Tag: UPnP

Introduction

Previously, I had covered the concept of the Wi-Fi-based wireless speakers on this Website including writing an article about how to get the most out of these and the Bluetooth variants. Now I have the chance to review two Wi-FI-enabled speaker sets from Sony – one being the midrange SA-NS410 and the other being the more-expensive SA-NS510 which will come up in a separate review.

Price

The unit itself:

RRP including tax: AUD$299

Functions

Connections

Speakers

The unit itself

Speaker controls – volume, input select, Party Streaming, firmware update

The Sony SA-NS410 wireless speaker is a deep speaker with a leaf-shape profile. You see a blue status halo appears from the bottom of the speaker if in standby but this halo glows white when the speaker is in full action playing music. There are local controls on the bottom edge of the speaker to turn it on and off, invoke WPS network enrolment, adjust the volume and select whatever is connected to the 3.5mm input jack on the back of the unit.

Other controls – the power switch and the Party Streaming button.

There is also another button to invoke the “Party Streaming” function which is an audio-broadcast function that is part of recent network-capable Sony home AV equipment. Here, you can have audio content playing on one of these devices such as the Sony CMT-MX750Ni music system configured as a “Party Streaming Host” and press this button to “pick up” the content through this speaker. Similarly, you could have content served to this speaker via a DLNA Media Server and “pick it up” from another of these speakers using the “Party Streaming” button.

The remote control that comes with these speakers

Of course, this speaker can also be controlled by a card-sized infra-red remote control as well as your computer or mobile device running the Network Audio Remote app.

For setup, I was able to integrate the Sony SA-NS410 wireless speaker with the home network using the “Network Setup” App on my Android phone. This required me to transcribe the SSID and security passphrase in to the phone. The app could support the ability to transfer the parameters of the network you were connected to or another network from the phone to the speaker. The speaker works as its own access point during the setup phase but I would like to have it able to work as a WiFi Direct master device or own access point so it can work as a standalone setup when you don’t have a proper small network to use it with when you want to play music from your phone. Of course, you can use these speakers with an Ethernet or HomePlug wired network segment thanks to an Ethernet jack being provided on the back of this speaker.

It is also worth noticing that these speakers have a “Network Standby” switch so you not have them come alive from DLNA control-point apps on the home network including the Audio Remote app. This can be useful if you have network problems or don’t necessarily want people to play a practical joke on you if you have the speakers in the bedroom.

Connections on the back of the speaker – WPS setup button, power connection, 3.5mm audio line-input jack, Ethernet jack, Standby – Network Standby switch

The Network Audio Remote app worked properly managing the volume and pushing music from other media servers. It could find Internet radio stations and programs but this function does leave a lot to be desired with filling out the list of stations or areas. This is where it stalls when downloading these lists and then reloads the last few stations and can be a pain with US and European localities with many stations. This was “fixed up” through a firmware update that Sony “pushed” out to this speaker and the SA-NS510 speaker.

Personally, I would recommend that Sony offers a DLNA media server with the Android “Network Audio Remote” application so you don’t have to find one of these apps to “push out” music held on your Android device. But I used the Twonky Mobile DLNA server to share out the music on my Android phone and had it controlled via the Network Audio Remote and this may be an ideal path if you have DLNA software on your Android phone that serves well but is balky as a control point.

For the computer, I was able to use the “Play To” function in Windows 8 to push music to the Sony SA-NS410 speaker from the PC and the NAS and this worked properly. If you still run a Windows XP box and use it as a DLNA server, you may have to use other DLNA control point software on that computer or use Network Audio Remote on your smartphone or tablet to manage your music.

The Sony SA-NS410 speaker was still sensitive with the Wi-Fi network although it took a few attempts to register to the router. The music played very smoothly from the DLNA server on the network-attached storage and from a French Internet-radio station. As for this Internet radio station, this was noticed during the day and with good bandwidth.

I have run the Sony SA-NS410 at the maximum level possible with Network Audio Remote and played  some Italian folk songs recorded in the 1970s and a recently-issued dance track. Here, I was doing this to identify any points where the speaker can “stress out” and make the music sound awful. At that level, I noticed very minimal amounts of clipping with the dance track and the bass accompaniment was there and came through very tight. The folk music tracks sounded clear with the guitar accompaniment and even when there was full accompaniment going on, it didn’t sound muddled.

