Category: Mobile Computing

The three-platform tablet race is now on

Toshiba AT300 10" Android tablet computer

Toshiba AT300 10″ Android tablet computer

Previously, if anyone though of a mobile-platform tablet device, they thought of an Apple iPad which was a 10” tablet that had its success driven by a large quantity of apps along with ease of use that made it appeal to those of us who didn’t have much for computer skills.

Very shortly after, the Android platform, driven by the 3.0 “Honeycomb” version of this operating system, came to the fore as far as mobile-platform tablets were concerned. Some of the manufacturers offered the tablets in two different screen sizes – a 7” size that can be kept in a coat pocket or handbag or a 10” that can be rested on the lap like the iPad.

This has continued on with Blackberry having a “bite at the cherry” with their Playbook “business-pitched” tablet to go with their business smartphones. But Microsoft stepped forward with Windows 8 and its Modern UI (née Metro UI) and this saw the arrival of the Surface tablet under their banner along with other PC vendors offering 11” tablets and convertible computers. Now Microsoft released a mature Windows 8.1 operating system with the ability to work on 7” displays along with a mature Surface 2 series of tablet computers. This has been underscored with other manufacturers offering keenly-priced 7”-8” Windows 8.1 tablets that run the Intel “Bay Trail” Atom processors.

This is very similar to what has come about with the regular computing market where three main platforms have surfaced in the form of the Apple Macintosh, Microsoft Windows and the open-source “desktop Linux” platform. The latter two have focused on the use of commonly-available hardware designs with commonly-available peripheral and network interfaces, thus allowing for low-cost systems to be built around these platforms.

Bridge devices

Convertible laptop-tablet devices

Sony VAIO Duo 11 slider-convertible tablet

Sony VAIO Duo 11

Since Windows XP offered “tablet with stylus” support, there have been a few so-called “convertible” laptops that become tablet computers. These computers appeared very much in a trickle of highly-priced business computers which were hard for most of us to come by. But Windows 8 with its touchscreen user interface,along with Android underscored this need for the “convertible” tablet-computer device.

These came in either a form with a fixed keyboard but having a screen that either swivelled or slid out, which is underscored by the Sony VAIO Duo 11; or a detachable-keyboard form where the keyboard was able to be unclipped from the tablet computer; which is underscored by the ASUS EeePad Transformer Prime or the HP x2 series. They legitimised the ability for one of these to work as a small content-creation laptop or a tablet that comes in to its own for browsing content.

The “phablet” or large-screen smartphone

Android users are also seeing more of the 5”-6” large-screen smartphones which are being referred to as “phablets” because the screen size is close to that for a small tablet. This was brought on by Samsung with their Galaxy Note series but Sony, HTC and others are pitching in to the game for this screen size. What is being valued here is more or less the small handheld device that comfortably works as a phone for making and taking calls.

Answering this trend

Something that can easily fall short in the “three-horse race” which describes the tablet market is the availability of apps for each of these platforms. This is manifest with the app stores for the iOS and Android platforms having more software available than what is currently available in the Windows Store for Windows 8.1 .

SBS and Facebook had made positive efforts to reach all the tablet platforms especially with Facebook offering a comprehensive “dashboard” app to the Windows Store for Windows 8 and 8.1 users.

But a problem that may affect the short-order and custom app-development scene, where apps are turned out for particular events and locations is that they will have to develop apps for three platforms each with their different interface abilities and needs. This same problem can affect the so-called “app-cessory” scene where devices are linked to a tablet or smartphone via USB, Bluetooth or the home network and benefit from an app that provides extended functionality.

As far as designing hardware accessories is concerned, it will be easier to design for the Android and the Windows 8.1 platforms. This is through these platforms encouraging an open-frame attitude when it comes to developing accessories and software for these tablets. Here, most of the connections used on devices that work to these platforms are designed around common industry standards. For that matter, it could allow the availability of low-cost tablets and similar devices that work on these platforms.

What I see of this

Once manufacturers present tablets that offer more that what the Apple iPad offers for a reasonable price but without a steep learning curve especially for computer novices, this could displace Apple’s market lead in this product space.

Similarly, a company offering a product form factor that impresses customers more than what is out there, whether in looks or functionality, can allow a particular tablet platform to break through more easily.

