samsung Galaxy Note II Android smartphone so I can use a pair of ordinary headphones as a Bluetooth headset for that phone.

With this device, I can be able to get effectively a few hours of door-to-door music listening and perhaps a half-hour phone conversation out of this adaptor before it says it is out of battery life. But LG have upped the ante on these Bluetooth headphone audio adaptors by just releasing one that can have a net runtime of 8 hours before it needs charging. Like the Nokia BH-111, these will come with a pair of earphones but you could use any headphones, active speakers, line-level connection or cassette adaptor with them to convert the headphones to a Bluetooth headset or make a Bluetooth handsfree setup out of the active speakers or home / car music system.

Here, this could allow for service as an add-on in-vehicle handsfree that connects to a car stereo but can survive a long road trip, or to work with a pair of noise-cancelling headphones to entertain you through a long-haul flight. Even just spending the day out and about on the bike, walking long distances or making heavy use of public transport and having your smartphone play music through this device won’t have you worry about the device complaining of low batteries before you get home.

The same situation also extends to using the LG Bluetooth audio adaptor to work with TVs, home-theatre systems, games consoles and the like for a long viewing or gaming time without the fear of the audio adaptor or headset “giving out” in the midst of a game or movie. Of course, this device would work to the best with Bluetooth 3.0 setups and implement the aptX audio codec for best results with devices that support that codec.

It is also an example of the effort being put in to Bluetooth and other wireless technologies to have a device like this run for a long time in an interactive manner before it needs charging.

Foxtel to launch Play IPTV very soon

Article

Foxtel to kick-start Play tomorrow – Good Gear Guide by PC World Australia

My Comments

Foxtel is having to adapt their pay-TV setup to face the new connected reality. This is brought on with “cord-cutting” where people are less likely to continually subscribe to pay-TV; IPTV-based competing pay-TV services being offered by ISPs, telecommunications companies and other companies; as well as the younger market becoming more “flighty” and moving to different locations. It is in contrast to the traditional pay-TV view where the service is provided to the suburban household with a TV in the main viewing area connected to the pay-TV service via a cable connection or satellite dish using a set-top box and the service based on a long-term account.

Here, they are responding to this situation by offering the Foxtel Play IPTV service which is delivered without the need for a set-top box. This service works at the moment with the XBox 360 games console, the recent Samsung Smart TV as well as a Web-browser session for Windows and MacOS X regular-computer platforms.

The Foxtel Go “TV-Everywhere” package is offered as part of the equation, being able to run on iOS devices running iOS 5 onwards as well as Samsung Android devices running Android Jelly Bean 4.1 onwards.

The accounts will be offered “by the month” rather than a long-term contract to cater for a large range of situations. This encompasses situations such as “event-specific” viewing, occasionally-occupied houses and people with changing budgets and lifestyles.

At the moment, two accounts can gain access to the service at any one time with each account being able to be bound to three devices. But the system could be improved to cater for share-houses that have more than two people viewing concurrently.

The Foxtel Play platform would need to spread out beyond Samsung Smart TV to more smart-TV platforms especially Sony with their PS3 games console, It will also need to encompass the fact that some of the smart-TV platforms have this functionality on video peripherals like Blu-Ray players or network media players

Similarly, there could be provision to allow people who have a traditional set-top-box subscription to either create a “portable” IPTV account for viewing in other locations or convert to a “Play” IPTV account that mirrors their current package.

The services could be augmented by a collection of “on-demand” TV services that aren’t just a “catch-up” service. This could include hiring pay-per-view movies through the Foxtel Play infrastructure or simply subscribing to channels that primarily show content on an “on-demand” manner.

It is showing that the whole business model of pay-TV is not about an infrastructure-driven setup but about a service that is more “end-to-end” in an infrastructure-agnostic manner.

Gigaclear to provide competitive retail access to their fibre networks

Article

thinkbroadband :: Gigaclear partners with Fluidata to offer provider choice on network

My Comments

In the UK, a lot of small fibre-based networks are popping up in different country areas to offer real next-generation broadband to these areas. They are typically either a sole private effort or assisted by local or central government or even the local community.

But, unlike most next-generation broadband networks (including the National Broadband Network in Australia) and the ADSL broadband networks in most areas, there isn’t competitive access to the infrastructure. Here, it makes it hard for these markets to be approached with retail Internet service that competes on price or services offered.