This speaker performed well as a Party Streaming guest device but can sound glitchy due to the network not supporting proper multicast behaviour over the Wi-FI segment.

Limitations and Points Of Improvement

I would like to improve the way that the Sony SA-NS410 wireless speaker and its peers are set up so as to allow for transportability. Here, it could have an easy-to-invoke “new-network-setup” mode like holding down the Standby button to have it act as if it is to be set up with a new network.

Similarly, it could benefit from the ability to remember the parameters for up to five wireless networks. This could have it work with range extenders or “Mi-Fi” routers as well as being able to be taken between two different home networks for party applications. As well, the speaker could work fully as an 802.11n single-stream wireless client device rather than using 802.11g as the preferred wireless network setup. This is a problem that will beset a lot of small comsumer-electronics devices like these speakers until a wide number of manufacturers make the single-stream 802.11n WiFi chipsets for these devices at cost-effective prices.

The “Network Audio Remote” Android software could be improved so it responds to changes that affect the device as soon as they occur with minimal time lag. It could also benefit from an associated DLNA server for Android phones so you don’t have to “hunt for” separate DLNA server apps from the Google Play store.

Conclusion

I would recommend the Sony SA-NS410 wireless network speaker as being suitable for most network-speaker applications where you want the speaker to yield room-filling sound that has tight bass and good response across the frequencies. It would work with DLNA or AirPlay setups as well as being a line-level amplified speaker that doesn’t sound wimpy.

The Sony Party-Streaming feature can also go a long way if you have recent Sony network-capable music or home-theatre systems in use on your home network and it could add a fair bit of extra value to these systems.

Introduction

I haven’t reviewed any of the Internet table radios for over a year because of a desire to review the “big sets” such as the hi-fi equipment and systems; as well as encompassing other computer equipment.

But now I have the chance to review the Pure Sensia 200D Connect Internet table radio which is the successor to the original Pure Sensia, the first Internet table radio that is controlled in the same manner to the smartphone or tablet. This set has been optimised for Pure Connect which is the rebranded version of the original “Lounge” online content service offered by Pure, with this service also become a music-content streaming service as well as an Internet-radio directory.

Price

The unit itself

Recommended Retail Price: AUD$599

Accessories and options

Optional ChargePAK F1 battery: AUD$79

Functions

Connections

Speakers

The Internet radio iteslf

Oval-shape remote control

The Pure Sensia 200D Connect, which is available in white or black, is an egg-shaped radio which can sit directly on the bench with its touchscreen display angled upwards. As well it can be perched on its supplied base so the display can face straight forwards. It also comes with an oval-shaped infra-red remote control that can be used to operate the basic functions.

As for power. the radio can work on AC with the supplied AC adaptor or can work on the optional ChargePAK F1 rechargeable battery which allows it to be a portable radio.

The connections available on the radio – AUX IN, Headphones, USB

One feature I am pleased about is that this radio has a headphone jack so you can use it with headphones or connect it to external powered speakers like computer speakers for a better sound.

The sound from the internal speakers has some good bass response which works well for voice and music, something that would be expected from a good table radio. Even when I tried it with the New Year’s Eve broadcast form Heart London, the sound from Big Ben’s chimes that rang in the year at midnight GMT (UTC) had that same weighty sound. As for tone control, you only have the bass & treble settings, without any loudness compensation or other tone preset.

For FM radio, the Pure Sensia 200D Connect is not all that consistent in “nailing” a clean stereo signal for all Melbourne stations when it was used downstairs of our split-level house. On the other hand, the set was able to catch all DAB+ multiplexes in Melbourne and play the expected clean sound from the services that are on the multiplexes. Of course the radio supports full information display for RDS-capable FM stations and DAB+ stations.

This set is operated primarily via this touch screen

The Internet radio functionality that the Pure Sensia 200D Connect has work well even though it was dealing with over-subscribed Internet broadcast streams. Like other Pure radios, the Sensia uses a form-based selection arrangement for “drilling down” Internet stations that you are after. This is different to the “tree-based” arrangement that most Internet radios use.