Official app for Facebook now on Windows 8.1

Facebook client for Windows 8Those of you who like using your Sony VAIO Tap 20, HP x2 Series, Sony VAIO Duo 11 or other Window 8 touch laptop to stalk on Facebook can now do so using a Facebook client that is written to be part of the operating system’s Modern user interface.

Here, you have a 3-pane dashboard with a presence list of the friends you interact with on the right-hand side, the News Feed in the centre of your screen and the grey “selection” menu on the left. The right hand top corner has a one-touch access point for status updates, pending friend requests and conversations that are taking place. There is the same ease in which you can browse what is available, including photos whether as a screen show or as a tiled arrangement.

I have even browsed through various photo albums in a “slide-show” view and the viewing experience comes across very smoothly. For example, when a photo initially appears, you see it looking soft and less detailed but it arrives with more detail coming through. There is the ability to zoom in on an image as well as flick through the slideshows.

Even mouse users, which covers most desktop users, are cared for because you can still use your rodent to scroll up and down using its thumbwheel. The thumbwheel works properly with scrolling the various columns for the News Feeds, the chat you are having, the presence list and the like independently – it depends on what you are actually hovering over. If you flip through photos in someone’s album, you can use the thumbwheel to “speed” through them. Using the SHIFT key with the thumbwheel allows you to detail in and out of the photos.

Its behaviour through a conversation is as expected but I would like to see a “typing” indicator so I can know if they are typing a reply at a particular moment.

This is certainly an application that appears to be mature from the start rather than one that is bug-ridden and failing too frequently. Give this a go on your Windows 8 laptop as something to work the Modern UI with.

Skully to develop a motorcycle helmet with heads-up display

Articles

Skully demonstrates GPS, rear-view camera in motorcycle helmet | The Car Tech blog – CNET Reviews

Skully fits heads-up display into motorcycle helmet | PC World

From the horse’s mouth

Skully Helmets

Home Page

My Comments

Those of us who use cars often take features like GPS satellite-navigation and rear-view cameras for granted. But motorcyclists feel left out because there isn’t a way to implement these technologies in a safe manner that works well for two wheels.

If a motorcyclist wants to use GPS navigation while riding their bike, they have to buy and use an expensive portable navigation device that is designed for motorcycle use and mount this to their machine’s handlebars. Or they have to seek out and purchase a smartphone dock that is designed to mount on a motorcycle’s handlebars and install their smartphone in that dock. Some of these accessories may not even look the part on certain bikes such as European-style scooters or “open-style” tourer bikes such as the Harley-Davidsons or Yamaha Viragos.

Now Skully have developed a motorcycle helmet that has an integrated GPS and rear-view camera. Here, this device uses a heads-up display that works independently of how you position the helmet’s visor to show the navigation graphics or the picture from the rear-view camera.

It has a Bluetooth link to your smartphone for updating map data but also provides access to telephony, music and voice-control features that your smartphone offers. THink of having a long ride while listening to your favourite music then telling your smartphone via Siri, S Voice or Google Voice to call the people whom you are seeing to let them know you’ll be there.

The Android-driven helmet has a battery runtime of 9 hours and can be charged using a microUSB data/charging cable connected to a computer or USB charger. It certainly shows that this is an invention that solves a problem many motorcyclists face and brings them on an even par to car drivers.

Use QR codes to point someone to your Facebook Profile

Articles

Facebook Adding QR Codes To Android App, Directing Scanners To Users’ Profiles? – AllFacebook

Facebook Adds QR Codes To Android App | 2D Code

My Comments

You are at the party or favourite bar and you have started to chat with someone very well. But you mention that you are on Facebook and they say that they are also on that same social network. You ask if it is OK to “friend them” on Facebook and they agree.

The next thing you do is ask for their name to search for them in your Facebook mobile app. This can be very difficult in a noisy environment or if they have a name that has a particular spelling or is one of many common names. Pick, pick, pick, pick, pick – you have found that person and are sending a “Friend Request”to them.

Now Facebook have improved on this for the latest version of their Android mobile client by using the QR code to simplify the profile-sharing process. Here, you bring up “Friends” in the drop-down menu. Then you tap “Find Friends” which shows the “People You May Know” list. Touch the “QR Code” button on the top right of your display to show a QR code that represents a link to your Profile.

If you are adding your companion to your Friends list, you then tap “Scan Code” and point your Android phone’s camera at the QR code that your companion is showing on their Android phone’s screen using this same client. This takes you to their Timeline which would have any “public” posts that are on it as well as the option to add them as a Friend.