Now, Gigaclear, whom I have been following on HomeNetworking01.info, have partnered with Fluidata to open their fibre-to-the-premises networks to other retail providers on a competitive-access model. This could allow a potential customer in Lyddington, Appleton or somewhere similar to benefit from a competitive tariff chart or sign up to a package that has “all the fruit” like VoIP telephony or IP-provided television.

There needs to be a platform for providing competitive access to infrastructure provided as part of any new next-generation-broadband project  This means that there is a company who looks after the infrastructure to the point of demarcation between the company’s responsibility and the customer’s responsibility at a customer’s installation.

But different companies can use this platform to provide a business or home customer access to the Internet using this infrastructure but in a competitive manner. Here, a customer then chooses which company provides an offer that best suits their needs and provides the best “bang for the buck”.

One could easily think that such a platform needs to be built or integrated at a later stage after the project is established but it is worth investigation any competitive-access systems as part of rolling out a next-generation Internet or rural-broadband-enablement project.

A mobile network-attached storage that is a server for USB flash drives and SD cards

Article – From the horse’s mouth

Sony

Sony announces new Portable Wireless Server : Consumer Products Press Releases : Sony Australia

Product Page (Worldwide)

My Comments

The Sony WG-C10N is like most other mobile network-attached storage devices in that it requires the mobile device to be effectively attached to its own wireless segment. Of course it can work as a bridge between an existing Internet-connected network and your device like most mobile NAS devices. As well, it requires the use of a mobile platform app or the use of a Web front for users to benefit from the data stored on the NAS using the Wi-Fi network.

This means that it can’t work with existing wireless home networks, nor can it support SMB/CIFS network file transfer that is common on regular computers nor can it serve audio-video content to DLNA-capable media devices.

But unlike the other mobile NAS devices that are on the market, this device works simply as a file server for attached SD cards or USB flash drives rather than using an integrated storage medium. This is more so for those of us who want to use higher-capacity memory cards or USB thumbdrives or have a collection of different SD cards / USB thumbdrives for different applications.

It also works as an SD card reader for those of you who don’t have an SD card slot in your computer or similar device (think of the Dell XPS 13 Ultrabook that I previously reviewed) to view or download your digital camera’s “film roll”. As well, it is one of the first “mobile NAS” devices that can serve as an external battery pack for your power-thirsty smartphone or tablet.

SanDisk comes to the mobile NAS market

Article

SanDisk Intros "Connect" Wireless Storage Product Line#xtor=RSS-181

From the horse’s mouth

SanDisk

Product Page

Connect Wireless Flash Drive

Connect WIreless Media Drive

My Comments

SanDisk have jumped on board the bus as far as mobile network-attached storage devices are concerned.

Here. they have released two devices but both of these devices are similar in functionality to the typical “mobile NAS” is concerned. They require that you connect your laptop, smartphone or tablet to their own wireless network but the SanDisk devices have a similar Internet-access “bridge” mode to what the previously reviewed Kingston mobile NAS has so you can benefit from another Wi-Fi network for Internet access. They also require you to install a manufacturer-designed app on your mobile device so you can get at or put files on these mobile NAS devices from your device’s control surface. There is also a Web front for gaining access to the files hosted on these devices from a regular computer.

Of course they have their limitations such as not supporting SMB/CIFS data transfer used by every regular-computer operating system or not supporting DLNA media-server functionality so you can “pull up” media stored on these devices on a smart TV or similar device. They don’t even allow you to link them to a regular small network so they can become a NAS for that network, which could come in handy if you use a “Mi-Fi” device on the road or simply annex it to your home network just to transfer data to and from the device.

There is a USB connection that is used for charging these devices from any USB AC charger, car charger or external battery pack as outlined in the “Gadget List – Essential Smartphone And Tablet Accessories” article. But this also is used for transferring data between a regular computer and these wireless NAS devices as if they are a USB memory key. You may end up with issues when it comes to connecting these devices to “non-computer” equipment like printers or Blu-Ray players because they may present themselves as multiple USB devices which is something that these “non-computer” devices don’t really tolerate as I have raised before.

The SanDisk Connect Wireless Media Drive also uses an SDXC slot so you can use it as a place to “dump” your digital-camera images if you start to “run out of film” on your digital camera. Then you can either use it as a backup system for your holiday’s worth of photos during that trip or take some of the pictures further by uploading them to Flickr or Facebook using your laptop, smartphone or tablet. It also has higher storage capacity options in the form of a 64Gb variant as well as the 32Gb variant.