As well, you sign up with the free Pure Connect to store your favourite stations, which can also work as a listening point for Internet radio on your computer. There is also the ability to record from DAB+ or Internet broadcasts to a USB memory stick in the same way that you used to in the 80s with the classic boomboxes. But this function doesn’t extend to FM broadcasts.

Controls for power and volume on top of the radio

The Pure Sensia 200D Connect does work as part of the DLNA Home Media Network, more so when you select the content from its display rather than “push” the content from another DLNA Control Point device. You also have the ability to have this device show images on its display thus working as an electronic picture frame.

It can also work as a clock radio that responds to two alarm events and a kitchen (count-down) timer. The alarm events can be set to a particular weekday, Monday-Friday or the weekend as well as the ability to sound every day. There is even the ability to set the alarm to sound once which can be useful for specific events or if you have the Sensia 200D Connect in a guest bedroom.

When you turn the Pure Sensia off, the screen shows the current time, but goes blank until you touch it. You can override this so that the radio can work as a clock, showing the current time all the time when it is off.

Limitations and Points of Improvement

One point of improvement that Pure could implement is to be able to use a USB-connected optical drive as a CD player when you just want to play CDs. Similarly, the support for Bluetooth, DLNA MediaRenderer or Apple Airplay functionality could allow for wireless playback of music from smartphones or tablets.

This radio has the potential to be the basis for a platform-driven table radio product with such things as an app store or a software package that provide enhanced functionality. For example, it could benefit from a “hotel package” which provides an easy-to-set alarm clock that is reset when a guest checks out, volume limiting, tourist-information display and the like to benefit the hotel industry. Similarly, there could be apps that show the news, weather or RSS newsfeeds.

Conclusion

I would recommend the Pure Sensia 200D Connect radio be useful for a network-enabled radio that can be used in the kitchen, office or shop; or as a clock radio for the bedroom. This is more so if you value the large touchscreen or the online integrated functionality that this radio offers.

Articles

HDHomeRun Prime is the first CableCARD tuner to deliver live TV to DLNA Devices

From the horse’s mouth

Silicon Dust

Press Release

Product Page

My Comments

Most of the “broadcast-LAN” server devices which stream broadcast content, whether from a regular antenna (aerial), cable TV or a satellite dish, to a computer network typically require the use of manufacturer-supplied software or drivers on regular computers or mobile devices on that network to gain access to the broadcast content on those devices.

But Silicon Dust, makers of the HDHomeRun “broadcast-LAN” devices have updated their HDHomeRun Prime CableCard-capable cable-TV device to work as a DLNA-compliant device. This means that if you use a DLNA-compliant media client device or run DLNA-compliant media-client software on your computer or smartphone, you can have access to the TV channels through this device.

This function is provided through a software upgrade to the HDHomeRun Prime broadcast-LAN devices, both the new units that are being sold as well as the existing models that are in service. The device will present itself to the DLNA Home Media Network as a Media Server with Premium Video support courtesy of DTCP-IP content security.

I see this more as a valid example of using DLNA as part of a “broadcast-LAN” solution thus providing for software-independent setups for these applications. This would also further the FCC’s desire for customer-friendly cable TV which is independent of particular cable-company-controlled hardware.

What could be seen of this kind of setup being available for the home network? One application may be the use of DLNA-compliant media client software in regular and mobile computing devices to turn these devices in to secondary TVs. This could extend to devices like smart TVs and video peripherals using their network connection effectively as an aerial connection.

As well, home and business users could benefit from being able to push live broadcast content to DLNA-enabled displays using the control point software. Example applications could range from using a tablet or smartphone to push TV programs to a smart TV in the home to bars and cafes pushing out sportscasts or key news broadcasts to the big screens using a POS computer.

One point of evolution I would like to see for these devices is DLNA-driven PVR applications for recording the broadcasts. This may be facilitated with the recording functionality and the broadcast tuner in the same box such as a “TV content server” application. On the other hand, a computer, network-attached storage or similar device picking up content from a device like this HDHomeRun and recording it to its own storage. Then this same device could serve out the content that it records to the DLNA Home Media Network.