I don’t see this as a controversial feature for Facebook because you have to be pulling up your Facebook Profile’s QR code in the presence of your companion who then has to use their device running the client app to scan that code – you are not intending to “friend them” behind their back.

This function could be taken further for businesses who have Facebook Pages or people who use Facebook Pages as a way to maintain a sanitised “public” profile. As well, if a person maintains a Page for their business or blog along with their personal Profile, the QR code could lead the user to a screen with an option to go to the Page which you then “like” to follow or the Profile with an option to “subscribe” (see only public Posts and Photos) or “add Friend” (be seen as a Facebook Friend with standard privileges).

Similarly, other social networks like Twitter and LinkedIn could implement this technology to allow people to attract followers or connections. NFC technology can also be exploited to achieve the same functionality as these QR codes for “there-and-then” access to contact profiles.

RCA to deliver an Android-powered three-piece AV system

Article

RCA’s Internet Music System blends detachable Android tablet, boombox | Engadget

My Comments

RCA is intending to turn the classic 3-piece bookshelf music system design on its head by using a touchscreen tablet as the centrepice of the system’s design.

This unit has what is expected for a bookshelf music system such as a CD player, an FM broadcast-radio tuner as well as a line input for other audio devices. But it usies an Android-powered 7” dockable tablet with access to the Google Play Store as its key feature.

When you detach the tablet from this music system, it implements a Bluetooth wireless link for sending the sound to the speakers while this tablet can link to the home network via Wi-Fi wireless technology. There is also an HDMI output so that one can put images or video like those YouTube videos or Facebook or Instagram pictures on a large flat-panel display.

Installing apps like Twonky Mobile or Bubble UPnP to this music system’s tablet will allow you to play what is on the NAS using the DLNA technology while adding TuneIn Radio, Spotify or last.fm brings online music services to the music system’s speakers.

From what I see, who know who else will put up a small music system that allows for this customisability through the use of an Android tablet.

HP offers a Wi-Fi Direct / NFC module for most existing business printers

Articles

HP LaserJet M1536dnf monochrome laser multifunction printer

HP LaserJet M1536dnf monochrome laser multifunction printer – now NFC and Wi-Fi Direct capable with a cheap module

HP outs NFC and wireless mobile printing solution for homes and offices | TechRadar

This little box adds NFC mobile printing to recent HP LaserJet, Officejet printers | PCWorld

HP Announces NFC Device For Printers | The Recycler

HP pousse le NFC sur presque toutes ses imprimantes | Le Monde Informatique (France – French language)

From the horse’s mouth

Hewlett-Packard

Product Sheet (PDF)

My Comments

HP have now cottoned on to the NFC “touch-to-print” model that Brother was involved along with the Wi-Fi Direct “own-access-point” printing model to allow people with mobile devices to print from their own devices without using the business’s main network.

But this is not about junking a perfectly-good printer that is still giving sterling service for your organisation. Instead it is in the form of a black box that connects to recent-issue compatible HP business printers, some of which I have reviewed here such as the Colour LaserJet Pro CM1415fnw multifunction printer, Colour LaserJet 400 Series printer, the LaserJet M1536dnf multifunction printer and the OfficeJet 150 mobile printer.

This device is in the form of a black box that connects to the printer’s USB port, has NFC “touch-and-go” print for Android and Windows 8, as well as the Wi-Fi Direct / own-access-point functionality which works with HP ePrint and with Apple’s AirPrint systems. HP’s larger “workhorse” printers and multifunctions have a similar option but this is in the form of a module that is installed in the existing printer on site. The device, known as the 1200w Mobile Printing Accessory is to be normally offered for USD$50 / EUR€36 but initially offered for USD$40/ EUR€29.

HP OfficeJet 150 mobile multifunction printer closed up

The HP OfficeJet 150 can be the fully-fledged mobile office with your iPad courtesy of the NFC Mobile Print module

The idea would be that if you aren’t keen on having clients or business partners marauding on your business network when they need hard copy from their mobile device, you have them use the separate printing network for their quick-run printing needs.

As for the OfficeJet 150, this accessory would allow one to create a “back-of-the-van” mobile office around their smartphone or tablet especially if the effort is to do away with the regular computing environment on the road. It is because the iOS and Android platforms with the HP-supplied or platform-native printing apps are intended to work with a Wi-Fi wireless network segment rather than the Bluetooth or USB connections this printer natively supports.