Personally, I would like to see someone take these devices further and do things like support DLNA or SMB/CIFS or provide network “annexing” as an option so they can do more than just being on the road. If not, we could start to see a very stale class of product come of these devices.

Product Review–Sony VAIO Duo 11 slider convertible tablet (Model: SVT11215CGB)

Introduction

I am reviewing the Sony VAIO Duo 11 slider-convertible tablet computer which is a Windows 8 tablet computer that has a keyboard that slides from under the screen if you lift the back of the screen up.

There is a more expensive variant which has a faster processor and more capacity on the solid-state drive compared to the model I am reviewing.

Sony VAIO Duo 11 slider-convertible tablet

Price
– this configuration
RRP  AUD$1499
Form factor Slider convertible tablet
Processor Intel Core i5-3317U CPU extra cost
Intel i7-3517U CPU
RAM 4 Gb
Extra cost: 8Gb
shared with graphics
Secondary storage 128 Gb solid-state drive,
extra cost: 256 Gb solid-state drive
SDXC card / MemoryStick reader
Display Subsystem Intel HD 4000 integrated graphics
Screen 11” widescreen (Full HD) LED backlit LCD
Audio Subsystem Intel HD Audio
Audio Improvements Dolby Home Theater, Sony S-Master headphone amplifier
Network Wi-Fi 802.11a/g/n
Ethernet Gigabit Ethernet
Bluetooth Bluetooth 4.0 Smart Ready
Connectivity USB 2 x USB 3.0
Video HDMI, VGA
Audio 3.5mm stereo headphone jack
Authentication and Security Fingerprint readers, TPM
Sensors Touchscreen, NFC, accelerometer, gyro, digital compass
Operating System on supplied configuration Windows 8 extra cost:
Windows 8 Pro
Windows Experience Index – this configuration Overall: Graphics:
Advanced Graphics:
Insert variants with relative price shifts

The computer itsel

Aesthetics and Build Quality

Sony VAIO Duo 11 slider-convertible tablet computerThe Sony VAIO Duo 11 is a beautifully-designed slider convertible computer where the keyboard pulls up from under the touchscreen which also appears at an angle. It could have an identifying mark to guide users to lift the top upwards to slide out the keyboard because it can be confusing for first-timers to lift the bottom of the screen to pull out the keyboard.

The slider mechanism worked very smoothly even though I was dealing with a well-used demo / review-sample unit. As for a lightweight highly-portable computer, the VAIO had ticked the boxes for something that is able to be taken around and about be having a small footprint even when used as a keyboard as well as being lightweight enough to stow in a shoulder bag.

There was very little heat buildup when I watched video material on this computer due to the use of strategically-placed vents on the back of the tablet.

User Interface

The Sony VAIO Duo 11’s illuminated keyboard is large enough to comfortably touch-type on. This is of importance when you are using this unit to do something like live-blog or take notes for a significant amount of time.

But the keyboard area works as a trackpad along with a joystick in the middle of the keyboard. This doesn’t do a good job for fine navigation and a Bluetooth mouse would be an essential accessory for content creation.

The touchscreen does its job properly for coarse navigation and even works well with food-coated fingers that would be expected when you are using this unit in a Wi-Fi-hotspot cafe. Here, it is very responsive and accurate.

As for supplementary controls, the VAIO could also benefit from always-accessible controls for sound volume and “airplane mode”.

Audio and Video

Sony VAIO Duo 11 slider-convertible tablet - Right-hand-side view - 2 USB 3.0 ports and an HDMI port

Right-hand-side view – 2 USB 3.0 ports and an HDMI port

The Intel HD video display subsystem was very smooth and responsive for both regular desktop content and video content. The high-resolution setup can be a problem for desktop applications unless you configure the text display to magnify the text by 150% or zoom in oh the copy that you are typing.

As for the screen, it is very glossy but it is bright so you can see the content easily. The sound will be typical for a laptop and excels well for voice and sound effects. Headphones or external audio equipment would be of benefit for better sound quality.