It also encompasses the concept of applying “trick-play” to live broadcasts, including the ability to start watching from the beginning of a show even as the show is being recording, like one can do with most PVR setups. As well, there would be the ability for multi-room features like “start on one TV, continue on the other” that can be part of the expected feature set.

At least this device with the new firmware has shown itself as an example of implementing DLNA to a broadcast-network (broadcast-LAN) application.

You may have your music held on a smartphone or tablet but you want it coming through better and louder speakers. Similarly, you have packed out your laptop computer or an external hard disk which you connect to your laptop with music. But you still want the flexibility of moving around your space with your phone or positioning your laptop wherever you want it.

Devices you can use

Primarily you could use a wireless media adaptor that is connected to existing audio equipment or speakers. This function may be integrated in some audio devices like Internet radios or music systems. On the other hand, you could purchase a wireless-enabled speaker system such as a speaker dock which integrates the wireless media adaptor with the speakers.

Methods

Bluetooth

Creative Labs Sound BlasterAxx PS-SBX20 Bluetooth wireless speaker system for the smartphone, tablet or laptop

A common method would be to use a Bluetooth link. This is supported by every smartphone and tablet but would only work with a Bluetooth audio adaptor or Bluetooth speaker system.

Here, the Bluetooth audio device must work to the Bluetooth A2DP audio profile for music playback and AVRCP audio control profile if you want to control the phone from the device’s controls.

To set up your wireless link, you would have to “pair” you mobile device with the Bluetooth audio device. Here, you place the device in “discoverable” mode and then use the mobile device’s “add Bluetooth device” function to discover the audio device. Most recent devices go in to “discoverable” mode when they are first plugged in but with a device that is already connected to power, you may have to hold down a “setup” or “Bluetooth” button. Here, an indicator light may flash in a certain manner to show that the device is in “pairing” or “discoverable” mode.

Bluetooth audio setup with a laptop and a Bluetooth audio adaptor

When you go to your mobile device and use the “add Bluetooth device” function, there will be a list of devices you had already “paired” with your phone as well as a new device name, typically representing the audio device’s brand or model name. Select this device and the pairing process will take place. If your mobile device shows a “password” or “PIN” request as part of this setup, enter 0000 in response to this request.

In this situation, you will likely have your mobile device connecting to your Bluetooth speakers or adaptor. On the other hand, if you already paired your phone or tablet to the Bluetooth audio device and your device and mobile device are on, you would have to go to the Bluetooth menu to select the “Connect” option to establish the connection.

If you subsequently use the same Bluetooth audio device, you may have to “connect” to that device to have it play its music through the audio device. This may require you to enable Bluetooth and, in some cases, select the device’s name to connect it.

Laptop users would then find that the Bluetooth A2DP and Hands Free Profile will present themselves as “sound devices” through the use of class drivers implemented by Windows 7 and MacOS X. You may have to set the Bluetooth virtual sound cards as default sound devices if you are using applications that don’t allow you to determine the sound device for that application. I have covered this issue in further detail in an article about using laptops with Bluetooth devices.

Wi-Fi wireless

Another wireless connection method is to use a Wi-Fi wireless network. This uses a choice of two protocols: Apple Airplay and the open-standard DLNA protocol.

Network setup

These setups require that the mobile device and the wireless network media player are linked through a network that has a Wi-Fi segment and are seen as the same logical network.

In some cases, the network media player can be connected to an Ethernet or HomePlug segment as long as that segment is accessible to the Wi-Fi wireless segment.

Denon Cocoon 500 Wi-Fi wireless speaker that works with DLNA or AirPlay setups

These setups can work with network media players and wireless speakers that implement Wi-Fi Direct thus avoiding the need to use a wireless router like a MiFi to create a wireless-network segment. Similarly, some Wi-Fi Direct “master-device” implementations like the Intel implementation used in Windows laptops can allow the device to be a host for a Wi-Fi Direct segment and a client to an existing Wi-Fi network, thus bridging the connections. This can come in handy with public wireless hotspots due to client isolation and, in most cases, Web-based login being established on them; features which could impede the establishment of a Wi-Fi wireless music network.