This is more about adding extra functionality to an existing device through the installation of an add-on module rather than replacing the existing device. It is a practice that is common to anyone who owns a hi-fi system or a TV, where they buy and connect extra equipment like CD players, tape decks, video recorders and DVD / Blu-Ray payers to add extra functionality to their existing systems. This avoids the need to do away with perfectly-good equipment to gain the extra functionality and, in some cases such as the video recorder, has added a lot more functionality like increased tuner capacity, stereo TV sound or remote control abilities.

This concept of offering the add-on devices can be seen as a way of effectively extending the life of most devices that are expected to put in a long service life and keeping their relevance to current needs and should never be tossed aside by device vendors.

Telstra now launches mobile data sharing in Australia

Articles

Telstra Launches Shared Data Plans | Gizmodo Australia

Telstra expands shared data plans | ITNews

Telstra Mobile Data Sharing: Everything You Need To Know | Lifehacker Australia

From the horse’s mouth

Telstra

Product Sheet

My Comments

I have done some previous coverage about shared data plans popping up in other countries like the USA and France. These provide a common data-allowance pool amongst a group of devices you or, in some cases with “family plans”, your family owns.

Now Telstra has jumped on the bandwagon with a shared data option which costs AUD$20 per month for each device. At the moment they are offering 1Gb extra of data to plans operated by early adopters as an incentive to take up this service across the multiple devices.

This is available to people who are contracted with the “Every Day Connect” mobile-service plans whether these are on a “bring-your-own-device” basis or part of a subsidised-handset contract. Here, I would see these of value with the Every Day Connect 80 plan or plans above that plan and with more than 2 devices beyond the regular handset.

I find that the tariff chart for this service will need some work to make it more acceptable by most customers. For example, Telstra could offer more of the high-capacity plans with perhaps high-capacity voice and text service in conjunction with the data sharing as well as post a simple tariff per device per month. They could offer their “Mi-Fi” devices and USB modems or the tablets that they sell for a subsidised cost to customers who integrate them in to a data-share plan/

But as I have seen with Telstra, these kind of services are charged in a way to prop up their role as a universal telephony service provider. They could easily provide services like these at better prices if Australia adopted a universal-service-fund which all carriers had to put money to and this was used to fund the basic telephone service, the public payphones, the Triple-Zero emergency call service and similar essential services.

The first door lock to exploit Bluetooth Smart technology

Article

Kwikset Kevo cylindrical deadbolt in use - Kwikset press imageLock Your Doors with Bluetooth Smart Technology | Bluetooth Blog

From the horse’s mouth

Kwikset

Product Page

Press Release

My Comments

Kwikset have released the first door lock to exploit the nascent Bluetooth Smart technology that is part of the iPhone 4 onwards as well as an increasing number of Android and Blackberry smartphones.

Like most of these “cutting-edge” electromechanical door locks, this unit is a “bore-through” cylindrical deadbolt, most likely because this form-factor is considered very popular on the American house’s front door. From the outside, the Kevo deadbolt looks like any other lock of this type but has a distinct blue ring that lights up under certain circumstances. This, and the fact that it still works with the regular key, keeps a perceived aesthetic and useability comfort zone that householders have valued with these locks.

But the Kevo deadbolt implements a proximity-based operation technique where you have a supplied key fob or a smartphone running the Kwikset Kevo app acting as the virtual key fob releasing this lock when you are near it from the outside. This will light up the blue ring on the outside and you touch the lock’s bezel to cause the bolt to retract/

Like most, if not all. of these “smart-locks”, the Kwikset deadbolt is its own access-control system with the ability to log when a person has opened the door. It also supports time-limited and “one-shot” keys so you can limit when a person has access to the premises, which is a boon with most of us who engage tradespeople, carers or even want to have friends and family around and factor in early arrivals. This even supports the ability to allow a user to send a key via email to another user which can play its part in many different ways such as a family member or friend who is lodging at your house while they are in town.

But the Kwikset Kevo deadbolt is more or less standalone in nature and not able to work with a home network. Personally, I would like to see this and other locks of this kind support the integration with home networks and home-automation systems either at purchase or through an aftermarket kit that exposes these functions to the network technology that you are using at a later date. The reason I support the use of an aftermarket kit is the fact that these products can be in service for many many years and upgrading towards newer network functionality should avoid the need to junk a perfectly good lockset.