Connectivity, Storage and Expansion

Sony VAIO Duo 11 slider-convertible tablet computer left-hand-side view - VGA port, memory card slots (SDXC and MemoryStick), audio output jack

Left-hand-side view – VGA port, memory card slots (SDXC and MemoryStick), audio output jack

The Sony VAIO Duo 11 has the full video complement for the old economy projector or the new HDTV by offering a VGA connector and an HDMI connector for either of these devices.

Sony VAIO Duo 11 slider-convertible tablet -Rear view - Power connection and clothespeg-style Ethernet connectio

Rear view – Power connection and clothespeg-style Ethernet connection

There are 2 USB 3.0 ports which would be enough for a USB memory key, USB wireless-broadband modem or a mobile printer. The VAIO also has a clothespeg-style Ethernet port like what the HP Envy 4 computers use, thus allowing you to connect it to wired network segments. As for Wi-Fi networks, there is the full dual-band 802.11a/g/n complement which makes this computer so adept to any current network. This level of connectivity would please not just those involved with troubleshooting home or business networks but anyone who valuse connectivity to any Internet-bearing computer network without the need to carry accessories with them. As for Bluetooth, the hardware is ready for Bluetooth 4.0 Smart devices – if wireless keyboards and mice exploit this technology, they could run for a long time on a pair of AA batteries.

Sony VAIO Duo 11 slider-convertible tablet -Clothespeg-style Ethernet connector for wired networks

Clothespeg-style Ethernet connector for wired networks

The solid-state hard disk has the appropriate capacity for secondary-computer use and has that instant responsiveness expected for this class of secondary storage. This is complemented with a slot for SD cards or Sony’s MemoryStick cards which comes in to its own when you want to “take the film out” of your digital camera or camcorder to gain access to your images or video.

Battery life

For day-to-day regular use, the Sony VAIO Duo 11 sips power but video streaming does place a demand on the battery. This was observed with half the battery available at the end of a 1-hour TV serial streamed down from SBS On-Demand via a Wi-Fi network.

Like with some of the smaller VAIO laptops, Sony offers an external battery pack as an accessory if you are finding that you want to run this on batteries for a very long time especially with video streaming or previewing.

Other usage notes

Sony VAIO Duo 11 slider-convertible tablet - rear viewThe slider-convertible design that the Sony VAIO Duo 11 has is the feature that impresses most bystanders in a similar manner to a sports car’s pop-up headlights or the way a convertible’s rag-top retracts at the push of a button.

One person who lives with me and uses an HP netbook as a secondary travel computer was impressed by the size of this computer and the way the keyboard comes out for regular typing. A cafe owner in trendy Brunswick Street, Fitzroy was also impressed with the way this computer changes from a tablet to a notebook computer when I was talking with him about it. This is although he sees a lot of people using Apple MacBook computers at his cafe-bar which has a Wi-Fi hotspot.

Limitations and Points Of Improvement

The Sony VAIO Duo 11 could benefit from the use of a thumbstick as the main fine-navigation tool rather than a keyboard-wide touchpad.

As well, a sleeve could be supplied as a standard accessory to protect the screen from scratches as it is taken around in your bag. Windows 8 could also benefit from an option to implement a same text pitch across all resolutions on small screens so as to improve readability in Desktop mode.

The NFC sensor could also be duplicated on the front of the computer or on the keyboard edge as well as on the rear of the computer so you can transfer Web links easily between an Android phone and this device.

Conclusion

I would recommend this computer as a portable secondary computer for those of us who want to create content. Here, it would come in to its own with email, taking notes and similar activities. As well, those of us who like working at the “second-office” cafes, lounges and bars, or do a lot of travel would value this computer and its peers even though we use a larger computer like a desktop or larger laptop as the main computer.

Here, the Sony VAIO Duo 11, Dell XPS 12 or the HP Envy x2 would become more the “open-frame” touch-enabled answer to a MacBook Air 11-inch as far as a small notebook is concerned and is a sign of a very crowded market for this class of computer. They can also become a challenge to the 10″ tablets when it becomes desireable to have the full content-creation functionality without the need to carry extra accessories. I would consider this if you value less fiddling with “swivel-head” mechanisms or detachable keyboards and always want to have a simplified single-piece device that can serves as a tablet or a notebook computer.

Product Review–Brother MFC-J4710DW colour multifunction inkjet printer

Introduction

The Brother MFC-J4710DW colour multifunction printer that I am reviewing is based on a new paper-feed concept where the paper is fed through the machine by the long edge and marked across the long edge when the document is printed, which would be described as being “landscape orientation”. The key advantages of this design yield a relatively compact machine compared to most desktop inkjet printers which are much deeper as well as a quicker turnaround when the document is printed.