But you can gain better results with a dedicated WiFi router or access point like one of the portable “MiFi” routers.

Infact most of these setups implement WPS one-push setup for Android mobile devices, Windows 7 computers and most current-issue Internet audio equipment. On the other hand, they will have a pre-determined device-unique WPA-PSK device passphrase for use with Apple devices.

Sony SA-NS410 Wireless Network Speaker

It is also worth knowing that some speakers like the Sony SA-NS310, SA-NS410 and SA-NS510 also have access to advanced functions through the use of a dedicated smartphone app. In the case of these speakers, they have direct access to online music services or Internet radio with this software but you may find that they would work better with a regular small-network setup with a router serving a dedicated Internet connection. Again a “MiFi” may come in handy here when you use them at a hotel or serviced apartment with the existing public-acces Wi-Fi network.

Apple AirPlay

This method works best with iOS devices like the iPhone or with computers that are running iTunes. Here, you have to use the AirPlay functionality within iTunes or the music player in your iOS device to “push” your music to your AirPlay-capable device.

Rogue Amoeba have provided the AirFoil program for MacOS X and Windows platforms which turn your AirPlay-capable devices in to a virtual soundcard for your computer. I have helped a friend with purchasing and installing this program on their Windows 7 computer so they can pipe Spotify through an Apple AirPort Express device connected to their home stereo. This program sells for US$29 per computer.

DLNA

The UPnP AV / DLNA-based media setup is a highly-flexible network media playback setup which is more open-frame in nature. I have covered this setup previously due to this ability and the ability for many hardware manufacturers and software developers to support it.

If the idea is to have your music device such as your laptop or smartphone control the music, you will need to make sure that the device can work as a “MediaRenderer”. Devices like the Sony CMT-MX750Ni music system, the WD TV Live network media adaptors or the Pioneer XW-SMA3 wireless speakers will work with this function out of the box but some devices that support this function may require you to visit their setup menu to enable “DLNA Remote Control” or similar functions.

A DLNA-based setup requires a media server to be installed on your computer or mobile device. Windows-based computers will perform this function using Windows Media Player but you can use other third-party players like TwonkyMedia. Here you would have to point these programs to your music library.

Android phones and tablets can work from one of many different DLNA media server-controller apps like TwonkyMedia or AllShare, which is set up to share the content on your device or the SD card.

Depending on the media-client device, a DLNA setup can be managed from the media client device’s control surface or from your computer or mobile device. For example, Windows Media Player that comes with Windows 7 or 8 offers a “Play To” function which allows you to have your content “pushed to” devices that support this kind of control.

DLNA can work as a virtual sound card for Windows computers if you use the Jamcast virtual-sound-card software on your computer, which costs US$29.99. This can be useful for setups like the streaming music services like MOG, Pandora or Spotify which rely on a Web page or client program for them to work.

On the other hand, you could use the DLNA setup to have a laptop play music from your smartphone or tablet. This can be achieved with TwonkyMedia Manager for all platforms or with Windows Media Player 12 (Windows 7 and 8). In the case of Windows Media Player 12, you would select “Stream” – “Allow remote control of my player” to have this option work.

Worth knowing

Sometimes if one of the wireless speakers doesn’t work properly such as failing to reinstate with the device or network or a Wi-Fi speaker failing to connect to another wireless network segment, you may have to reset the speaker. This is a procedure that is dependent on the speaker but may involve you pressing a “RESET” button in a certain way  Then you may have to pair your audio device to the speaker again or configure it to the network you want it to join.

If the idea is to operate that Bluetooth or Wi-Fi speaker at a pool party, avoid the temptation to think that you can operate the iPhone that’s containing the music from the pool or spa. This is where a lot of portable devices become damaged due to the water. Here, it would be better to have the device containing the music, as well as the speaker located as far back from the water as you can, such as near a wall or safety fence.

Conclusion

Once you have your smartphone, tablet or laptop working with a wireless-audio link such as a Bluetooth link, you can be able to have a chance to hear better sound out of these devices while allowing yourself to move the smartphone or similar device around freely.