This is one of many trends that are affecting the residential door lock and bringing this device towards the online and mobile era.

Gadget List–Best bets for setting the family house up for the Internet

Introduction

You may have read “Is it worth it to put full broadband in the family house”, which is an article that I wrote about going about setting up a fully-fledged home-network setup with wireline broadband at a house which ends up a “common property” for a family. Typically this place may be a house resided in by one or both of the parents or an occasionally-occupied “resource” property like a holiday house or city apartment.

Here I raised issues like the amount of “online” activity that would take place at this location, the availability of the full broadhand services including the packages and what kind of hardware to get if you go about this.

Your home network

Full broadband service

Netgear DG834G ADSL2 wireless router

A router that is part of a full broadband service

Firstly, identify whether there is either a landline telephone service or a cable TV service in place at the “Family House”. To the same extent, it is worth identifying whether next-generation broadband is available at this location.

A landline telephone service with a regular telephone may be considered highly important due to the desire for a robust ermergency contact arrangement and will be essential to the operation of a medical-alert system if you are dealing with elderly parents who are at a fragile point in their life.

Here, look at the information provided by the telephone service provider or cable-TV company for packages which include the broadband Internet service along with the telephone or cable-TV service.  Some of these packages may also integrate mobile service for your parents or relatives living there. This is more so when you have elderly parents who are loyal to a particular service provider for most of their lives and are hesitant to change providers.

The cheapest Internet-service packages may only suit very casual Internet use such as daily email checking and Web-browsing where regular use of online games (Facebook games, MiniClip, MSN Games, etc) or multimedia (YouTube, Spotify, etc) aren’t part of that activity. A mid-tier service may be more relevant with a busy household, or regular use of Internet-based communications and entertainment like Skype, YouTube, Spotify or Internet radio is expected to be the order of the day. This also includes a “Family House” situation that has relatives or friends who are regularly stopping by as part of business travel or you have teenagers and young adults who regularly visit that location.

Internet Gateway Devices

This is an important piece of equipment when you are getting the “Family House” on to a full broadband service. Here, if you are supplying your own modem router for a cable or ADSL service, you can opt for “wires-only” / “bring-your-own-device” services where the provider can enable the device at the office rather than supplying the equipment.

Most modest retail-grade broadband routers and ADSL modem routers with simultaneous 802.11a/g/n Wi-Fi LAN connectivity and four Ethernet LAN sockets would answer this need. If next-generation broadband is becoming very imminent, I would suggest that the router being purchased has Ethernet WAN connectivity and preferably have Gigabit Ethernet connectivity throughout.

You can get by with carrier-supplied equipment if it is known to work to a similar standard to the retail-supplied equipment. For example, if you are in France, you could get by with one of the newer triple-play “n-boxes” offered by Free or any of the other carriers there.

Network equipment

HomePlug AV segment

Western Digital LiveWire HomePlug AV Ethernet switch connected

The WD LiveWire HomePlug AV switch that fills in the network gap

A good practice with setting up the home network in this location is to create a HomePlug AV segment which uses the house’s AC wiring as its medium. This can be compliant to either the HomePlug AV 200Mbps standard or the newer HomePlug AV 500Mbps standard. The advantage of this medium is that it works on a wired medium without you needing to lay new wires, thus allowing you to set up a reliable semi-permanent network for fixed devices.

You can get going with this by purchasing a HomePlug AV kit and connecting one of the adaptors to the router and the other to another network device that uses an Ethernet connection in another room. These adaptors simply plug in to the nearest power outlet.

Here, the HomePlug AV multi-port switches like the WD LiveWire can come in to their own with clusters of AV equipment such as the TVs. This device provides a single on-ramp to the HomePlug AV segment for equipment like a smart TV, PVR and Blu-Ray player. As well, a spare single-port or multi-port “homeplug” adaptor can come in handy when you need to bring in a network-capable device on an “ad-hoc” basis. The example that I outline below is the situation where an adult child brings around a games console to either entertain the grandchildren or show off a game to his brothers.

HomePlug AV adaptor

A typical HomePlug AV adaptor that is worth keeping as a spare

Improving the Wi-Fi wireless segment

You may find that you don’t get good Wi-Fi wireless coverage across the house. This may be due to construction issues such as a thick brick or stone wall or extensive use of metal in the construction of a wall. Even the use of some heat-reflecting materials like Pilkington glass treatment or aluminium-lined insulation may affect radio waves that are part of a Wi-Fi wireless network.