I am reviewing the MFC-J4710DW which is the top of the line model in this series and this has two paper trays as well as Wi-Fi networking. Lesser models like the MFC-J4510DW have a single paper tray as well as omitting the single-pass duplex automatic document feeder. The cheapest models like the MFC-J4410DW also have a slower print speed for those who don’t value the quick turnaround.

Brother MFC-J410DW sideways-print multifunction inkjet printer

Print Scan Copy Fax /
E-mail
Paper Trays Connections
Colour Colour Colour Colour 2 x A4 USB 2.0
Piezoelectric Ink-jet 2400dpi Optimised book copy, ID copy, duplex copy Super G3 Multi-purpose tray with A3 capability Ethernet, 802.11g/n Wi-Fi
Auto-duplex Single-pass duplex  ADF T.37 Internet fax, scan to email IPv6

Prices

Printer

Recommended Retail Price: AUD$299

Inks

Standard High-Capacity
Price Pages Price Pages
Black AUD$30 600 AUD$37 1200
Cyan AUD$24 600 AUD$34 1200
Magenta AUD$24 600 AUD$34 1200
Yellow AUD$24 600 AUD$34 1200

 

The printer itself

Brother MFC-J410DW sideways-print multifunction inkjet printer - loaded deck view with lengthways document output

Loaded deck view with lengthways document output

As I mentioned before, the Brother MFC-J4710DW prints along the long edge of the A4 sheet of paper. There are two paper trays so you can use different media types or sizes like A4 and A5 or letterhead and regular paper.

Installation and setup

Brother MFC-J4710DW sideways-print multifunction inkjet printer USB and Ethernet connections

USB and Ethernet connections under scanner bed

Like with the previously reviewed Brother MFC-J6910DW, this printer uses a cavity in the top of the machine under the scanner bed for connecting USB or Ethernet cables. This is different to the common practice of having these connections on the back of the printer and may impede in having them easily accessible if you wish to move the machine between different locations. Of course, the power and telephone connections are kept easily accessible.

For network connectivity, this printer supports Ethernet and 802.11g/n Wi-Fi connectivity. It also is ready for IPv6 networks which are becoming the norm for business networks and will become the norm with the next-generation broadband Internet.

Brother NFC-J4710DW sideways-print multifunction inkjet printer print cartridges

Print cartridges loaded from the front

Like the other inkjet multifunction printers that Brother offers and the newer HP OfficeJet small-business Inkjet printers, this printer has you load the cartridges via the front of the machine. This is a method which I applaud because you don’t have to lift a lid to change the ink cartridges when you run out of ink and this printer doesn’t require much effort to remove or insert the cartridges. It didn’t require much effort to load the cartridges in the printer which would work well with its useability.

Walk-up functions – can be started from printer’s control surface

I have done a few copying jobs with this printer and have found that it could benefit from a few improvements when it comes to locating the document on the glass platen for copying.

Here, you have to have the markings for where you locate the documents for scanning and copying in a contrasting colour so you can find where to position that document.

As well, the automatic document feeder can appear to be confusing for the unitiatied especially when it comes to locating the document. Here, you have to make sure that it is between the light-grey document guides and this issue may also be of concern with printers that use ultra-compact automatic document feeders. As well, the pages that are finished with are appear to be on top of the pages that are yet to be scanned which can be very confusing when you wish to remove pages that are finished with and / or add more pages to the job during a scan or copy of a large document.

It has copying features like optimised book copy, “copy to A3” and ID copy which are features I would start to expect from most copying devices. The optimised book copy feature worked very well when I was doing some copying of recipes from some cookbooks for someone who was cooking these recipes at another kitchen. It was also very accurate when it came to copying the documents.

The Brother MFC-J4710DW supports Super G3 colour faxing over the regular telephone line and has the expected capabilities of a business fax machine. As well, you can download a free add-on from Brother’s Website to enable it to become an endpoint for T.37 “fax-via-email” services. This includes the ability to forward faxes received via email to regular fax machines that don’t support this technology using the phone line.