Update Note

This article, originally published on October 2012, has been updated to make reference to Rogue Amoeba’s AirFoil virtual-sound-card software for Apple AirPlay and to update new pricing details for Jamcast. As well, I have provided direct links to the software developers’ Web pages. I have also created links to the product reviews for the Sony SA-NS410 and SA-NS510 speakers which I had reviewed since the article was first published.

Articles

Sony unveils super slim PlayStation 3 | Crave – CNET

Sony PlayStation 3 2012 up close and personal eyes on | Engadget

From the horse’s mouth

US Press Release

European Press Release

My Comments

The press have been afield with the news about Sony’s latest PlayStation 3 games console. But this one is a major redesign to cope with the smaller space that newer consolidated electronics can occupy. This has yielded a smaller console that is significantly lighter and doesn’t use as much power as the existing units.

One main difference is that it has a top-loading Blu-Ray drive for your games and movies. This uses a sliding lid in a similar vein to some CD players like the B&O Beocenter 9000 series music systems rather than the hinged lid that, in my opinion, is asking for problems. 

There are two main design variants – one with a 500Gb hard disk and a cheaper variant with 12Gb flash memory with the ability to add in an optional 250Gb hard disk. The American market would have the console come with the 250Gb hard disk in the box. The cheaper version may work with occasional gamers and those of us who use the PS3 more as a network media client rather than as the full-on games console.

Of course there will be access to the PlayStation Network and the local video-on-demand services that has allowed the PS3 to earn its keep as a network multimedia terminal rather than just a games console for teenagers and young men. It will also have the same performance expectations as the current-generation PS3.

But could these variants be a way to bring the PlayStation Experience to more households or allow one to increase the feasibility for more of the multi-player multi-machine gaming from this console?

Where to go to enable DLNA in Windows Media Player 12

Just lately, the couple whom I am living with bit the bullet to buy a flatscreen TV. They wanted something that was to be good-quality and would be known to last a long time. They asked me for some assistance on this matter and I recommended any of the newer Panasonic, Sony, Samsung or LG sets and not to worry about getting 3D for exanple. So the husband went out and chose a 40” variant of the new Samsung Smart TVs.

I had got this new set going in our home and attached it to our home network using Wi-Fi with the supplied Wi-Fi network adaptor dongle as well as connecting it to the aerial (antenna), the Samsung Blu-Ray player they purchased as well as an existing PVR. This opened up a variety of opportunities like access to ABC iView and SBS On-Demand which represented the on-demand front-ends for their favourite TV channels.

DLNA content collections listed as sources on the TV

But the lady of the house wanted also to show their newly-taken pictures, including some from a recent holiday of theirs, to her mother-in-law who was arriving the next day. So I set up the husband’s desktop PC which had the images on it to enable Windows Media Streaming in Windows Media Player. This allowed the computer, which was on the home network to share all the pictures in the Pictures library on to the home network using DLNA which this TV supported. There was also a network-attached-storage which they bought which I had set up as a backup / offload device for photos and I had also set this up for DLNA media-server functionality.

DLNA media directory shown on TV screen as provided by PC

The whole setup worked properly using DLNA. I had subsequently demonstrated to the husband how to bring up the latest images from the computer using the TV’s AllShare interface. This is where the TV listed each DLNA media collection as a source alongside the TV tuner and all sources connected to it, thus simplifying the operation experience for them. They were able to select the PC by its name, then select Pictures and choose how they wanted to view them, an activity which for someone with limited computer skills was able to get the hang of easily.

But I infact exposed this couple to the DLNA concept and why I stood for it earlier on when I was involved in choosing another network-attached storage device. Here, I looked over the box and was looking for “UPnP” and “DLNA” logos on the box to be sure that the NAS complied with these standards. Subsequently I mentioned that I was looking for network equipment that stood for these standards due to ease of access to stored media on the device from compliant equipment.

What this has been about is demonstrating the use of a network-capable TV set being able to “draw down” pictures from a computer using commonly-available standards. Then being able to locate and view these pictures in a manner that is very intuitive even for people who don’t have much in the way of computer skills.