You can answer this problem through the use of a Wi-Fi access point that is connected to your Internet router via a wired backbone such as the HomePlug AV segment. Infact there are some access points that connect directly to a HomePlug AV segment and effectively do their job as an extension access point.

On the other hand, you can repurpose an older router with the same wireless-network technology as your current Internet router as an access point. Here, you have to disable DHCP and allocate it a unique IP address within your network.

Computer equipment

Sony VAIO Duo 11 slider-convertible tablet

Sony VAIO Duo 11

Most portable and transportable computer equipment can work well in the “family house” to underscore the notion of lifestyle computing there. Here, I am thinking of the idea of using these computers around the house and out in the garden to manage email, news, media and similar activities.

  • Apple iPad (tablet, iOS, 10” 4:3 screen)
  • HP Envy x2 (detachable tablet, Windows 8, 11” widescreen) – review
  • Dell XPS 12 (convertible notebook, Windows 8, 11” widescreen)
  • Sony VAIO Duo 11 (slider convertible notebook, Windows 8, 11” widescreen ) – review
  • Toshiba Satellite U920t (slider convertible notebook, Windows 8, 12” widescreen)
  • Sony VAIO Duo 13 (slider convertible notebook, Windows 8, 13” widescreen)
  • Lenovo ThinkPad Tablet (tablet, Android, 10” widescreen) – review
  • Sony VAIO Tap 20 (adaptable all-in-one tablet, Windows 8, 20” widescreen)
    Sony VAIO Tap 20 adaptive all-in-one computer as a desktop

    Sony VAIO Tap 20 – an example of an “adaptive all-in-one” computer

    review

  • HP Envy Rove 20 (adaptable all-in-one tablet, Windows 8, 20” widescreen)
  • Samsung Galaxy Tab 3 series (tablet, Android, 8.9” widescreen)
  • Google Nexus 10 Series (tablet, Android, 10” widescreen)

Printers

Network-capable multifunction printers work well for turning out hard-copy documents. Here, features like the availability of extra-yield cartridges as an option and auto-duplex (double-sided) printing are a must. As well, pay attention to units that use four or more ink cartridges and make sure that you can choose between standard-capacity and high-capacity cartridges so you can choose the capacity that suits the amount of usage your machine is going to have but cater for particular seasons of use.

Fax-capable printers can work as a good substitute to those economy “plain-paper” fax machines that use a thermal-transfer ribbon to print on to the paper which can be costly to run.

HP Envy 120 designer all-in-one printer

HP Envy 120 designer all-in-one inkjet printer

  • HP Envy 120 inkjet all-in-one (review) – a neat stylish all-in-one with duplex printing and its own email address
  • HP Photosmart 7520 inkjet all-in-one with fax – an elegant option that can offers photo printing, colour faxing and separately-replaceable cartridges so you can get rid of that old half-dead costly-to-run fax
  • Brother DCP-J925DW inkjet all-in-one without fax (review)  – an elegant machine that has basic A4 duplex print and a photo tray
  • Brother MFC-J825DW inkjet all-in-one with fax – similar to the DCP-J925DW but is equipped with the colour fax functionalityBrother DCP-J925DW multi-function printer
  • Brother MFC-J4410DW inkjet all-in-one – low-tier version of the MFC-J4710DW reviewed on this site

DLNA Home Media Network

The home network offers up plenty of resources for entertainment and, in some cases, communications. Here, it could be to create a reserve of content that can be “pulled up” and played at a moment’s notice or you simply pulling in content from an online resource like a catch-up TV service, Spotify or an Internet stream hosted by a radio station in your home country or country you love so much.

Network Attached Storage with DLNA

Seagate GoFlex Home NAS - an example of an entry-level NAS

Seagate GoFlex Home NAS

A network-attached storage device allows you to store and retrieve data via the network without having to keep a computer switched on all the time. Similarly, the computer doesn’t underperform due to it handling data that it keeps for other devices.

The ability to use common standards to add and view content is very important. For example, using the SMB standards to transfer content to and from a NAS is important if you use a portable computer based on a regular-computing operating system like Windows, Mac OS X or Linux. Similarly, you can add a file manager to most Android and iOS devices so you can transfer files out between these devices and a NAS.