Brother MFC-J410DW sideways-print multifunction inkjet printer memory card slots and USB port

Memory card slots and USB walk-up-printing / device-charging port

There is of course memory card slots and a USB port to facilitate “walk-up” printing of images and PDF documents from USB thumbdrives or memory cards. This also has the ability to print from PictBridge-capable cameras, but can work as a charging point for your smartphone, tablet or other gadgets even when the printer is in a quiescent standby mode.  These are hidden behind a black drop-down flap on the front of the printer.

Web-based services

Brother supports integration with the popular Web-hosted storage, photo-sharing and social-networking services with this printer. This setup operates in a manner which I like and I was pleased with it after I tested it with my Facebook account to print 2 images from an album of mine.

Here, you don’t have to enter your login parameters in to the device, which avoids using a small touchscreen keyboard for this effort. Instead, you use the Brother Web Connect page to enrol your printer with the cloud storage, social network or other service you have your account with. Once you log in to your service, a user interface will come up to ask you whether to allow this software and service to have access to your resources and those resources you are entitled to have access to. Then, if you give the go-ahead, you are given a temporary registration number which you key in to your printer on its control surface.

Then, at the printer, you select “Web” then select the service you want to use and touch the “Register/Delete” option. This is where you key in this registration number and give the account a known name and have the option to set a PIN to prevent unauthorised access to the account. With the photo-sharing services and the social networks, you have the ability to print out the pictures or download them to removeable media that is plugged in to the printer. As well, you can scan or upload the pictures to the photo sharing service or social network.

If you use Dropbox, Evernote or a similar service, you also have the ability to turn out hard copy of PDF documents and scan hard copy documents to these services as PDF files. Personally, I would like to see the ability to upload PDFs from removeable media that is plugged in to the printer.

It is one of a few method that I would like to see for linking users’ accounts on Web-based services with devices like printers or consumer-electronics devices in order to benefit from these services. Here, it exploits the reduced user interfaces that these devices typically have such as a numeric keypad or a D-pad by avoiding the need to “pick” letters on a virtual keyboard or be nimble with the numeric keypad for text entry when you sign in to Facebook, Picasa or Dropbox from one of these devices.

As for loading images from a Facebook album, it can take a bit of time to show up the pictures from that album but the pictures were gradually loaded one by one. But once you chose the pictures to print, the print duration was very similar to what I would expect for turning out photos.

Working with mobile devices

As for working with a mobile device, the Brother MFC-J4710DW printer worked properly with the iPrint&Scan mobile app on my Android phone. This was more so when it came to turning out photos or PDFs held on that phone.

There is also native support for Apple’s AirPrint technology as well as Google Cloud Print technology which can go a long way with printing from the iOS and Android devices.

Computer functions

Although I use the latest driver software from Brother’s Web site rather than what was on the CD in the box. I had found that the software had loaded very quickly without noticeable issues on my Windows 8 computer.

The ControlCenter 4 desktop-scan software could benefit from a “continuous scan” option available not as a custom setting but as an option immediately selectable from the scanning screen. HP’s desktop scanning software has the option to add pages offered as a default option and you click “Finish” to have the file completed and saved at the end of a scan job. Here, this would come in handy when you manually scan multi-page documents using the scanner platen due to factors like odd paper sizes, bound material or fragile documents; or pass a large multi-sheet document through the automatic document feeder.

The scanning procedure was very quick and accurate and performed properly even when I was scanning some very old fragile documents to PDF files.

As for the print driver, this software didn’t show any unnecessary dialogue boxes or pop-up messages during the printing procedure.

Print quality and reliability observations

Brother MFC-J410DW next to a regular multifunction inkjet printer

This printer takes up less desk space compared to a conventional inkjet multifunction printer

A 30-page printout on one side of the paper had yielded a quick reliable turnout but the colour may not appear to be as accurate as it should be for the printout. The high-speed turnout was brought on by the ability to work along the long edge of the paper.

A test that I do with printers that have auto-duplex facilities is to have the printer print a “download-to-print” door-hanger campaign document master on both sides of the paper using this function. Here, I look for any shift between the front and the back of the document so as to determine whether the duplexer mechanism is causing any unwanted shifting between the front and back of the document which may concern those of us who are using this function as part of creating odd-shaped desktop publishing projects like bookmarks, luggage tags or door hangers. I had noticed a very slight shift between the back of the document is slightly forward on the long edge compared to the front when I completed this test on this Brother printer.