Revo Domino – an example of an Internet radio with DLNA Media Playback

Regular readers of this site would have noticed the Internet radios that I have reviewed earlier on. These were typically tabletop radios that had a broadcast tuner capable of receiving at least FM and / or DAB digital broadcast radio. But they had Wi-Fi and, in some cases, Ethernet network connectivity which allowed them access to, most commonly, the vTuner Internet-radio directory and the ability to play through audio content from any broadcaster that listed its stream in this directory. They also had the ability to play audio content held on a DLNA media server after it was selected on the set’s control surface.

Of course, all of these sets had a line input so they can amplify other audio equipment like portable CD players but most of them had a dock for one of Apple’s iPod or iPhone mobile devices. A few of the sets even had a USB connection so you can play music held on a USB memory key.

Now the network-audio direction is coming in the form of network-capable speaker units that have Apple Airplay and, increasingly, DLNA Media-Renderer operating mode. This meant that you could use software running to these protocols to play music held on a computer, smartphone or tablet through these systems as explained in this feature article. The network connectivity for all of them is Wi-Fi to 802.11g/n standards with WPS “push-push” setup but some of these units would have an Ethernet socket for connection to an Ethernet or HomePlug network segment and / or Wi-Fi Direct so they can become their own access point for smartphones and tablets.

The manufacturers are running a range of two or three units with similar functionality but having differing speaker configurations and / or power outputs with some having the capability to offer a “punchy” sound where that tight bass does exist. As well, one or two of the models in these ranges is equipped with a rechargeable battery pack and designed for portability so they can be used on the beach or on the streets in a similar manner to those classic “ghetto-blasters” of the 1980s.

Pioneer NAC-3 Internet radio and iPod dock – capable of being controlled by a DLNA control point program

The device that predicted this level of functionality in a network speaker system was, in my opinion, the Pioneer XW-NAC3 speaker dock / Internet radio that I reviewed on this site. Here, it had Wi-Fi and Ethernet connectivity as well as support for Bluetooth A2DP audio streaming. But it used the network connectivity to play broadcast content from Internet-radio stations on the vTuner directory as well as being able to be controlled by a DLNA Media Control Point alongside the basic DLNA MediaPlayer “play-from-own-control-surface” functionality.

Usage Issues

A problem I have discovered with some DLNA server / control point software running on Android devices is that they won’t work properly if you run the device as its own access point. This would be something that you may do if you enable “Wi-Fi tethering” on your phone to share your phone’s Internet access and data allowance with other devices.

Here, you may have to work around this by using another access point to create the temporary Wi-Fi segment. This could be done using an ordinary Wi-Fi router, even one of those “Mi-Fi” devices that work as a router for a wireless-broadband service. This solution may come in to its own with the battery-driven units that don’t have Wi-Fi Direct and you want to play content from your mobile device or laptop.

Another situation that may plague anyone who sets these units up in premises with a public Wi-Fi hotspot is that they may not work properly with these hotspots. Here, most of these public-access networks would be set up for client isolation so that no other client devices can discover each other. As well, most such networks typically use a Web interface for provisioning the Internet service. This will typically make the network unusable for point-to-point use like media playback.

Instead, if you are using that network speaker system in that hotel room or serviced apartment which has a public-access or guest-access wireless hotspot, use a “MiFi” or a similar device to create a Wi-Fi network if the computer, smartphone or speaker system doesn’t support Wi-Fi Direct. Some Wi-Fi Direct setups like the Intel implementations used for laptop computers may allow you to work the temporary network in conjunction with the public-access network and bridge Internet data to this temporary network. This would come in handy with units that offer Internet-radio functionality like the Pioneer NAC-3 or the Denon Cocoon series.

What to look for with these speaker systems

I would make sure that if you are intending to use these network speaker system with a smartphone, tablet or PC, make sure that the unit works with DLNA and Apple AirPlay.

If the speaker unit that you are after doesn’t have Wi-Fi Direct, you may have to make sure you have it working with a wireless access point like your home network’s WiFi router or a “MiFi” when you are using it on a wireless network.

Also pay attention to the sound quality and the functionality of these speakers, especially if you buy units that you intend to use “at home”. As for portable units, look for anything that also works for durability especially if they are intended to be used on the beach or by the pool.

Once you choose the right network-capable speaker system for yourself or to give as a gift, you could then end up enjoying listening to them for a long time.