The DLNA requirement is important for whenever you want to gain access to audio, photo and video files from that smart TV or Blu-Ray player.

  • WD MyBook Live
  • Seagate Central
  • Seagate GoFlex Home (review)

Some Internet gateway devices have the ability to be connected to a USB hard disk and work also as a network-attached storage device. These typically provide SMB-compliant file transfer from regular computers and also have DLNA and / or iTunes media server functionality.

TV or video peripheral with DLNA and / or Skype

Here, I am covering either Internet-enabled TV sets which come in to their own if the goal is to upgrade one of the TV sets, especially any set installed in any of the main living areas. On the other hand, I would recommend using Internet-enabled video peripherals like Blu-Ray players / home-theatre systems, games consoles or Skype cameras where a TV is working very well and satisfying the current needs for the area it is installed in.

  • Most recently-built Samsung, Sony, LG or Panasonic smart TVs. These sets come with online video, DLNA player / renderer, and Skype functionality on most currently-built units, if not all of the units of the popular screen sizes. You could even consider the Skype cameras that the manufacturers make available for these sets so you can run them as a large-screen Skype videoconferencing terminal which is a feature I recommend for families separated by distance.
  • Panasonic Blu-Ray players especially the DMP-BDT220 which offers Skype and DLNA at a reasonable price for a good-quality machine even with the TY-CC20W Skype camera. The Panasonci SCC-BT480 Blu-Ray home-theatre system and similar models in the Panasonic lineup are enabled for Skype and DLNA, which can be of value if you are factoring in a home theatre system with the speakers in to the equation. These use the same Panasonic Skype camera to work as a Skype terminal and exploit the speakers so you can hear the people whom you are talking to clearly. More expensive models in this lineup offer the Viera Cast smart-TV functionality so you can enable other TVs to become smart TVs and have access to online content.
  • The Sony BDP-S390 Blu-Ray player (review)
    Sony BDP-S390 Blu-Ray Disc Player

    Sony BDP-S390 Network Blu-Ray Player – a Blu-Ray player that adds DLNA to an existing TV

    and the newer Sony Blu-Ray home-theatre systems add smart-TV functionality and DLNA connectivity to existing TV sets. But they don’t offer Skype connectivity which may put you back if you are thinking of Skype on your TV at affordable costs. The mid-range and premium Sony Blu-Ray players also are Skype ready with the same optional Sony camera if you are considering this function for your TV set.

  • The Logitech TV Cam HD Skype camera which simply adds Skype functionality to most flat-screen TVs.

Games consoles

Sony PS3 games console

Sony PS3 games console – best brought around as needed

You may think of keeping a games console connected to a TV at the “Family House” but this may work if you have a TV in a secondary lounge area and the console is going to be used by the grandchildren. On the other hand, one of the adult children who owns a games console can bring it to the “Family House” on an as-needed basis and connect it up to the TV there especially if the idea is to entertain the younger children.

But they would need to have it be part of the “Family House’s” home network and this setup routine for the Wi-Fi network only needs to be done the first time a Wi-Fi-equipped console is used there. On the other hand, the previously-mentioned spare “homeplug” can come in handy for linking a console that has an Ethernet socket on it to the home network. Of course, some older people may find that the games console would be difficult to use, including playing a game or navigating the user interface. These are best used when you are with the younger people who regularly play games on these devices.

Network-enabled music systems, wireless speakers and receivers

Sony CMT-MX750Ni Internet-enabled micro music system

Sony CMT-MX750Ni 3-piece music system

These music-system and receiver suggestions can fit the bill of you want something that can play content held on the DLNA-capable NAS or take advantage of online media resources such as Spotify or the “new short wave” i.e. Internet radio.

  • Sony CMT-MX750Ni music system. (review) This system has FM and DAB+ for regular broadcast radio, a CD player as well as an iPod dock. But it can work with DLNA-hosted media content as well as online music services including Internet radio.
  • Sony CMT-SBT300WB music system – This is anther 3-piece music system that follows on from the CMT-MX750Ni music system but uses Bluetooth local connectivity as an audio path as well as being able to connect to your home network and supporting AirPlay functionality for Apple devices.
  • Denon CEOL and CEOL Piccolo music systems (review).
    Denon CEOL music system (Image courtesy of Denon)

    Denon CEOL music system

    These systems work as part of the DLNA Home Media Network and can pull in online music sources including Internet radio and Spotify. They also have an iPod dock and support Apple AirPlay but the CEOL also has a CD player and FM radio tuner.