Landscape document output on the Brother printer compared to the portrait document output on an orthodox  multifunction printer

Landscape document output on the Brother printer compared to the portrait document output on an orthodox multifunction printer

The Brother MFC-J4710DW also had passed the reliable printing test where I had it print a 90-page PDF using auto-duplex. This was important because a lot of people may think that the “long-edge” printing may be too “cutting-edge” to be considered reliable in a first-generation implementation of this technology. It has successfully completed the test without causing any worries.

When I printed out the test photos on the glossy paper, I noticed a strong yellow overtone on the pictures which was noticeable on the white parts of the image. As well, the flesh tones tended to become a bit more red. There also wasn’t much of the sharpness and definition in the images. I had done this test using the “best” settings for the printer driver rather than the normal settings and it may be a driver-specific issue. When it came to turning out images from the Internet using the printer’s control panel, there wasn’t much of that yellow overtone.

I had to use the manual bypass slot at the back of the printer to load the glossy paper sheets and this required me to load each sheet one at a time. Here, I was able to see the “long-edge” printing feature in action when it came to handling the pictures.

The big question that is likely to be asked about the Brother MFC-J4710DW and its peers is whether the “sideways print” / “long-edge print” / landscape print technology is too “cutting-edge” for reliable operation? Personoally, I had found this to be reliable for a first-generation implementation of this setup.

Limitations and Points Of Improvement

The Brother MFC-J4710DW could benefit from a few extra features and these may be issued with subsequent-generations of this print setup.

One feature that would come a long way would be to allow more than one sheet of paper to be in the manual feed slot for situations where you may be printing many multi-page documents on A3 or special media.

It could also benefit from a document rest that automatically extends and retracts in a similar way to what happens with the HP Envy printers. This can keep the printer having that compact shape that it is known for/

The on-device software could benefit from a few useability improvements. For example, the Web Connect functionality could allow for searching or sorting “other users” on a social network when you are hunting down pictures to print from a “friend’s” album.

The other issue that is of concern not just with this machine but with all of the network-enabled multi-function printers that have fax ability is to support Internet-based time synchronisation. Here, you could just then determine what time zone you are in and the printer sets its clock for you automatically like what happens with most desktop and mobile computer operating systems. Similarly, a lot of these printers could benefit from increased memory or flash memory in order to allow for efficient copy, fax and “walk-up” printing functionality as well as being able to maintain its own network print queue.

Conclusion and Placement Notes

Brother MFC-J4710DW sideways-print multifunction inkjet printerI would recommend that the Brother MFC-J4710DW or its peers be considered as an option when you are considering a general-purpose desktop multifunction printer for the small business, professional’s office or a home office. This is especially where space is at a premium or a large desktop multifunction printer doesn’t look the part in your office space’s aesthetics.

The cheaper models may work well if you are on a budget and don’t place value on printing speed or simply have a high-end laser printer serving your high-speed printing needs.

Serious challenges to Apple from the Windows and Android front

Article

Sony Vaio Pro 13 Ultrabook v Apple MacBook Air For Photographers

My Comments

Previously, Apple had a stronghold on computing for the creative industries with most of their Macintosh computers. This was even since the Macintosh platform was launched where these computers with their graphical-user-interface being run alongside a laser printer brought in the concept of desktop publishing.

Similarly, they had a few years cornering the mobile computing platform with their iPhone and iPad devices. It also included capturing the premium “stylish computing” market with their MacBook Air and, in some cases, the MacBook Pro laptops.

Now a few computing devices and platforms are challenging Apple in a lot of these fronts. Over the last year, Samsung, HTC and Sony have fielded some very impressive highly-capable smartphones that have put the iPhone on notice like the Samsung Galaxy S3 and S4. These phones also show an impressive “cool” style about them as well as the phones being able to take as good an image as an Apple iPhone.

As for mobile tablets, the 7” coat-pocket tablets like the Google Nexus 7 have created a distinct market niche which Apple couldn’t successfully fill with the right device. Similar, Sony had tendered the XPeria Z which has come close to competing with the iPad as far as 10” tablets are concerned.

HP Envy 15-3000 Series laptop

HP Envy 15-3000 Series Beats Edition multimedia laptop

Over the last few years, there have been a number of laptops and notebooks that have answered the MacBook Pro and MacBook Air in many ways. For example, the HP Envy 15-3000 which I previously reviewed provided a construction look and feel that is very close to the MacBook Pro series of laptops. Lately, Sony fielded the VAIO Pro 13 which is a Windows 8 Ultrabook that has been described in a review by “The Age” as having a photo-grade display and is capable of answering a similar-size MacBook Air as a portable workflow computer for a professional photographer. Here, this one implemented a highly-controllable Full HD display which was able to yield the proper colour temperature for photography.

Toshiba Satellite P870 desktop-replacement laptop Harman-Kardon speakers

Harman-Kardon speakers to give this laptop full sound

As well, companies who have a strong presence in the recording and reproduction of music are becoming involved in the quest for improved sound quality in Windows-based laptops. Examples of these include Beats by Dr Dre working with HP to provide improved sound for HP Envy laptops; premium Toshiba laptops being equipped with Harman-Kardon speakers and ASUS laptops having Bang & Olufsen sound tuning. Who knows what would be happening soon with even the conversion of audio signals between the digital and analogue domains being worked on so as to provide a line-level sound quality equal to or better than the Apple MacBook Pro.

Of course, the Windows and Android equipment have supported an “open-frame” operating environment for both the hardware and software where common standards set by industry groups have been respected. For example, the Android smartphones use MicroUSB as a power / data connection, it is easier for users to gain access to the files held on their Windows or Android devices, and users can integrate an Android or Windows device to a Wi-Fi wireless network at the touch of a button using WPS setup.

What I do see is that regular and mobile computing is swinging from Apple being considered the “cool kid” for both these applications to a situation where they are considered a has-been.

The software on those customer-facing iPads–your mobile device can run it

Article

5 Things To Know About That In-Room Hotel iPad || HotelChatter

From the horse’s mouth

Intelity (software developer of these apps)

Company Web page

My Comments

An increasing number of hotels are providing guests with an iPad or similar “mobile-platform” tablet in your room for you to use. These typically are running a custom-designed app that works as an information source for the guest and, in some cases, provides self-service access to a wide range of services like in-room dining, housekeeping requests and check-out.

These devices are the same hardware as the iPad that you have, and this customer-service software is most likely to be available at the iTunes App Store for your iOS device or Google Play for your Android device. In some cases, the software may also be finished as an HTML5 Web app for use on laptops running the latest Web browser or on mobile devices that don’t have a native version written for them.

By you running this kind of customer-facing software on your device, you have access to the same benefits as you would have on the device that is located at the property. This can benefit you if you end up being enamoured by the hotel you are staying at and can allow you to take it further. For example, you could use the “local knowledge” functionality when you are out and about or even to plan your visit to the same town again; or refer to “in-room dining” menus for suggesting menu options that you have liked.

These kind of customer-facing apps can benefit customers who want to take the experience with your product or service further. This is in a similar way to the concept of the “app-cessory” where there are mobile-platform apps that enhance the functionality of a device or provide an improved user interface for the device or the apps that extend sports events or TV shows by adding value to them.

What I would like to see of these apps is that developers write native apps for the common mobile platforms while writing Web apps for use with unsupported platforms.

Short-range DSL now moves to Gigabit speeds

Article

thinkbroadband :: Say hello to new 1Gbps ITU G.9700 standard

My Comments

Just lately, the phone-line-based DSL standard has been extended to the Gigabit class courtesy of the new ITU G.9700 standard. It will take a significant amount of time before the necessary hardware is released in to the market, whether as professional-install hardware or self-install hardware.

It is primarily a way to keep the phone-line-based DSL technology alive and relevant even though the fibre-to-the-premises deployments like what is being pushed in France, Australia under a Labour government or some US cities by Google is being considered the status quo.

On the other hand, it is being pitched as a faster alternative to the short-range VDSL2 deployments that are being used in “fibre-to-the-building” or some “fibre-to-the-cabinet” setups. In the UK, they see a situation where the fibre-copper transfer point could be serving a small group of premises whether it be a street or a block of flats. On the other hand, they also suggested the technology for older buildings where it could be harder and prohibitively expensive to run optical fibre in these buildings for a fibre-to-the-premises setup.

At the moment, like with other DSL technologies, this will initially require different splitters which could make a requirement for professional “truck-roll-based” installation for these setups rather than the cheaper “self-install” kits commonly used with ADSL setups.

It will be interesting to see how this will affect the concept of deploying next-generation broadband in different areas, whether they are the target of a fibre-copper or full-fibre setup.