  • Onkyo TX-8050 Stereo receiver. If you are thinking of a stereo receiver rather than a home-theatre surround receiver, this Onkyo unit can also provide access to
  • Most home-theatre surround-sound receivers that are placed in the mid-tier of the market also come with home network abilities including DLNA, Spotify, Internet radio and the like.  But listening to audio-focused content on a lot of these systems typically requires you to use the TV to navigate for the content.
  • Marantz Audio Consolette speaker dock (review).
    Marantz Audio Consolette speaker dock

    Marantz Audio Consolette speaker dock

    This is one of a few iPhone speaker docks that connect to the home network as a wireless speaker for Airplay and DLNA-capable mobile devices or an Internet radio, yet yield that high-grade sound.

  • Boston Acoustics MC-i200 Air wireless speaker (review). One of a few wireless speakers that excel on the sound but works primarily with your home network.
  • Denon Cocoon speaker docks – A more affordable speaker-dock setup that doubles as an Internet radio or can accept the popular iPhone 4S or iPod Classic.
  • Sony SA-NS410 wireless speaker (review) – A DLNA / AirPlay wireless speaker that can be used around the house and doubles as an Internet radio
  • Sony SA-NS510 portable wireless speaker (review) – A highly-portable DLNA / AirPlay wireless speaker with Internet radio functionality that runs on its own batteries thus being appealing for the garden or other outdoor use.

Network audio devices

NAD C448 network media tuner

NAD C448 network media tuner connected to an amplifier

These units can be connected to a regular stereo or home-theatre system via a vacant line-level input to serve as an audio-focused network media player. They also have an integrated broadcast-radio tuner which you may use in lieu of the FM or AM tuner that is part of your system or could replace a regular tuner component for broadcast-radio reception.

  • Sangean WFT-1 FM/DAB+/Internet network audio tuner – An economical way to add digital broadcast radio, Internet radio and network-hosted audio to your sound system
  • NAD C448 FM/AM/DAB+/Internet network audio tuner – The first “full-band” hi-fi tuner and network audio adaptor with serious hi-fi credentials
  • Onkyo T-4070 FM/AM/DAB+ Internet network audio tuner – Onkyo’s “full-band” tuner and network media adaptor for the hi-fi system
  • Denon DNP-720AE FM/AM/Internet network audio tuner – A similar “FM/AM/Internet” tuner with network media playback for the hi-fi system.
  • Yamaha CD-N500 Network CD player – This CD player can come in handy with a sound system or speaker dock by being able to play CDs as well as tuning in to Internet radio or playing content held on your network-attached storage

Conclusion

Of course, there are better and newer devices that would fill the needs for a house that either serves as an older parent’s residence or commonly-resource property as well as a family hub.

The PS4 to benefit from a companion mobile app in November

Articles

PlayStation companion app for iOS, Android due in November | Internet & Media – CNET News

Sony to Launch PS4 Companion App in November | Mashable

My Comments

Sony is intending to add value to the PlayStation 4 platform by releasing a companion app for the iOS and Android mobile platforms that works with this console.

But what benefits will it offer to the gamers who use this app and associate it with their console? One would be to exploit the smartphone’s or tablet’s screen as a second screen which would come in to play with a wide range of games. For example, the screen could be used to show a leaderboard or scoreboard for a game while using the big screen just for the gameplay activity. Some adventure-based games may implement this second screen as an always-displayed map of either the game’s whole world or area of local relevance so as to help with fulfilling a particular quest.

The other main benefit is to have the mobile device serve as a controller, which I would see as improving the gameplay experience for some games and players. The touchscreens offered by these devices could allow for intuitive positioning of players in a sports game or could make it real for a strategy game to be played on a console.

Sony is also intending to make these devices become a path to the PlayStation Network online gaming service such as to see what others are playing and how they are performing as well as buying games and downloadable content using the mobile device for delivery to your PS4.

What I like of this is that various gaming tasks can be made more intuitive for more players by exploiting the touchscreen rather than hammering D-pads and buttons to configure a game’s participant. Similarly, it could open the path for other games types to be playable on consoles rather than just on regular computers or mobile devices.

Similarly it could open up the games consoles to user classes other than the teenage or young-adult males of this world by making them easier to use by older people or women.